Assessment of Nitrate—Nitrogen Distribution in Kansas Groundwater, 1990–1998

Nitrate-nitrogen (nitrate-N) in groundwater is a potential problem in many parts of Kansas.From 1990 to 1998, 747 water samples were collected from domestic, irrigation, monitoring,and public water supply wells primarily from the western two-thirds of the state, and analyzedfor nitrate-N by the Kansas Geological Survey. Nitrate-N concentrations of the 747 samplesanalyzed range from 29% with less than or equal to 3 mg/L, 51% between 3 and 10 mg/L,and 20% greater than or equal to 10 mg/L. Factors that show a statistically significantrelationship with the occurrence of nitrate-N in Kansas groundwater in this assessment includegeographic area of the state, depth of well, and age of well. Nitrate-N levels of wells screenedin the High Plains aquifer in south-central Kansas showed a statistically higher concentrationthan samples collected from the High Plains aquifer in the western portion of the state.Comparison of nitrate-N with depth of well indicated that shallower wells throughout the stategenerally have higher nitrate-N values than deeper wells. Irrigation wells older than 1975showed statistically higher nitrate-N concentration than wells installed during and since 1975,possibly related to changes in well-construction practices and regulations that occurred in 1975.     

Distribution of nutrient salts in the southern North Sea during early 1974

Nutrient salt surveys in the southern North Sea have shown that the level of phosphate and nitrate off the continental coast during January, 1974 was two to three times higher than during the same period in 1962. The level of phosphate has also increased in the Thames Estuary but to a lesser degree. It is suggested that these increases are related to the discharge of waste material from terrestrial sources and that such changes must be considered in the context of eutrophication in the southern North Sea.     

Photocatalytic Activity of Combustion Synthesized Nanocrystalline CeAlO3

The photocatalytic activity of combustion synthesized nanocrystalline CeAlO₃ was determined for the degradation of four anionic and four cationic dyes. The perovskite oxide showed high‐photocatalytic activity and a complete degradation of all the dyes was possible within 2 h. The photocatalytic activity of the compound was comparable with the activity of the commercial Degussa P‐25 TiO₂ catalyst. The degradation of dyes was found to follow first order kinetics and the first order degradation rate constants were determined.     

A poincaré model for the earth's fluid core

Abstract

The superconducting-gravimeter data of Melchior and Ducarme (1986) has been interpreted as internal motion in the Earth's core by Aldridge and Lumb (1987) using a Poincaré model. Several low-order modes with periods of 13–16 hours have been tentatively identified in the core which is taken to be an incompressible, homogeneous fluid within a rigid, rotating container. The identification is based on asymptotic values of the frequencies which change slowly with time while the modes decay with an e-folding time of about 280 days. The slow change in frequency with time implies a small temporal variation in the rotation rate of the core. This mean flow is a nonlinear effect often observed in laboratory experiments designed to excite Poincaré modes. Interaction among modes during free ringdown is also observed in those experiments and apparently in the data of Melchior et al. (1988) as well. Laboratory work thus provides the link to extend the Poincaré model to include viscous and nonlinear effects in order to interpret the gravimetric observations as core modes.     

Petrological influence on differential weathering and inselberg development in the Kora area of central Kenya

In the Kora area of central Kenya domed inselbergs are well developed on outcrops of granitoid migmatite, while positive relief features are rare on the surrounding gneiss. Block-strewn, vegetated hills occur on restricted areas of granoblastite, gabbro, and metagabbro. Schmidt Hammer measurements have shown that the apparent differences in resistance to weathering and erosion are not due to variations in rock hardness, since all the rock types have similar ‘R’ values. The results of geochemical analyses have shown that the migmatites are significantly more potassic than the surrounding gneiss. Samples of migmatite from the inselbergs were also found to be slightly richer in potassium than migmatite samples from the inter-inselberg areas. The variations in potassium content probably reflect differences in protolith composition, chemical fractionation during partial melting, and the effects of metasomatism. These findings support earlier suggestions that, other things being equal, potassium-rich granitoid rocks weather more slowly than less potassic rocks.     

A model for the emplacement of the eastern compartment of the bushveld complex

The stratigraphy and geological position of the eastern compartment of the Bushveld Complex are described. A mechanical model for the initiation and growth of the eastern compartment of the Bushveld intrusion has been developed using thin elastic plate theory, assuming linked conical magma chambers. It is shown that the contribution to the pressure at the base of a cell by the restitutional force exerted by the roof of Rooiberg felsites is 10⁴ times as great as that of the layers of host in the cone. Both are minimal compared to the lithostatic pressure exerted by the magma pile. Roof deformation is therefore seen to be a more important process than sagging of the floor during intrusion—a feature which probably occurred during cooling, solidification and isostatic readjustment of the area.A stratigraphie model is proposed in which the intrusion of basic rocks into the Transvaal sequence is discussed in the light of continuous basin subsidence. Early submarine sedimentation in an irregularly-floored basin some 620 km in diameter situated on the Archaean craton gave rise to a 7.7 km thick sedimentary pile, to which was added some 7 km of subaerial basalts and felsites. Depression of the floor of the basin into the regime of maximum horizontal compression induced favourable conditions for the intrusion of a total of 2.5 km of diabase sills which further assisted the subsidence. The 9 km thick Bushveld Complex was intruded into the basal sections at points along a 010° trend in a regime characterised by shear failure. Early magma influxes gave rise to a laminated marginal zone forming a shallow cone, with associated sill activity, whilst continued later influxes filled the conical cell, transgressed the floor and uparched the roof. Partial melting in the regions beneath the Complex, exacerbated by continued crustal depression, gave rise to the late Bushveld granites.     

Excitation mechanism of atmospheric pressure waves from the 1980 Mount St Helens eruption

Summary. Atmospheric pressure waves from the Mount St Helens eruption 1980 May 18 have been clearly recorded by a sensitive microbarograph at Berkeley, California. The record shows three types of waves with different group velocities. The pressure waves can be interpreted in terms of direct waves A1, antipodean travelling waves A2 and circumnavigating waves A3, all of which are composed of several acoustic-gravity modes propagated in the lower atmosphere. Synthetic barograms appropriate to the Berkeley station have been calculated on the basis of the dynamic response of the lower atmospheric structure, together with various assumptions of source properties. Comparisons between synthetic and observed barograms provide estimates for ranges of the time history of upward particle velocity at the source, source dimensions and the velocity of the source spreading over the blast zone, as well as for the average dissipation effects over the circumferential path. The results suggest that two major compression pulses on the A1 record correlate with the arrival of pressure waves from the first (lateral) blast and second (vertical) blast, although the inferred interblast time interval is not consistent with that estimated from seismic observations.     

A procedure for identifying significant environmental aspects in sea ports

A new methodology has been designed to identify and rank the significant environmental aspects in sea ports. The main objective of the Strategic Overview of Significant Environmental Aspects (SOSEA) is to help port managers to identify significant environmental aspects and to reinforce the awareness about them in order to prioritise work in environmental management. Developed in close collaboration with port environmental managers and tested in a set of ports, it is a user-friendly tool that can be applied in approximately half a working day. It is based on ISO 14001 vocabulary and requirements and it can be considered as the base for the implementation of any Environmental Management System for port communities.     

Geomorphic response to an active transpressive regime: a case study along the Chaman strike‐slip fault,western Pakistan

The Chaman left‐lateral strike‐slip fault bounds the rigid Indian plate boundary at the western end of the Himalayan‐Tibetan orogen and is marked by contrasting topographic relief. Deformed landforms along the fault provide an excellent record for understanding this actively evolving intra‐continental strike‐slip fault. The geomorphic response of an active transpessional stretch of the Chaman fault was studied using digital elevation model (DEM) data integrated with Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Visible and Near Infrared/Short Wave Infrared (VNIR/SWIR) and images from GeoEye‐1. Geologic and geomorphic mapping helped in reconstructing the Late Quaternary landscape history of this transpessional strand of the Chaman strike‐slip fault and the associated Spinatizha thrust fault in western Pakistan. Topographic analysis of a part of the transpression (the thrust bounded Roghani ridge) revealed northward growth of the Spinatizha fault with the presence of three water gaps and two corresponding wind gaps. Geomorphic indices including stream length‐gradient index, mountain front sinuosity, valley floor width to valley height ratios, and entrenchment of recent alluvial fan deposits were used to define the lateral growth and direction of propagation of the Spinatizha fault. Left‐lateral displacement along Chaman fault and uplift along the Spinatizha fault was defined using topographic analysis of the Roghani ridge and geomorphic mapping of an impressive alluvial fan, the Bostankaul fan. The landforms and structures record slip partitioning along the Indian plate boundary, and account for the convergence resulting from the difference in the Chaman fault azimuth and orientation of the velocity vector of the Indian plate. Copyright © 2012 John Wiley & Sons, Ltd.