A novel high-resolution small ion spectrometer to study ion nucleation of aerosols in ambient indoor and outdoor air

An electrically based ion spectrometer is described, capable of measuring particle sizes and mobilities from molecular ions (small ions) to aerosol particles across a size range of 0.4 to 30 nm in diameter. It consists of a single cylindrical capacitor divided into three electrically insulated sections. The current arriving at the central section is measured by an electrometer and represents the ion flux over a known range of mobilities determined by the applied voltage. The applied voltage is scanned in steps to measure the ion fluxes over a large number of overlapping mobility ranges. The recorded signal and the response function of the instrument are unfolded using a maximum entropy procedure to give a high-resolution measured mobility spectrum. The maximum entropy approach offers a considerable improvement over traditional aspiration collectors and can approach the resolution of a drift tube system. In this way, the spectrometer successfully overcomes the diffusion limit to small ion resolution. Illustrative spectra are shown, demonstrating for the first time the presence of some resolved structure within the small ion spectrum at the highest mobilities. It is demonstrated that the actual mobility spectrum of small ions falls in the range 0.8–2.0 × 10⁻⁴ m² V⁻¹ s⁻¹. This represents a narrower range than that previously measured which is attributed to improved spectral resolution in the present work.     

Knowledge gaps in our perceptual model of Great Britain's hydrology

There is a no lack of significant open questions in the field of hydrology. How will hydrological connectivity between freshwater bodies be altered by future human alterations to the hydrological cycle? Where does water go when it rains? Or what is the future space–time variability of flood and drought events? However, the answers to these questions will vary with location due to the specific and often poorly understood local boundary conditions and system properties that control the functional behaviour of a catchment or any other hydrologic control volume. We suggest that an open, shared and evolving perceptual model of a region's hydrology is critical to tailor our science questions, as it would be for any other study domain from the plot to the continental scale. In this opinion piece, we begin to discuss the elements of and point out some knowledge gaps in the perceptual model of the terrestrial water cycle of Great Britain. We discuss six major knowledge gaps and propose four key ways to reduce them. While the specific knowledge gaps in our perceptual model do not necessarily transfer to other places, we believe that the development of such perceptual models should be at the core of the debate for all hydrologic communities, and we encourage others to have a similar debate for their hydrologic domain.     

Modeling of Fluvial Reservoirs with Object Models

An object model for fluvial reservoirs that has been developed from 1985 to present is described. It uses a formal mathematical object model (marked point process) describing the distributions of four facies: channel, crevasse, barrier, and background. Realisations from the model are generated using the Metropolis-Hastings simulation algorithm with simulated annealing conditioning on the volume ratios and well observations. The main challenge has been to find a suitable parameterization of the geology of fluvial reservoirs, and to find and implement the generating function of the channels in the simulation algorithm. The model and simulation algorithm can be conditioned on arbitrary well paths including horizontal wells and paths with partly missing observations, well test data, well contacts, seismic data, and general geological knowledge.     

Sulfur geochemistry of hydrothermal waters in Yellowstone National Park,Wyoming, USA. III. An anion-exchange resin technique for sampling and preservation of sulfoxyanions in natural waters

A sampling protocol for the retention, extraction, and analysis of sulfoxyanions in hydrothermal waters has been developed in the laboratory and tested at Yellowstone National Park and Green Lake, NY. Initial laboratory testing of the anion-exchange resin Bio-Rad™ AG1-X8 indicated that the resin was well suited for the sampling, preservation, and extraction of sulfate and thiosulfate. Synthetic solutions containing sulfate and thiosulfate were passed through AG1-X8 resin columns and eluted with 1 and 3 M KCl, respectively. Recovery ranged from 89 to 100%. Comparison of results for water samples collected from five pools in Yellowstone National Park between on-site IC analysis (U.S. Geological Survey mobile lab) and IC analysis of resin-stored sample at SUNY-Stony Brook indicates 96 to 100% agreement for three pools (Cinder, Cistern, and an unnamed pool near Cistern) and 76 and 63% agreement for two pools (Sulfur Dust and Frying Pan). Attempts to extract polythionates from the AG1-X8 resin were made using HCl solutions, but were unsuccessful. Bio-Rad™ AG2-X8, an anion-exchange resin with weaker binding sites than the AG1-X8 resin, is better suited for polythionate extraction. Sulfate and thiosulfate extraction with this resin has been accomplished with KCl solutions of 0.1 and 0.5 M, respectively. Trithionate and tetrathionate can be extracted with 4 M KCl. Higher polythionates can be extracted with 9 M hydrochloric acid. Polythionate concentrations can then be determined directly using ion chromatographic methods, and laboratory results indicate recovery of up to 90% for synthetic polythionate solutions using AG2-X8 resin columns.     

Abiotic ammonium formation in the presence of Ni-Fe metals and alloys and its implications for the Hadean nitrogen cycle

Experiments with dinitrogen-, nitrite-, nitrate-containing solutions were conducted without headspace in Ti reactors (200°C), borosilicate septum bottles (70°C) and HDPE tubes (22°C) in the presence of Fe and Ni metal, awaruite (Ni₈₀Fe₂₀) and tetrataenite (Ni₅₀Fe₅₀). In general, metals used in this investigation were more reactive than alloys toward all investigated nitrogen species. Nitrite and nitrate were converted to ammonium more rapidly than dinitrogen, and the reduction process had a strong temperature dependence. We concluded from our experimental observations that Hadean submarine hydrothermal systems could have supplied significant quantities of ammonium for reactions that are generally associated with prebiotic synthesis, especially in localized environments. Several natural meteorites (octahedrites) were found to contain up to 22 ppm N_tot. While the oxidation state of N in the octahedrites was not determined, XPS analysis of metals and alloys used in the study shows that N is likely present as nitride (N^3-). This observation may have implications toward the Hadean environment, since, terrestrial (e.g., oceanic) ammonium production may have been supplemented by reduced nitrogen delivered by metal-rich meteorites. This notion is based on the fact that nitrogen dissolves into metallic melts.     

The effect of adsorbed lipid on pyrite oxidation under biotic conditions

The chemolithoautotrophic bacterium, Acidithiobacillus ferrooxidans, commonly occurs in acid mine drainage (AMD) environments where it is responsible for catalyzing the oxidation of pyrite and concomitant development of acidic conditions. This investigation reports on the growth of this bacterial species on the pyrite surface and in the aqueous phase at a pH close to 2 as well as the role of adsorbed lipid in preventing pyrite dissolution. Both acid washed pyrite and acid-washed pyrite coated with lipids were used as substrates in the studies. The choice of lipid, 1,2-bis(10,12-tricosadiynoyl)-sn-Glycero-3-Phosphocholine lipid (23:2 Diyne PC), a phosphocholine lipid, was based on earlier work that showed that this lipid inhibits the abiotic oxidation rate of pyrite. Atomic force microscopy showed that under the experimental conditions used in this study, the lipid formed ~4–20 nm layers on the mineral surface. Surface-bound lipid greatly suppresses the oxidation process catalyzed by A. ferrooxidans. This suppression continued for the duration of the experiments (25 days maximum). Analysis of the bacterial population on the pyrite surface and in solution over the course of the experiments suggested that the pyrite oxidation was dependent in large part on the fraction of bacteria bound to the pyrite surface.