Carbon fluxes from eroding peatlands – the carbon benefit of revegetation following wildfire

Peatlands are among the largest long‐term soil carbon stores, but their degradation can lead to significant carbon losses. This study considers the carbon budget of peat‐covered sites after restoration, following degradation by past wildfires. The study measured the carbon budget of eight sites: four restored‐revegetated sites, two unrestored bare soil control sites, and two intact vegetated controls over two years (2006–2008). The study considered the following flux pathways: dissolved organic carbon (DOC); particulate organic carbon (POC); dissolved carbon dioxide (CO₂); primary productivity; net ecosystem respiration, and methane (CH₄). The study shows that unrestored, bare peat sites can have significant carbon losses as high as 522 ± 3 tonnes C/km²/yr. Most sites showed improved carbon budgets (decreased source and/or increased sink of carbon) after restoration; this improvement was mainly in the form of a reduction in the size of the net carbon source, but for one restored site the measured carbon budget after four years of restoration was greater than observed for vegetated controls. The carbon sequestration benefit of peatland restoration would range between 122 and 833 tonnes C/km²/yr. Copyright © 2011 John Wiley & Sons, Ltd.     

A laboratory study of the turbulent ekman layer

Abstract

Comparing characteristics of a turbulent Ekman boundary layer in a rotating apparatus with atmospheric observations and theories, we find that the similarity relations derived by Kazanski and Monin, and others, scale both laboratory and field data quite well, especially considering that the Coriolis parameter is larger by a factor of 10⁵ in the experiment than it is in the atmosphere. Eddy viscosity models and Deardorff's numerical model predict the properties of both with varying degrees of success. High frequency spectra of velocity fluctuations scale with the Kolmogoroff length and time scales. Both magnitude and direction of the surface shear stress were measured directly, with a heated film stress gauge.     

Geochemistry of redeposited and undisturbed ancient weathering zones in the Baikal Region

The distribution of major and trace elements was explored in the metamorphised weathering zones of the northern (Purpol Formation) and western (Anai and Angin formations) Baikal region. The alumina-rich schists of the Purpol and Anai formations intercalated with quartzites have a model age of 2.8–3.0 Ga and are redeposited products of the weathering of granitized basement inliers of the Siberian craton. Their trace element characteristics with high contents of Th, U, Nb, and REE and low Ta and Sr reflect the composition of predominant rocks in the Archean basement. Undisturbed weathering zones over the alkaline and calc-alkaline island-arc basalts of the Angin Formation are, in general, similar to modern laterites and redeposited residues with respect to the enrichment in hydrolyzate elements but are assigned to iron-rich laterites and distinguished by high contents of Fe, Ti, Nb, Ta, Zr, and Hf, which were inherited from their parent rocks. Their occurrence suggests subaerial eruptions of alkali basalts in the proximal part of the Angin-Talanchan island arc.     

Geochemistry and Petrogenesis of Late Ediacaran Rare-metalAlbite Granites of the Arabian-Nubian Shield

The Abu Dabbab albite granite(ADAG), in the central Eastern Desert of Egypt, hosts the most significant rare metal ore deposit in the northern part of the Neoproterozoic Arabian-Nubian Shield. Here, we report detailed field,petrographic, mineralogical and geochemical investigation of the ADAG, an isolated stock-like granitic body with sharp intrusive contacts against metamorphic country rocks, probably emplaced at about 600 Ma. The fine-grained porphyritic upper unit is a preserved remnant of the shallowly-emplaced apex of the magma chamber, whereas the medium-grained lower unit crystallized at deeper levels under subvolcanic conditions. The peraluminous leucocratic ADAG shares common geochemical characteristics with post-collisional intraplate A-type magmas. In addition to the conspicuous enrichment in Na2 O, the ADAG is remarkable for its anomalous concentrations of Ta, Nb, Li, Hf, Ga, Sn, Zn and heavy rare-earth elements. Nb-Ta minerals in the ADAG are mixed with Fe-Mn oxides, forming black patches that increase in abundance toward of the base of the intrusion. Columbite-tantalite, cassiterite and wolframite are the most important ore minerals.Pronounced negative Eu anomalies(Eu/Eu* = 0.10–0.24) reflect extreme magmatic fractionation and perhaps the effects of late fluid-rock interaction. The ADAG was most likely generated by partial melting of the juvenile middle crust of the ANS as the geotherm was elevated by erosional uplift following lithospheric delamination and it was emplaced at the intersection of lineations of structural weakness. Although formation of the ADAG and its primary enrichment in rare metals are essentially due to magmatic processes, late-stage metasomatism caused limited redistribution of rare metals. Fluid-driven subsolidus modification was limited to the apex of the magma chamber and drove development of greisen, amazonite, and quartz veins along fracture systems.     

Isotopic constraints on growth conditions of multiphase calcite–pyrite–barite concretions in Carboniferous mudstones

Carbonate concretions in the Lower Carboniferous Caton Shale Formation contain diagenetic pyrite, calcite and barite in the concretion matrix or in different generations of septarian fissures. Pyrite was formed by sulphate reduction throughout the sediment before concretionary growth, then continued to form mainly in the concretion centres. The septarian calcites show a continuous isotopic trend from δ¹³C=?28·7‰ PDB and δ¹⁸O=?1·6‰ PDB through to δ¹³C=?6·9‰ PDB and δ¹⁸O=?14·6‰ PDB. This trend arises from (1) a carbonate source initially from sulphate reduction, to which was added increasing contributions of methanogenic carbonate; and (2) burial/temperature effects or the addition of isotopically light oxygen from meteoric water. The concretionary matrix carbonates must have at least partially predated the earliest septarian cements, and thus used the same carbonate sources. Consequently, their isotopic composition (δ¹³C=?12·0 to ?10·1‰ PDB and δ¹⁸O=?5·7 to ?5·6‰ PDB) can only result from mixing a carbonate cement derived from sulphate reduction with cements containing increasing proportions of carbonate from methanogenesis and, directly or indirectly, also from skeletal carbonate. Concretionary growth was therefore pervasive, with cements being added progressively throughout the concretion body during growth. The concretions contain barite in the concretion matrix and in septarian fissures. Barite in the earlier matrix phase has an isotopic composition (δ³⁴S=+24·8‰ CDT and δ¹⁸O=+16·4‰ SMOW), indicating formation from near‐surface, sulphate‐depleted porewaters. Barites in the later septarian phase have unusual isotopic compositions (δ³⁴S=+6 to +11‰ CDT and δ¹⁸O=+8 to +11‰ SMOW), which require the late addition of isotopically light sulphate to the porewaters, either from anoxic sulphide oxidation (using ferric iron) or from sulphate dissolved in meteoric water. Carbon isotope and biomarker data indicate that oil trapped within septarian fissures was derived from the maturation of kerogen in the enclosing sediments.     

Cenozoic tectonic events at the border of the Paraná Basin, São Paulo, Brazil

In the last decade, even in areas that had been considered tectonically stable, a great amount of Cenozoic, including the Quaternary period, structural data have been collected throughout Brazil. The main goal of this study is to describe the Cenozoic structures and tectonic evolution of an area that is located at the border of the Paraná Basin in the state of São Paulo.The research methods consisted of the analysis of: (1) brittle structure data, mainly conjugate fractures and fault slip data; (2) lineaments traced on air photos and TM Landsat and radar images; and (3) a second-order base surface map.The study area, during the Cenozoic, has been affected by five strike–slip tectonic events, which generated mainly strike–slip faults, and secondarily normal and reverse ones. The events were named, from the oldest to the youngest, E1-NE, E2-EW, E3-NW, E4-NS, and E5-NNE; and the maximum principal stresses σ1 strike approximately NE–SW, E–W, NW–SE, N–S, and NNE–SSW, respectively. Event E2-EW seems to have been contemporaneous with the deposition of the Rio Claro Formation, the most important Cenozoic deposit of probable Neogenic age, and also to have controlled the distribution of its deposits. Event E3-NW was the strongest one in the area, as is pointed out by structural data, and the maximum principal stress σ1 of event E5-NNE is partially concordant with the orientation of σH-max of well break-out data in the Paraná Basin, suggesting a Neotectonic activity for this event. Finally, discontinuities parallel and correlated to the directions of strike–slip faults of the Cenozoic events seem to have actively controlled the sculpturing of the relief in the study area.     

Interaction of the Atmosphere and Lithosphere in the Minute Range of Periods

Doklady Earth Sciences - The interaction between the atmosphere and the lithosphere in the minute range of periods is considered. The technique of assessment of the influence of atmospheric...     

Olivine in ultramafic lamprophyres: chemistry,crystallisation, and melt sources of Siberian Pre- and post-trap aillikites

We studied olivines from the Devonian pre-trap (the Ilbokich occurrence) and the Triassic post-trap (the Chadobets occurrence) carbonate-rich ultramafic lamprophyres (UMLs) in the southwestern portion of the Siberian craton. On the basis of detailed investigations of major, minor, and trace-element distributions, we have reconstructed the main processes that control the origins of these olivines. These include fractional crystallisation from melt, assimilation, and fractional crystallisation processes with orthopyroxene assimilation, melt-reaction diffusive re-equilibration, alkali enrichment, and CO₂ degassing of the melt. Furthermore, we inferred the composition of the sources of the primary UML melt and their possible correlations with proto-kimberlitic melts, as well as the influence of the Triassic Siberian plume on the composition of the lithospheric mantle. The main differences between olivines from the Ilbokich and the Chadobets aillikites were that the olivines from the former had more magnesium-rich cores (Mg# = 89.2?±?0.2), had Mg- and Cr-rich transition zones (Mg# = 89.7?±?0.2 and 300–500 ppm Cr), had lower Ni (up to 3100 ppm) and Li (1.4–1.5 ppm), and had higher B (0.8–2.6 ppm) contents, all at higher Fo values (90–86), relative to the olivines from the latter (Mg# = 88–75; 200–300 ppm Cr; up to 3400 ppm Ni; 1.4–2.4 ppm Li; 0.4–2.2 ppm B). The Siberian aillikite sources contained a significant amount of metasomatic material. Phlogopite-rich MARID-type veins provided the likely metasomatic component in the pre-trap Devonian Ilbokich aillikite source, whereas the Triassic Chadobets aillikitic post-trap melts were derived from a source with a significant carbonate component. A comparison of UML olivines with olivines from the pre-trap and post-trap Siberian kimberlites shows a striking similarity. This suggests that the carbonate component in the aillikitic source could have been produced by evolved kimberlite melts. The differences in the lithospheric metasomatic component that contributed to pre-trap and post-trap aillikitic melts can be interpreted as reflections of the thermal impact of the Siberian Traps, which reduced phlogopite-bearing metasomes within the southwestern Siberian sub-continental lithospheric mantle.     

Anaerobic digested sludge: a new supplementary nutrient source for ethanol production

Effluent sludge from an anaerobic digester was used as a source of nitrogen, phosphate, sulfur, and other nutrients in the culture medium of ethanol production by the yeast Saccharomyces cerevisiae. Several pretreatments (mechanical, chemical, thermal, and thermo-chemical) were performed on the anaerobic digested sludge (ADS) to make the nutrients accessible to the yeast cells. Preliminary experiments revealed that S. cerevisiae is not able to assimilate the carbon content of the ADS. However, when glucose was added to the medium, ethanol production was observed. The yield of ethanol using untreated ADS was only 10 % of the theoretical yield, but alkaline pretreatment improved it up to 43 %. By separating the hydrolysate of alkaline-treated ADS from the suspended solids, the ethanol yield from the supernatant was further improved up to 65 % of theoretical yield. Alkaline-treated ADS exhibited competitive performance with the mixture of yeast extract and mineral salts in ethanol fermentation.     

Emulating the OPAL equation of state

The equation of state for the structure of the Sun and stars has to be precise to allow comparisons with observations, i.e., helioseismic inversions of thermodynamic quantities. Among the two of the most popular formalisms are (1) the OPAL equation of state developed at Livermore and (2) the Mihalas-Hummer-Däppen (MHD) equation of state. While OPAL has a solid theoretical foundation, and matches the observational data better, the MHD formalism is more intuitive, easy to realize, and has the possibility of adjustable parameters. Furthermore, it an open-source product in contrast to the proprietary OPAL. Recently a version of MHD has been obtained by including the so-called “Plank-Larkin partition function” and by adding scattering-state terms. The resulting formalism matches OPAL rather well. Here, we report on the next logical step, the implementation of this MHD upgrade into the simple and popular CEFF equation of state. Such an implementation will make it a flexible and convenient tool, allowing an approximative on-line implementation of OPAL in solar and stellar models.