Electron paramagnetic resonance,optical absorption,and magnetic circular dichroism studies of the CO 3 − molecular-ion in irradiated natural beryl

Room temperature X-irradiation of some natural beryls produced several new absorption lines in the electron paramagnetic resonance (EPR) spectrum, a known series of optical absorption lines in the 500–700 nm range, and a shift of the absorption edge to lower energies. Several of the new EPR lines and part of the irradiation-induced shift of the absorption edge disappeared after a few days at room temperature, and were not examined in detail. However, three of the paramagnetic centres responsible for the new EPR lines were stable at room temperature and two of these have previously been identified as atomic hydrogen and the methyl radical, CH₃. These species were stable to ～150 and ～450°C respectively. The third stable species, hitherto unreported, showed a single-line EPR spectrum of axial symmetry, with g∥=2.0051 and g⊥=2.0152. This spectrum was found to be intensity-correlated with the series of optical bands in the 500–700 nm range, after thermal bleaching at 175°C. The EPR and optical spectra are therefore assigned to the same species. It is argued that this species is the CO ₃ ^? molecular ion, located in the widest part of the structural channel and aligned with the plane of the molecule perpendicular to the c axis. The EPR spectrum is consistent with a ² A′₂ ground state of a CO ₃ ^? molecule with trigonal symmetry, and this requires that the optical transition has a ² A′₂ → ² E′ character. Most of the features in the optical spectrum can be assigned to coupling of a totally symmetric mode of frequency ～1020 cm^?1 onto a zero-phonon line at 14,490 cm^?1 and a second weaker line at 16,020 cm^?1. However, both of these two fundamental lines are structured, and the two components show strong temperature-dependent derivative-shaped magnetic circular dichroism (MCD). Furthermore, the overall sign of the MCD for the line at 16,020 cm^?1 is opposite to that at 14,490 cm^?1. The separation (～120 cm^?1) of the two components of the 14,490 cm^?1 line is much larger than that expected from spin-orbit interaction, and the origin of this splitting is not yet understood.     

Resonant Periodic Orbits of Trans-Neptunian Objects

We study two and three-dimensional resonant periodic orbits, usingthe model of the restricted three-body problem with the Sun andNeptune as primaries. The position and the stability character ofthe periodic orbits determine the structure of the phase space andthis will provide useful information on the stability and longterm evolution of trans-Neptunian objects. The circular planarmodel is used as the starting point. Families of periodic orbitsare computed at the exterior resonances 1/2, 2/3 and 3/4 withNeptune and these are used as a guide to select the energy levelsfor the computation of the Poincaré maps, so that all basicresonances are included in the study. Using the circular planarmodel as the basic model, we extend our study to more realisticmodels by considering an elliptic orbit of Neptune and introducingthe inclination of the orbit. Families of symmetric periodicorbits of the planar elliptic restricted three-body problem andthe three-dimensional problem are found. All these orbitsbifurcate from the families of periodic orbits of the planarcircular problem. The stability of all orbits is studied. Althoughthe resonant structure in the circular problem is similar for allresonances, the situation changes if the eccentricity of Neptuneor the inclination of the orbit is taken into account. All theseresults are combined to explain why in some resonances there aremany bodies and other resonances are empty.     

The relation of Holocene fluvial terraces to changes in climate and sediment supply,South Fork Payette River,Idaho

Well-preserved Holocene terraces along the South Fork Payette River in central Idaho provide a record of fluvial system behavior in a steep mountain watershed characterized by weathered and erodible Idaho Batholith granitic rocks. Terrace deposit ages were provided by ¹⁴C dating of charcoal fragments and optically stimulated luminescence (OSL) dating of sandy sediments. Along with pairing of many terrace tread heights, these data indicate episodic downcutting during the Holocene, with a mean incision rate of ～0.9 m/ka from ～7 ka to present. Prior to 7 ka, the river incised to within～3 m of current bankfull, but then aggraded by ～5 m over at least a ～10 km-long reach in an episode centered ～7–6 ka. Aggradation may relate to (1) increased hillslope sediment input from landslides and debris flows in steep tributary basins with abundant grussified granitic bedrock, (2) possible local landslide-damming of the channel, (3) decreased peak discharge, or (4) a combination of these factors. Middle Holocene channel aggradation ca. 7–6 ka corresponds with a period of prolonged and widespread aridity in the northern Rocky Mountains. Between ～5 and 1.3 ka, the river aggraded slightly and then remained stable, forming a prominent terrace tread at ～3 m above current bankfull. Modest aggradation to vertical stability of the South Fork Payette River at the 1.5 m terrace level ～1.0–0.7 ka corresponds with large fire-related debris flows in tributaries during Medieval droughts. Three intervals of incision (～5.5–5 ka, 1.3–1.0 ka and 0.5 ka) correspond with frequent but small fire-related sedimentation events and generally cooler, wetter conditions suggesting increased snowmelt runoff discharges. Other possible drivers of channel incision include an increase in stochastic or climate-modulated large storms and floods and a reduction in delivery of hillslope sediment to the channel. Aggradation is more confidently tied to climate through increases in hillslope sediment delivery and (or) decreased stream power, both likely related to warmer, drier conditions (including high-severity fires) that reduce snowmelt and decrease vegetation cover on steep slopes. Thus, the Holocene terraces of the South Fork Payette River do not reflect simple stepwise incision with periods of vertical stability and lateral migration, but record substantial episodes of aggradation as well. We infer that increases in hillslope erosion and mass movements combined with reduced discharges during prolonged droughts episodically reverse the post-glacial trend of downcutting, in particular during the middle Holocene. The present bedrock-dominated channel implies a strong tendency toward incision in the late Holocene.     

Arcanite from Fumarole Exhalations of the Tolbachik Volcano (Kamchatka,Russia) and Its Crystal Structure

The crystal structure (R = 0.0194) of arcanite β-K₂SO₄ was studied on a single crystal from exhalations of the Arsenatnaya fumarole, Tolbachik Volcano (Kamchatka, Russia). The mineral crystallizes at a temperature of ≥350–430°C and associates with langbeinite, aphthitalite, hematite, tenorite, johillerite, and others. Arcanite is orthorhombic, Pnma, a = 7.4763(2) Å, b = 5.77262(16) Å, c = 10.0630(3) Å, V = 434.30(2) ų, Z = 4. Its structure contains isolated SO₄ tetrahedra, whereas K cations center ten- and nine-fold polyhedra.     

The problem of the sighting line stabilization for axial meridian circles

The paper deals with the method based on treating the axial meridian circle and a long-focus light mark in the prime vertical as a single virtual instrument that has properties of meridian circle. A horizontal axis, a sighting line, and a micrometer cross-wire of the instrument are created by optical means. The key function here is performed by the light mark that ensures a reference direction used for formation of instrumental principal planes and directions. Stability of instrumental azimuth, inclination, and collimation is expected to be about ±0.″01. Besides, an accuracy of observations is not affected by any temperature and weight deformations of telescope mechanics. Owing to the last circumstance, the design is cheap and the telescope aperture may be increased significantly, to about 1m. An estimate of accuracy of observations depends on the adopted model of image motion, and for sites with excellent seeing and bright stars is ±0.″03 to ±0.″05 (rms).     

Lithogeochemistry of hypogene, supergene and leached cap samples, berg porphyry copper deposit, British Columbia

In this paper we examine the influence of the development of supergene oxide and sulphide zones on the original hypogene geochemical patterns at the Berg deposit, British Columbia.The deposit, in the alpine zone of the Tahtsa Range, was logged (GEOLOG) and sampled in fourteen diamond drill holes along a N—S section and from outcrop where possible. Anomalous populations of major and trace elements were defined using log probability graphs and a sequential extraction (10% hydrochloric acid— ammonium oxalate — potassium chlorate/hydrochloric acid — nitric/perchloric acids) was used to study the distribution of elements between carbonate, oxide, sulphide and silicate phases.Core logs and assays show that primary ore minerals (chalcopyrite—molybdenite) extend from the outer part of the porphyry intrusion into the surrounding hornfels where the best grades of copper are found close to the intrusive contact. Maximum copper grades, however, result from development of a supergene enrichment blanket. Within the hypogene zone, principal lithogeochemical patterns reflect the differences in composition of the hornfels, originally intermediate to basic volcanics, and the intrusion, as well as the introduction of F and trace metals (Cu, Mo, Pb, Zn and Ag). Distribution of Ag is broadly comparable to that of Cu and Mo whereas anomalous Pb and Zn are present as peripheral haloes around the potential ore zones.Emergence of strongly acidic ground water and precipitation of iron oxides, indicate that leaching processes are active. Furthermore, although primary sulphides, associated with both their oxidation products and secondary sulphides, can still be found in surface samples, sequential extractions on drill core clearly indicate vertical redistribution of copper between oxide, carbonate and sulphide phases. Using ratios of metal concentrations to TiO₂, the surface concentrations of trace metals can be compared with those at depth and the relative amount of enrichment or depletion can be quantified. In highly leached sites the absolute concentrations of Cu, Mn and Zn are low which is reflected in TiO₂ ratios of <1. However, Mo, Pb and Ag are enriched at the same sites (TiO₂ ratios >1). In areas where physical erosion exceeds leaching (topographic lows) primary sulphides co-exist with secondary sulphide and oxide minerals. Here Cu, Mo, Pb, Zn, Mn and Ag are enriched. Fluorine is relatively unaffected by the leaching process. It would appear signature for a cale alkaline Cu and Mo porphyry deposit in an area where outcrop was intensely leached.     

A near‐annual palaeohydrological study based on testate amoebae from a sub‐alpine mire: surface wetness and the role of climate during the instrumental period

We present the first testate amoeba‐based palaeohydrological reconstruction from the Swiss Alps, and the first depth to the water table (DWT) calibration dataset for this region. Compared to existing models, our new calibration dataset performs well (RMSEP = 4.88), despite the length of the water table gradient covered (53 cm). The present‐day topography and vegetation of the study mire Mauntschas suggest that it is partly ombrotrophic (large Sphagnum fuscum hummocks, one of which was the coring site) but mostly under the minerotrophic influence of springs in the mire and runoff from the surrounding area. Ombrotrophic Sphagnum fuscum hummocks developed at the sampling site only during the last 50 years, when testate amoebae indicate a shift towards dry and/or acid conditions. Prior to AD 1950 the water table was much higher, suggesting that the influence of the mineral‐rich water prevented the development of ombrotrophic hummocks. The reconstructed DWT correlated with Pinus cembra pollen accumulation rates, suggesting that testate amoebae living on the mire and P. cembra growing outside of it partly respond to the same factor(s). Finally, temperature trends from the nearby meteorological station paralleled trends in reconstructed DWT. However, contrary to other studies made on raised bogs of northwestern Europe, the highest correlation was observed for winter temperature, despite the fact that testate amoebae would more logically respond to moisture conditions during the growing season. The observed correlation with winter temperature might reflect a control of winter severity on surface moisture during at least the first part of the growing season, through snow melt and soil frost phenomena influencing run‐off. More ecohydrological work on sub‐alpine mires is needed to understand the relationships between climate, testate amoebae and peatland development. Copyright © 2009 John Wiley & Sons, Ltd.     

Petrogenesis of ultramafic and mafic rocks of the Thompson Nickel Belt,Manitoba

Abundant sill-like bodies of serpentinized ultramafic rocks, with associated nickel sulfide deposits, are found on the western side of the Thompson Nickel Belt near the Moak Lake-Setting Lake cataclastic fault zone. The ultramafic rocks range in composition from dunite to orthopyroxenite and feature variable alteration. Chemical variation across the bodies is suggestive of in-situ differentiation controlled mainly by olivine and orthopyroxene. Relative abundances of some elements, incompatible for olivine and orthopyroxene, suggest a parental liquid of komatiitic affinity. Ultramafic and mafic rocks are petrogenetically linked. A high degree of partial melting of mantle material and subsequent low-pressure crystal fractionation are responsible for the spectrum of composition from ultramafic to mafic.Publication 19-84, Ottawa-Carleton Centre for Geoscience Studies     

Helical structures around quiescent solar prominences computed from observable magnetic fields

We analyse the magnetic support of solar prominences in two-dimensional linear force-free fields. A line current is added to model a helical configuration, well suited to trap dense plasma in its bottom part. The prominence is modeled as a vertical mass-loaded current sheet in equilibrium between gravity and magnetic forces.We use a finite difference numerical technique which incorporates both vertical photospheric and horizontal prominence magnetic field measurements. The solution of this mixed boundary problem generally presents singularities at both the bottom and top of the model prominence. The removal of the singularities is achieved by superposition of solutions. Together with the line current equilibrium, these three conditions determine the amplitude of the magnetic field in the prominence, the flux below the prominence and the current intensity, for a given height of the line current. A numerical check of accuracy in the removal of singularities, is done by using known analytical solutions in the potential limit.We have investigated both bipolar and quadrupolar photospheric regions. In this mixed boundary problem the polarity of the field component orthogonal to the prominence is mainly fixed by the imposed height of the line current. For bipolar regions above (respectively below) a critical height the configuration is inverse (respectively normal). For quadrupolar regions the polarity is reversed if we refer the prominence polarity to the closest photospheric polarities. We introduce the polarity of the component parallel to the prominence axis with reference to a sheared arcade. Increasing the shear with fixed boundary conditions can increase or decrease the mass supported depending on the configuration.