Reservoir Quality Assessment of the Upper Permian Chhidru Formation,Salt and Surghar Ranges,Pakistan

The Late Permian succession of the Upper Indus Basin in northeastern Pakistan is represented by the carbonate-dominated Zaluch Group, which consists of the Amb, Wargal and Chhidru formations, which accumulated on the southwestern shelf of the Paleo-Tethys Ocean, north of the hydrocarbon-producing Permian strata of the Arabian Peninsula. The reservoir properties of the mixed clastic-carbonate Chhidru Formation (CFm) are evaluated based on petrography, using scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX) and x-ray diffraction (XRD) techniques. The diagenetic features are recognized, ranging from marine (isopachous fibrous calcite, micrite), through meteoric (blocky calcite-I, neomorphism and dissolution) to burial (poikilotopic cement, blocky calcite-II-III, fractures, fracture-filling, and stylolites). Major porosity types include fracture and moldic, while inter- and intra-particle porosities also exist. Observed visual porosity ranges from 1.5%–7.14% with an average of 5.15%. The sandstone facies (CMF-4) has the highest average porosity of 10.7%, whereas the siliciclastic grainstone microfacies (CMF-3) shows an average porosity of 5.3%. The siliciclastic mudstone microfacies (CMF-1) and siliciclastic wacke-packestone microfacies (CMF-2) show the lowest porosities of 4.8% and 5.0%, respectively. Diagenetic processes like cementation, neomorphism, stylolitization and compaction have reduced the primary porosities; however, processes of dissolution and fracturing have produced secondary porosity. On average, the CFm in the Nammal Gorge, Salt Range shows promise and at Gula Khel Gorge, Trans-Indus, the lowest porosity.     

On the cratonization of the Arabian-Nubian Shield:Constraints from gneissic granitoids in south Eastern Desert,Egypt

The Shaitian granite complex(SGC) spans more than 80 Ma of crustal growth in the Arabian–Nubian Shield in southeast Egypt.It is a voluminous composite intrusion(60 km~2) comprising a host tonalite massif intruded by subordinate dyke-like masses of trondhjemite,granodiorite and monzogranite.The host tonalite,in turn,encloses several,fine-grained amphibolite enclaves.U-Pb zircon dating indicates a wide range of crystallization ages within the SGC(800 ± 18 Ma for tonalites;754 ± 3.9 Ma for trondhjemite;738 ± 3.8 Ma for granodiorite;and 717 ± 3.2 Ma for monzogranite),suggesting crystallization of independent magma pulses.The high positiveεNdi(+6–+8) indicate that the melting sources were dominated by juvenile material without any significant input from older crust.Application of zircon saturation geothermometry indicates increasing temperatures during the generation of melts from 745 ± 31 ℃ for tonalite to 810 ± 25 ℃ for trondhjemite;840 ± 10 ℃ for granodiorite;and 868 ± 10 ℃ for monzogranite.The pressure of partial melting is loosely constrained to be below the stability of residual garnet(10 kbar) as inferred from the almost flat HREE pattern((Gd/Lu)N= 0.9–1.1),but 3 kbar for the stability of residual amphibole as inferred from the significantly lower NbNand TaNcompared with LREENand the sub-chondrite Nb/Ta ratios exhibited by the granitic phases.The inverse relation between the generation temperatures and the ages estimates of the granitoid lithologies argue against a significant role of fractional crystallization.The major and trace element contents indicate the emplacement of the SGC within a subduction zone setting.It lacks distinctive features for melt derived from a subducted slab(e.g.high Sr/Y and high(La/Yb)Nratios),and the relatively low MgO and Ni contents in all granite phases within the SGC suggest melting within the lower crust of an island arc overlying a mantle wedge.Comparison with melts produced during melting experiments indicates an amphibolite of basaltic composition is the best candidate as source for the tonalite,trondhjemite and granodiorite magmas whereas the monzogranite magma is most consistent with fusion of a tonalite protolith.Given the overlapping Sm-Nd isotope ratios as well as several trace element ratios between monzogranite and tonalite samples,it is reasonable to suggest that the renewed basaltic underplating may have caused partial melting of tonalite and the emplacement of monzogranite melt within the SGC.The emplacement of potassic granite(monzogranite) melts subsequent to the emplacement of Na-rich granites(tonalitetrondhjemite-granodiorite) most likely suggests major crustal thickening prior arc collision and amalgamation into the over thickened proto-crust of the Arabian-Nubian shield.Eventually,after complete consolidation,the whole SGC was subjected to regional deformation,most probably during accretion to the Saharan Metacraton(arc–continent collisions) in the late Cryogenian-Ediacaran times(650–542 Ma).     

Anthropogenic Decline of Ancient,Sustainable Water Systems: Qanats

Qanat is an ancient underground structure to abstract groundwater without the need for external energy. A recognized world heritage, Qanat has enabled civilization in arid and semi-arid regions that lack perennial surface water resources. These important structures, however, have faced significant challenges in recent decades due to increasing anthropogenic pressures. This study uses remote sensing to investigate land-use changes and the loss of 15,983 Qanat shafts in the Mashhad plain, northeast of Iran, during the past six decades. This entails obtaining a rare aerial imagery from 1961, as well as recent satellite imagery, over a region with the highest density of Qanats in Iran, the birthplace of Qanat. Results showed that only 5.59% of the Qanat shafts in 1961 remained intact in 2021. The most prominent Qanat-impacting land-use changes were agriculture and urban areas, that accounted for 42.93 and 31.81% Qanat shaft destruction in the study area, respectively. This study also showed that groundwater table decline, demographic changes, and reduction in the appeal of working in the Qanat maintenance and construction industry among the new generation are existential threats to Qanats, and may result in the demise of these ancient structures in the future. Findings of this study can be used for urban planning in arid and semi-arid areas with the aim of protecting these historic water structures.     

Angular distribution of radiation in an isotropically scattering slab

The equation of radiative transfer in an isotropically scattering slab subject to general boundary conditions is solved. The Padé approximation technique is used to calculate the reflected and transmitted angular distributions. Numerical results for angular distributions through and at the boundaries of a finite slab are calculated by the Padé approximation technique. The results for a Padé approximation of [0/1] are compared with results obtained by the Galerkin method.     

Radiation transfer in a diffuse and specular reflecting slab with Rayleigh scattering

A method of analysis is presented for solving the radiative transfer problem in an absorbing, emitting, inhomogeneous, and anisotropically scattering plane-parallel medium with specular and diffuse reflecting boundaries and internal source (problem 1). Exact relations for the radiation heat flux at the boundaries of problem 1 are obtained in terms of the radiation density and albedos of the corresponding source-free medium with specular reflecting boundaries (problem 2). Two coupled integral equations for the radiation density and the second moment of the radiation intensity for problem 2 with Rayleigh phase functions are obtained. The Galerkin method is used to solve these equations. Albedos of problem 2 are compared with theF _n method. Numerical results for radiation heat fluxes at the boundaries of problem 1 are tabulated for different forms of the internal source.     

Photometric observations and light curve analysis of ST Aquarii

The system of ST Aquarii has been observed inB andV filters at KOTTAMIA Observatory in Egypt. Two light curves have been obtained and new times of minima have been calculated.The light curves have been analysed using the theory of Fourier transform of light changes in frequencydomain, and new geometrical and physical elements have been obtained.     

Energy albedo for multiregion slabs

An asymptotic solution for the equation of radiative transfer in an inhomogeneous medium was obtained on the basis of the corresponding solutions for homogeneous sub-layers in the slowing down region. Function relations between the reflection and transmission coefficients for the whole slab and those of the sublayers are given. The invariant embedding concepts are used to get the reflection and transmission coefficients for the sub-layers. We assumed different models for the slowing-down kernels. Laplace transform was used to transform the Boltzmann equation to one velocity approximation with re-scaled mean-free path and single-scattering albedo. Numerical results are given for energy albedo as a function of the mass number of the host medium.     

ASTER Spectral Analysis for Host Rock Associated with Porphyry Copper-molybdenum Mineralization

This study is an attempt to understand the application of spectral image processing methods to ASTER data for mapping host rock associated with porphyry copper-molybdenum mineralization. The application of remote sensing in identifying variations in surface mineralogy, structural elements, and lithologic contacts can help in identifying such relations. Signatures collected from the Advanced Spaceborne Thermal Emission Reflection Radiometer (ASTER) data is used to map the host rock of Zafarqand area. The study area is located in the central segment of the Urumieh–Dokhtar volcanic belt of Iran. The Urumieh-Dokhtar is a potential zone for exploration of new porphyry copper deposits. Band ratio, band math, false colour composites and principal component analysis techniques are used to refine the different lithologic units in the area. These methods showed the discrimination of acidic igneous rock from intermediate igneous rock and the boundary between igneous rocks using the shortwave infrared bands (SWIR) of ASTER at regional scale. Results have proven to be effective and in accordance with the results of field observations, ore microscopy examination and with reference geological map. In conclusion, the image processing methods used can provide cost-effective information to discover possible locations of porphyry copper and epithermal gold mineralization prior to detailed and costly ground investigations. The extraction of spectral information from ASTER data can produce comprehensive and accurate information for copper and gold resource investigations around the world, including those yet to be discovered.     

Investigation of Soil Conditioning Tests with Three-Dimensional Numerical Modeling

Due to the diverse and complex structure of soil and the variety of foam-modifier materials that are used, it is difficult to provide a model to predict the laboratory behavior of modified soils. For example, several studies have shown independently that the amount of the foam-modified soil depends on several factors, such as the internal friction angle and normal stiffness. Of late, modeling by numerical methods has become popular in engineering sciences and the modeling of complex material behavior is possible with the help of numerical methods. In this research, the performance and efficiency of the numerical method in the modeling of laboratory tests such as the slump test and the uniaxial compressive strength test were investigated and it was found that numerical modeling performs very well in predicting the results of these tests for foam-modified sand samples. In order to achieve this goal, the slump test and the uniaxial compressive strength test were performed in the laboratory on several modified sand samples in order to obtain the laboratory results for these samples. Then, numerical simulation of these experiments was carried out using PFC^3D software. The results of numerical modeling were compared with the experimental results, and good agreement was observed. Finally, after calibration of the numerical model using the experimental results, the effect of changes in the internal friction angle and the normal stiffness of the modified sand in the amount of the slump was investigated. According to the results of this sensitivity analysis, it was determined that by increasing both effective parameters the amount of the slump of foam-modified sand decreases and that the parameters are the most important factors in controlling the slump value.     

Application of frequency ratio,statistical index,and weights-of-evidence models and their comparison in landslide susceptibility mapping in Central Nepal Himalaya

The Mugling–Narayanghat road section falls within the Lesser Himalaya and Siwalik zones of Central Nepal Himalaya and is highly deformed by the presence of numerous faults and folds. Over the years, this road section and its surrounding area have experienced repeated landslide activities. For that reason, landslide susceptibility zonation is essential for roadside slope disaster management and for planning further development activities. The main goal of this study was to investigate the application of the frequency ratio (FR), statistical index (SI), and weights-of-evidence (WoE) approaches for landslide susceptibility mapping of this road section and its surrounding area. For this purpose, the input layers of the landslide conditioning factors were prepared in the first stage. A landslide inventory map was prepared using earlier reports, aerial photographs interpretation, and multiple field surveys. A total of 438 landslide locations were detected. Out these, 295 (67 %) landslides were randomly selected as training data for the modeling using FR, SI, and WoE models and the remaining 143 (33 %) were used for the validation purposes. The landslide conditioning factors considered for the study area are slope gradient, slope aspect, plan curvature, altitude, stream power index, topographic wetness index, lithology, land use, distance from faults, distance from rivers, and distance from highway. The results were validated using area under the curve (AUC) analysis. From the analysis, it is seen that the FR model with a success rate of 76.8 % and predictive accuracy of 75.4 % performs better than WoE (success rate, 75.6 %; predictive accuracy, 74.9 %) and SI (success rate, 75.5 %; predictive accuracy, 74.6 %) models. Overall, all the models showed almost similar results. The resultant susceptibility maps can be useful for general land use planning.