Geochemistry of redeposited and undisturbed ancient weathering zones in the Baikal Region

The distribution of major and trace elements was explored in the metamorphised weathering zones of the northern (Purpol Formation) and western (Anai and Angin formations) Baikal region. The alumina-rich schists of the Purpol and Anai formations intercalated with quartzites have a model age of 2.8–3.0 Ga and are redeposited products of the weathering of granitized basement inliers of the Siberian craton. Their trace element characteristics with high contents of Th, U, Nb, and REE and low Ta and Sr reflect the composition of predominant rocks in the Archean basement. Undisturbed weathering zones over the alkaline and calc-alkaline island-arc basalts of the Angin Formation are, in general, similar to modern laterites and redeposited residues with respect to the enrichment in hydrolyzate elements but are assigned to iron-rich laterites and distinguished by high contents of Fe, Ti, Nb, Ta, Zr, and Hf, which were inherited from their parent rocks. Their occurrence suggests subaerial eruptions of alkali basalts in the proximal part of the Angin-Talanchan island arc.     

Cenozoic tectonic events at the border of the Paraná Basin, São Paulo, Brazil

In the last decade, even in areas that had been considered tectonically stable, a great amount of Cenozoic, including the Quaternary period, structural data have been collected throughout Brazil. The main goal of this study is to describe the Cenozoic structures and tectonic evolution of an area that is located at the border of the Paraná Basin in the state of São Paulo.The research methods consisted of the analysis of: (1) brittle structure data, mainly conjugate fractures and fault slip data; (2) lineaments traced on air photos and TM Landsat and radar images; and (3) a second-order base surface map.The study area, during the Cenozoic, has been affected by five strike–slip tectonic events, which generated mainly strike–slip faults, and secondarily normal and reverse ones. The events were named, from the oldest to the youngest, E1-NE, E2-EW, E3-NW, E4-NS, and E5-NNE; and the maximum principal stresses σ1 strike approximately NE–SW, E–W, NW–SE, N–S, and NNE–SSW, respectively. Event E2-EW seems to have been contemporaneous with the deposition of the Rio Claro Formation, the most important Cenozoic deposit of probable Neogenic age, and also to have controlled the distribution of its deposits. Event E3-NW was the strongest one in the area, as is pointed out by structural data, and the maximum principal stress σ1 of event E5-NNE is partially concordant with the orientation of σH-max of well break-out data in the Paraná Basin, suggesting a Neotectonic activity for this event. Finally, discontinuities parallel and correlated to the directions of strike–slip faults of the Cenozoic events seem to have actively controlled the sculpturing of the relief in the study area.     

Interaction of the Atmosphere and Lithosphere in the Minute Range of Periods

Doklady Earth Sciences - The interaction between the atmosphere and the lithosphere in the minute range of periods is considered. The technique of assessment of the influence of atmospheric...     

Olivine in ultramafic lamprophyres: chemistry,crystallisation, and melt sources of Siberian Pre- and post-trap aillikites

We studied olivines from the Devonian pre-trap (the Ilbokich occurrence) and the Triassic post-trap (the Chadobets occurrence) carbonate-rich ultramafic lamprophyres (UMLs) in the southwestern portion of the Siberian craton. On the basis of detailed investigations of major, minor, and trace-element distributions, we have reconstructed the main processes that control the origins of these olivines. These include fractional crystallisation from melt, assimilation, and fractional crystallisation processes with orthopyroxene assimilation, melt-reaction diffusive re-equilibration, alkali enrichment, and CO₂ degassing of the melt. Furthermore, we inferred the composition of the sources of the primary UML melt and their possible correlations with proto-kimberlitic melts, as well as the influence of the Triassic Siberian plume on the composition of the lithospheric mantle. The main differences between olivines from the Ilbokich and the Chadobets aillikites were that the olivines from the former had more magnesium-rich cores (Mg# = 89.2?±?0.2), had Mg- and Cr-rich transition zones (Mg# = 89.7?±?0.2 and 300–500 ppm Cr), had lower Ni (up to 3100 ppm) and Li (1.4–1.5 ppm), and had higher B (0.8–2.6 ppm) contents, all at higher Fo values (90–86), relative to the olivines from the latter (Mg# = 88–75; 200–300 ppm Cr; up to 3400 ppm Ni; 1.4–2.4 ppm Li; 0.4–2.2 ppm B). The Siberian aillikite sources contained a significant amount of metasomatic material. Phlogopite-rich MARID-type veins provided the likely metasomatic component in the pre-trap Devonian Ilbokich aillikite source, whereas the Triassic Chadobets aillikitic post-trap melts were derived from a source with a significant carbonate component. A comparison of UML olivines with olivines from the pre-trap and post-trap Siberian kimberlites shows a striking similarity. This suggests that the carbonate component in the aillikitic source could have been produced by evolved kimberlite melts. The differences in the lithospheric metasomatic component that contributed to pre-trap and post-trap aillikitic melts can be interpreted as reflections of the thermal impact of the Siberian Traps, which reduced phlogopite-bearing metasomes within the southwestern Siberian sub-continental lithospheric mantle.     

A New Approach to ID-TIMS U–Pb Dating of Cassiterite by the Example of the Pitkäranta Tin Deposit

Doklady Earth Sciences - A new technique for the complete dissolution of cassiterite, which makes it possible to determine the age of this mineral by U–Pb isotope dilution (ID-TIMS), has been...     

Prediction of Uplift Pile Displacement Based on Cone Penetration Tests (CPT)

Accurate prediction of uplift pile displacement is necessary to ensure appropriate structural and serviceability performance of civil projects. On the other hand, in recent years, machine-learning models have been applied to many geotechnical-engineering problems, with some degrees of success. The scope of this research includes three main stages: (1) the compilation of load–displacement data sets, obtained from the published literature, (2) analysis of machine learning models that predict the uplift pile displacement based on the cone penetration test data, and the relative importance of input parameters that have been evaluated using senility analysis by the artificial neural network, In addition, this paper also examines the different selection of input parameters and internal network parameters to obtain the optimum model, (3) A parametric study has also been performed for the input parameters to study the consistency of the suggested model. The statistical parameters and parametric study obtained in this research show the superiority of the current model. It is demonstrated that machine learning models such as ANN and GP models outperform the traditional methods, and provide accurate uplift pile displacement predictions.     

Measured and modeled wave overtopping on a natural beach

The rate of wave overtopping of a barrier beach is measured and modeled. Unique rate of wave overtopping field data are obtained from the measure of the Carmel River, California, lagoon filling during a time when the lagoon is closed-off with no river inflow. Volume changes are based on measured lagoon height changes applied to a measured hypsometric curve. Wave heights and periods are obtained from directional wave spectra data in 15 m fronting the beach. Beach morphology was measured by GPS walking surveys. Three empirical overtopping models by Van der Meer and Janssen (1995), Hedges and Reis (1998) and Pullen et al. (2007) with differing parameterizations on wave height, period and beach slope and calibrated using extensive laboratory data obtained over plane, impermeable beaches are applied in a quasi-2D manner and compared with the field observations. Three overtopping events are considered when morphology data were available less than 2 weeks prior to the event. The models are tuned to fit the data using a reduction factor to account for beach permeability, berm characteristics, non-normal wave incidence and surface roughness influence. In addition, the run-up model by Stockdon et al. (2006) based on field data is examined and found to underestimate run-up as the calculated values were too small to predict any of the observed overtopping. The three overtopping models performed similarly well with values of 0.72–0.87 for the two narrow-banded wave cases, with an average reduction factor of 0.78. The European model (Pullen et. al., 2007) performed best overall and in particular for the case of the broad-banded, double peaked wave spectrum.     

Quality Appraisal of Surface Waters on Fennoscandian Territory

Widely applied bioindication methods are analyzed based on the survey data of 1980–1996 for over 400 lakes and 300 watercourses in the northeastern Fennoscandia known to experience anthropogenic impact (toxification, acidification, eutrophication, and thermofication). Representative results of hydrobiological analysis of the quality of surface waters in areas with mixed toxic pollution (or anthropogenic acidification) may be obtained if methods are applied, different from the bioindication methods that are now accepted as standard for Russia, along with methods of biotesting natural waters. The saprotoxibity index, Kola biotic index, acidification estimation scale, biotesting methods were developed and adapted to regional conditions.     

Transport rate of calcareous sand in unidirectional flow

This paper examines the transport of calcareous sand in unidirectional flow and its prediction through existing sediment transport models. A flume experiment of four sand samples collected on Oahu, Hawaii, provides 29 sets of sediment transport data in the bed-form and suspended transport stages. The measured transport data are compared with direct predictions from four energy-based transport models developed for siliceous particles. Corrections for the grain-size, fall velocity, and critical velocity of calcareous sand based on recent research are applied to the models and the results are compared with the direct calculations and measured data. The comparison illustrates the important role particle shape plays in the transport of calcareous sand. All four sediment transport models give consistent predictions and good agreement with the majority of the measured data. Two of the models respond positively to the corrections in both the bed-form and suspended transport stages indicating that such an approach may provide an interim solution for the transport of calcareous sand.