CEMPS: A prototype spatial decision support system to aid in planning emergency evacuations

CEMPS is a prototype spatial decision support system which links the topographical support and analysis provided by a geographic information system, ARC/INFO, with the ability to simulate the dynamics of an evacuation process. CEMPS has been designed to enable emergency planners to experiment with different emergency evacuation plans in order to devise a plan which meets their requirements. ARC/INFO is used to parameterize a dynamic simulation with topographical information and to display its results. The prototype runs on a Sun SPARCStation cluster but could be modified to run on other hardware and software.     

Raft-like Metabasaltic Inclusions in the Fongen-Hyllingen Layered Intrusive Complex, Norway, and their Implications for Magma Chamber Evolution

The Hyllingen Series comprises the southern part of the Caledoniansynorogenic Fongen- Hyllingen layered mafic intrusion, whichoccupies an area of 160 km², southeast of Trondheim, Norway.Large, raft-like inclusions form an important part of the HyllingenScries. Most of these are of fine-grained, equigranular rocksof basaltic composition with lithologies matching those of theadjacent country rocks. The rafts, which compose up to 22% ofthe lower part of the Hyllingen Series, are broadly concordantwith modal layering in the host gabbroic rocks. Individual bodiescan be up to 1500 m long and over 100 m thick. Some of the raftsare branching, and appear locally to form a threedimensionalnetwork. Impact structures are associated with small metabasicinclusions but not with the large rafts. The Hyllingen magma chamber is believed to have developed asa southerly expanding, thin wedge, forming the upper part ofthe Fongen chamber. The magma was compositionally zoned andcrystallized along the inclined floor of the wedge-shaped chamber.The wedge expanded as a result of the influx of dense, primitivemagma in the northern part of the chamber. The highly evolvedmagma at the top of the chamber penetrated along fractures inthe roof and spread laterally to form sill-like bodies. Theroof zone consisted of a network of veins and sills penetratingan interconnected framework of metabasic hornfels. Continuedcrystallization at the floor, while the magma chamber expanded,finally resulted in the interconnected rafts being engulfedby the crystallization front. Fragments detached from the roofsank to the floor to cause the observed impact structures. Thelarge, raft-like, fine-grained, granular, gabbroic bodies areconsidered to be in situ country rock inclusions. Reprints available from J. R. Wilson     

AUTOMATIC EDITING OF NOISY SEISMIC DATA1

Seismic data often contain traces that are dominated by noise; these traces should be removed (edited) before multichannel filtering or stacking. Noise bursts and spikes should be edited before single channel filtering. Spikes can be edited using a running median filter with a threshold; noise bursts can be edited by comparing the amplitudes of each trace to those of traces that are nearby in offset-common midpoint space. Relative amplitude decay rates of traces are diagnostic of their signal-to-noise (S/N) ratios and can be used to define trace editing criteria. The relative amplitude decay rate is calculated by comparing the time-gated trace amplitudes to a control function that is the median trace amplitude as a function of time, offset, and common midpoint. The editing threshold is set using a data-adaptive procedure that analyses a histogram of the amplitude decay rates. A performance evaluation shows that the algorithm makes slightly fewer incorrect trace editing decisions than human editors. The procedure for threshold setting achieves a good balance between preserving the fold of the data and removing the noisiest traces. Tests using a synthetic seismic line show that the relative amplitude decay rates are diagnostic of the traces’S/N ratios. However, the S/N ratios cannot be accurately usefully estimated at the start of processing, where noisy-trace editing is most needed; this is the fundamental limit to the accuracy of noisy trace editing. When trace equalization is omitted from the processing flow (as in amplitude-versus-offset analysis), precise noisy-trace editing is critical. The S/N ratio of the stack is more sensitive to type 2 errors (failing to reject noisy traces) than it is to type 1 errors (rejecting good traces). However, as the fold of the data decreases, the S/N ratio of the stack becomes increasingly sensitive to type 1 errors.     

Contact aureoles as constraints on regional P-T trajectories: an example from the Northern Alabama Piedmont, USA

Abstract Contact aureoles of plutons emplaced into regionally metamorphosed terranes can provide indicators of physical conditions along a portion of regional metamorphic P-T trajectories, thereby allowing reconstruction of more complete P-T loops than would be otherwise possible. In the Northern Alabama Piedmont of the southern Appalachians, Wedowee Group metapelites preserve evidence for two regional metamorphic phases overprinted by contact metamorphism adjacent to the Blakes Ferry Trondhjemite. Textural evidence indicates that an early bt+st+grt assemblage was replaced by bt+chl+grt during the latter stages of regional metamorphism. Changes in AKFM topology, complex Fe-Mg-Ca garnet zoning, and the latestage appearance of epidote indicate that a sequence of continuous reactions (bt+st = grt+ ms followed by chl+ms+Ca-grt+Ca-pl=bt+ (Fe+Mg)-grt+ep) occurred in response to increasing pressure and resulted in the observed changes in mineral assemblage. Pl-ms-bt-grt thermobarometry indicates conditions of 580° 65°C, 8.5±0.8 kbar for equilibration of grt+ bt+chl. Pluton emplacement, subsequent to penetrative deformation, caused textural annealing and mineral re-equilibration by the continuous reaction bt+(Fe+Mg)-grt+ep = chl+ms+Ca-grt+Ca-pl within 50 m of the pluton. Conditions of 510±65°C, 5-7 kbar are inferred. A reconstructed P-T trajectory for this area is characterized by (1) early moderate- T , moderate- P metamorphism; (2) an increase in P to approximately 8.5 kbar; and (3) decompression and slight cooling prior to pluton emplacement. The compressional phase of this path is interpreted to result from underthrusting of the Wedowee metasediments to mid-crustal levels during Palaeozoic crustal thickening. Late-stage decompression prior to intrusion records uplift of these rocks in response to movement on structurally lower thrusts.     

Contained (reflected) turbidity currents from the Middle Ordovician Cloridorme Formation, Quebec, Canada: an alternative to the antidune hypothesis

The parautochthonous Cloridorme Formation is a syn-orogenic flysch succession that was deposited in an elongate foredeep basin as mainly lower middle-fan, outer-fan, and basin-floor deposits. The basin-floor deposits (about 1.5 km thick) are confined to members β1, β2 and γ1, and are characterized by graded, thick (1–10 m) mud-rich calcareous greywacke beds previously interpreted as deposits of concentrated, muddy, unidirectional turbidity currents that locally generated backset (antidune) lamination in internally stratified flows. The dominant flow directions were from east to west, but west to east transport also occurred, as seen in the orientation of ripples, climbing ripples, flutes, consistently overturned flames, and grain imbrication. We believe that the flows that deposited these thick calcareous greywacke beds reversed by roughly 180° one or more times during deposition of the lower sandy part of the beds. Flow reversals are consistent with the sharp grain-size breaks and mud partings within sandy divisions. Measurement of grain fabric relative to stratification in the most celebrated ‘antidune’ bedforms indicates flow from west to east; thus, the bedforms were produced by west-to-east migration of megaripples, not by the upcurrent migration of antidunes. The thick muddy beds were deposited by large-volume, muddy flows that were deflected and reflected from the side slopes and internal topographic highs of a confined basin floor, much like the ‘Contessa’ and similar beds of the Italian Apennines. Large quantities of suspended mud were ponded above the irregular basin floor and settled to produce the thick silty mudstone caps seen on each bed. Because of their mode of emplacement, we propose that these beds be called contained turbidites.     

火山灰的提取及测试技术

同一次火山爆发产生的火山灰 ,能在广阔的区域内形成等时标志层 ,成为地层定年和对比的极有价值的工具。文中介绍了提取肉眼不可见火山灰的 4种方法 :烧失法、稀碱法、重液浮选法和酸化法 ,还介绍了火山玻璃的显微镜下识别技术及电子探针测试技术。     

Testing the case for a Middle Pleistocene Scandinavian glaciation in Eastern England: evidence for a Scottish ice source for tills within the Corton Formation of East Anglia, UK

The provenance of the Happisburgh Till and Corton Till of the Corton Formation is investigated using erratic clast lithologies and allochthonous palynomorphs to test whether the long held assumption that they were deposited by ice that originated in Scandinavia is valid. The results show a wide range of lithologies including Carboniferous Limestone and Coal Measures, and Permian Magnesian Limestone that are not found in Scandinavia, and an absence of distinctive Scandinavian material such as rhomb porphyry and larvikite. Lithologies found indicate deposition by an ice sheet which flowed southwards into north-east East Anglia from central and southern Scotland eroding and transporting materials derived from outcrops in these areas and from eastern England and the western margins of the southern North Sea Basin. It is concluded that the long held assumption that the Happisburgh Till and Corton Till of the Corton Formation were deposited by a Scandinavian ice sheet is erroneous and that they were instead deposited by Scottish ice.     

TOWARDS A HYDROLOGICAL MODEL FOR COMPUTERIZED ICE-SHEET SIMULATIONS

Ice-sheet modelling typically uses grid cells 10 km or more on a side, so any hydrological and sliding model must average or parameterize processes that vary over shorter distances than this. Observations and theory suggest that basally produced water remains in a distributed, high-pressure system unless it encounters low-pressure channels fed by surface melt. Such distributed systems appear to exhibit increasing water storage, water transmission and water lubrication of sliding with increasing water pressure. A model based on these assumptions successfully simulates some aspects of the non-steady response of mountain glaciers to externally forced channel-pressure variations; it merits testing in ice-sheet modelling.     

Quaternary glaciations of the Rongbuk Valley,Tibet

Randomisation tests on boulder weathering data distinguish moraines of four different ages in the Rongbuk Valley, all deposited by valley glaciers flowing northward into Tibet from the Himalaya. Lichenometry utilising subgenus Rhizocarpon distinguishes two groups of moraines, those <100 yr old and those older than several thousand years. The degree of soil development has a similar, limited utility in relative-age dating these moraines. The radiocarbon ages of calcium carbonate coatings in the lower horizons of moraine soils provide minimum-limiting ages of 1900 yr BP for the penultimate advance of the Rongbuk glacier (Samdopo moraine) and 9500 yr BP for the Rongbuk moraine, the moraine suggested by previous workers to represent the last glacial maximum. Equilibrium-line depression associated with the Rongbuk moraine probably was slight, <200 m. The small magnitude of this depression relative to glaciers in other mountain ranges could relate to a weakening of the monsoon in full glacial times, recent tectonic uplift, and/or to the insensitivity of these high-altitude glaciers to lowering temperatures in the rain shadow of Mount Everest.     

酸化过程对不同碳酸钙含量的海洋沉积物中总氮及其同位素分析的影响

为节约成本和样品,一些学者同时分析海洋沉积物中的碳、氮及其同位素（TOC、TN、δ¹³C和δ¹⁵N）。分析沉积物中的δ¹³C,需要对样品进行酸化去除无机碳,但是这一酸化过程会使TN和δ¹⁵N的分析结果产生偏差,且偏差范围与沉积物中无机碳含量（CaCO₃）有关。本研究选取了低CaCO₃含量（1-16%）和高CaCO₃含量（20-40%）的海洋沉积物样品,比较了酸化过程对TN和δ¹⁵N的影响。研究结果表明,酸化过程对海洋沉积物中TN和δ¹⁵N的分析结果产生了显著影响。对于低CaCO₃含量的样品,酸化导致样品中TN流失了约0-40%,δ¹⁵N偏移了约0-2‰;而对于高CaCO₃含量的样品,酸化导致样品中TN流失了约10-60%,δ¹⁵N偏移了约1-14‰。表明酸化对TN和δ¹⁵N的影响已经超过了仪器的误差范围0.002%（TN）和0.08‰（δ¹⁵N）,将影响TN和δ¹⁵N的环境指示意义。因此,即使海洋沉积物样品中CaCO₃含量很低,也必须用原样分析TN和δ¹⁵N以避免酸化过程的影响。