Transport rate of drifting snow and the mean wind speed profile

Transport rates, measured by weighing snow blown into a filter fabric trap, were greater over hard snow or ice than for the same wind speed over soft, fresh snow surfaces. Analysis of wind speed profiles from nine blizzards showed that friction between moving particles and the surface was less, and particle speeds were greater over hard surfaces. Transport rates at a given wind speed increased rapidly as aerodynamic roughness decreased in the rough-smooth transition region. Bagnold's theory for bed load transport provided a useful framework for the analysis.     

Experimental and analytical study on design performance of full-scale viscoelastic dampers

Viscoelastic (VE) dampers, with their stiffness and energy dissipation capabilities, have been widely used in civil engineering for mitigating wind-induced vibration and seismic responses of structures, thus enhancing the comfort of residents and serviceability of equipment inside. In past relevant research, most analytical models for characterizing the mechanical behavior of VE dampers were verified by comparing their predictions with performance test results from small-scale specimens, which might not adequately or conservatively represent the actual behavior of full-scale dampers, especially with regard to the ambient temperature, temperature rise, and heat convection effects. Thus, in this study, by using a high-performance testing facility with a temperature control system, full-scale VE dampers were dynamically tested with different displacement amplitudes, excitation frequencies, and ambient temperatures. By comparing the analytical predictions with the experimental results, it is demonstrated that adopting the fractional derivative method together with considering the effects of excitation frequencies, ambient temperatures, temperature rises, softening, and hardening, can reproduce the design performance of full-scale VE dampers very well.     

A very large scale GIS-based groundwater flow model for the Nubian sandstone aquifer in Eastern Sahara (Egypt,northern Sudan and eastern Libya)

A three-dimensional GIS-based groundwater flow model for the Nubian Sandstone Aquifer in the eastern Sahara was developed and calibrated under steady-state and transient conditions. The model was used to simulate the response of the aquifer to climatic changes that occurred during the last 25,000 years. The simulation results indicated that the groundwater in this aquifer was formed by infiltration during the wet periods 20,000 and 5,000 years b.p. The recharge of groundwater due to regional groundwater flow from more humid areas in the south was excluded. It also indicates that the Nubian Aquifer System is a fossil aquifer, which had been in an unsteady state condition for the last 3,000 years.

---

Resumen Fue desarrollado un modelo de flujo de agua subterránea en tres dimensiones, basado en un SIG, para el Acuífero Arenisca Nubian en el Sahara Oriental, el cual fue calibrado para condiciones de estado estacionario y transitorio. El modelo se usó para simular la respuesta del acuífero a los cambios climáticos que ocurrieron durante los últimos 25000 años. Los resultados de esta simulación indicaron que el agua subterránea en este acuífero, se formó por infiltración, durante los períodos húmedos que hubo hace 20000 y 5000 años, antes del presente. Fue excluida la recarga del acuífero debida a un flujo regional de agua subterránea proveniente de áreas con un clima más húmedo en el sur. El modelo también muestra, que el Sistema Acuífero Nubian es un acuífero fósil, el cual ha permanecido en una condición de estado no estacionario, durante los últimos tres mil años.

---

Résumé Pour laquifère gréseux Nubien de Sahara -Est on a mis au points un modèle tridimensionnel, basé sur GIS. Le modèle a été calibré tant pour lécoulement stationnaire que pour lécoulement transitoire. On a simulé après la réponse de laquifère aux changements climatiques des derniers 25000 ans. Les résultats des simulations indiquent que la nappe a été rechargée par des infiltrations pendant une période humide qui sétend 5000 et 20000 ans, dès temps actuel. On na pas pris en compte la recharge de laquifère par la zone plus humide située dans sa partie sud. Le modèle indique aussi que leau de laquifère Nubien est une eau fossile qui a eu un écoulement transitoire pendant les derniers 3000 ans.

     

The Extraction of Urban Surface Water from Hyperspectral Data Based on Spectral Indices

To prevent confusion between water and buildings in the extraction of urban surface water from hyperspectral data, we analyzed the spectra of shadows and water in hyperspectral images, and proposed an anti-shadow water extraction method. This method first uses the normalized difference vegetation index (NDVI) for initial water extraction, then uses the height of the reflectance peak at 588 nm to eliminate the shadow of buildings. The method was validated by two hyperspectral datacubes, which were obtained for Jiaxing City and Zhoushan City in Zhejiang Province, China. Compared to the common spectral indices used to extract a water body, such as the NDVI, normalized difference water index, hyperspectral difference water index, and index of water index, the proposed method could effectively eliminate the shadow of buildings. The commission error reduced from more than 40% to about 15%, and the Kappa coefficient was increased from 60 and 70% to over 80% for the two datacubes. This indicated that the proposed method can inhibit the shadow of buildings and does not have a regional dependence.     

Bücher- und Zeitschriftenschau

Ohne Zusammenfassung     

Selenium in a shore bird,the dunlin,from the Dutch Waddenzee

The hypothesis that Se is secreted by birds via the preen gland or salt glands, thus contaminating the feathers, has been investigated. It is concluded that the feather vanes show indirectly in this way the birds' e?posure to Se. Therefore they can be used as an indicator tissue for this element.     

Variability in bedform morphology and kinematics with transport stage

Bedform geometry is widely recognized to be a function of transport stage. Bedform aspect ratio (height/length) increases with transport stage, reaches a maximum, then decreases as bedforms washout to a plane bed. Bedform migration rates are also linked to bedform geometry, in so far as smaller bedforms in coarser sediment tend to migrate faster than larger bedforms in finer sediment. However, how bedform morphology (height, length and shape) and kinematics (translation and deformation) change with transport stage and suspension have not been examined. A series of experiments is presented where initial flow depth and grain size were held constant and the transport stage was varied to produce bedload dominated, mixed‐load dominated and suspended‐load dominated conditions. The results show that the commonly observed pattern in bedform aspect ratio occurs because bedform height increases then decreases with transport stage, against a continuously increasing bedform length. Bedform size variability increased with transport stage, leading to less uniform bedform fields at higher transport stage. Total translation‐related and deformation‐related sediment fluxes all increased with transport stage. However, the relative contribution to the total flux changed. At the bedload dominated stage, translation‐related and deformation‐related flux contributed equally to the total flux. As the transport stage increased, the fraction of the total load contributed by translation increased and the fraction contributed by deformation declined because the bedforms got bigger and moved faster. At the suspended‐load dominated transport stage, the deformation flux increased and the translation flux decreased as a fraction of the total load, approaching one and zero, respectively, as bedforms washed out to a plane bed.