Seismic response of pile foundations in liquefiable soil: parametric study

The performance of pile foundations in liquefiable soil subjected to earthquake loading is a very complex process. The strength and stiffness of the soil decrease due to the increase in pore pressure. The pile can be seriously destroyed by the soil liquefaction during strong earthquakes. This paper presents the response of vertical piles in liquefiable soil under seismic loads. A finite difference model, known as fast Lagrangian analysis of continua, is used to study the pile behavior considering a nonlinear constitutive model for soil liquefaction and pile?Csoil interaction. The maximum lateral displacement and maximum pile bending moment are obtained for different pile diameters, earthquake predominant frequencies, Arias intensities, and peak accelerations. It is found that the maximum lateral displacement and the maximum pile bending moment increase when the predominant earthquake frequency value decreases for a given peak acceleration value.     

Mechanical and Physical Characterization of Tabriz Marls, Iran

Three types of marls can be found in the Tabriz area (Iran): yellow, green, and gray/black marls. In the present paper, strength and deformation characteristics of Tabriz marls and their stress–strain behavior are investigated by various in situ and laboratory tests. In order to study the deformation behavior of these marls, various experiments such as the pressuremeter test, plate loading test (PLT), seismic wave velocity test, uniaxial compression test, standard penetration test (SPT), and direct shear test were carried out. Ranges of strain at the elastic and failure points were determined. Young’s and shear modulus were obtained. Test results showed that the strength characteristics increase with depth. The value of deformation modulus determined by the pressuremeter test was in good agreement with those obtained from the PLT. This implies that pressuremeter is a suitable in situ test for characterizing the deformation modulus of marl. Deformation modulus obtained from pressuremeter and plate loading tests were approximately 4–5 times the results of uniaxial compressive test and the deformation modulus obtained from seismic data was about 30–50 times the static deformation modulus. Stress–strain curves showed that the maximum value of strain at the elastic and failure points and the minimum value of strength and deformation modulus are corresponding to the yellow marls while the minimum value of strain and the maximum value of strength and deformation modulus are corresponding to the gray/black marls. Some empirical relationships between different characteristics of Tabriz marls were also derived.     

Experimental Designs Applied to Desorption of Dichromate Ions after Separation and Preconcentration from Natural and Industrial Water by Modified Nano‐Alumina

Nano‐alumina modified by 9‐aminoacridine was used as a sorbent for separation and determination of dichromate ions from water. Statistical method, based on surface response design, has been used for the optimization of dichromate ions elution from 9‐aminoacridine nano‐alumina. The adsorbed dichromate ions were found to be eluted quantitatively with 0.8 mol L^?1 KCl in 1.6 mol L^?1 NaOH which optimized by response surface design. Under optimum conditions, the accuracy, precision (relative standard deviation, RSD%) and R‐square of the method were calculated as >98, <3, and >94%, respectively. Remarkable agreement between experimental and theoretical data was confirmed the predicted assumption. The method was applied to the simultaneous determination of dichromate in natural and industrial water samples. We also examined the retention of dichromate anions in the presence of Cl^?, , and anions at pH 3.     

Potential of Oil Palm Trunk Sap as a Novel Inexpensive Renewable Carbon Feedstock for Polyhydroxyalkanoate Biosynthesis and as a Bacterial Growth Medium

Utilization of cheap renewable carbon feedstock for polyhydroxyalkanoate (PHA) production not only brings down its production cost but also ensures sustainability. The scope of this study was to evaluate the potential of sap extracted from felled oil palm trunk (OPT) as a novel inexpensive renewable carbon source for PHA production. OPT sap was found to be nutritionally rich and contained various fermentable sugars (5.5% w/v) as its major constituent. Termite gut isolate, Bacillus megaterium MC1 grew profoundly in mineral medium with OPT sap as carbon source and a cell density of 10.9 g/L was attained after 16 h of cultivation in shake flask cultures. A maximum poly‐3‐hydroxybutyrate [P(3HB)] content (% cell dry weight; CDW) of 30 wt% and a P(3HB) concentration of 3.28 g/L was recorded. Additionally, OPT sap extracted from younger tree trunks with prolonged storage had higher sugar content (10.8% w/v) and, when used as a growth medium without the addition of any nutrients, supported bacterial growth comparable to commercially available media.     

On the possible origin of X-rays in long laboratory sparks

In this paper, based on theoretical estimation of the achievable electric fields during the physical development process of a long spark under different conditions, we show that the encounter of negative and positive streamer fronts just before the final breakdown is one scenario, under which the observed X-ray bursts in long sparks is highly possible. Our calculations show that for example in an 80 cm long rod–sphere air gap at atmospheric pressure with negative lightning impulse breakdown voltage of about 925 kV, electrons are accelerated to values in the range of 100–300 keV during the encounter. Subsequently, these electrons gain more energy moving through the potential gradient of the positive streamer region. The total gain of energy by electrons may reach 300–500 keV. The results also show that negative discharges can produce more energetic electrons than positive. If the suggested mechanism of X-ray production in long sparks is correct, then the X-ray burst may consist of several pulses closely spaced in time. Time resolved photography in simultaneous measurement of X-rays would be able to confirm this prediction.     

A two-step wavelet-based regularization for linear inversion of geophysical data

Regularization methods are used to recover a unique and stable solution in ill-posed geophysical inverse problems. Due to the connection of homogeneous operators that arise in many geophysical inverse problems to the Fourier basis, for these operators classical regularization methods possess some limitations that one may try to circumvent by wavelet techniques.
In this paper, we introduce a two-step wavelet-based regularization method that combines classical regularization methods with wavelet transform to solve ill-posed linear inverse problems in geophysics. The power of the two-step wavelet-based regularization for linear inversion is twofold. First, regularization parameter choice is straightforward; it is obtained from a priori estimate of data variance. Second, in two-step wavelet-based regularization the basis can simultaneously diagonalize both the operator and the prior information about the model to be recovered. The latter is performed by wavelet-vaguelette decomposition using orthogonal symmetric fractional B-spline wavelets.
In the two-step wavelet-based regularization method, at the first step where fully classical tools are used, data is inverted for the Moore-Penrose solution of the problem, which is subsequently used as a preliminary input model for the second step. Also in this step, a model-independent estimate of data variance is made using nonparametric estimation and L-curve analysis. At the second step, wavelet-based regularization is used to partially recover the smoothness properties of the exact model from the oscillatory preliminary model.
We illustrated the efficiency of the method by applying on a synthetic vertical seismic profiling data. The results indicate that a simple non-linear operation of weighting and thresholding of wavelet coefficients can consistently outperform classical linear inverse methods.     

Mass,Volume and Velocity of the Antarctic Ice Sheet: Present-Day Changes and Error Effects

This study examines present-day changes of the Antarctic ice sheet (AIS) by means of different data sets. We make use of monthly gravity field solutions acquired by the Gravity Recovery and Climate Experiment (GRACE) to study mass changes of the AIS for a 10-year period. In addition to ‘standard’ solutions of release 05, solutions based on radial base functions were used. Both solutions reveal an increased mass loss in recent years. For a 6-year period surface-height changes were inferred from laser altimetry data provided by the Ice, Cloud, and land Elevation Satellite (ICESat). The basin-scale volume trends were converted into mass changes and were compared with the GRACE estimates for the same period. Focussing on the Thwaites Glacier, Landsat optical imagery was utilised to determine ice-flow velocities for a period of more than two decades. This data set was extended by means of high-resolution synthetic aperture radar (SAR) data from the TerraSAR-X mission, revealing an accelerated ice flow of all parts of the glacier. ICESat data over the Thwaites Glacier were complemented by digital elevation models inferred from TanDEM-X data. This extended data set exhibits an increased surface lowering in recent times. Passive microwave remote sensing data prove the long-term stability of the accumulation rates in a low accumulation zone in East Antarctica over several decades. Finally, we discuss the main error sources of present-day mass-balance estimates: the glacial isostatic adjustment effect for GRACE as well as the biases between laser operational periods and the volume–mass conversion for ICESat.     

Interannual variability of Mediterranean evaporation and its relation to regional climate

Gridded monthly evaporation data for 1958–2006 from the Woods Hole Oceanographic Institution data set are used to investigate interannual variability of Mediterranean evaporation during cold and hot seasons and its relation to regional atmospheric dynamics, sea surface temperature and atmospheric elements of the hydrological cycle. The first EOF mode of Mediterranean evaporation, explaining more than 50% of its total variance, is characterized by the monopole pattern both in winter and summer. However, despite structural similarity, the EOF-1 of Mediterranean evaporation is affected by different climate signals in cold and hot seasons. During winter the EOF-1 is associated with the East Atlantic teleconnection pattern. In summer, there is indication of tropical influence on the EOF-1 of Mediterranean evaporation (presumably from Asian monsoon). Both in winter and summer, principal components of EOF-1 demonstrate clear interdecadal signals (with a stronger signature in summer) associated with large sea surface temperature anomalies. The results of a sensitivity analysis suggest that in winter both the meridional wind and the vertical gradient of saturation specific humidity (GSSH) near the sea surface contribute to the interdecadal evaporation signal. In summer, however, it is likely that the signal is more related to GSSH. Our analysis did not reveal significant links between the Mediterranean evaporation and the North Atlantic Oscillation in any season. The EOF-2 of evaporation accounts for 20% (11%) of its total variance in winter (in summer). Both in winter and summer the EOF-2 is characterized by a zonal dipole with opposite variations of evaporation in western and eastern parts of the Mediterranean Sea. This mode is associated presumably with smaller scale (i.e., local) effects of atmospheric dynamics. Seasonality of the leading modes of the Mediterranean evaporation is also clearly seen in the character of their links to atmospheric elements of the regional hydrological cycle. In particular, significant links to precipitation in some regions have been found in winter, but not in summer.