Acceleration response modification factors for nonstructural components attached to inelastic moment‐resisting frame structures

A statistical analysis of the peak acceleration demands for nonstructural components (NSCs) supported on a variety of stiff and flexible inelastic regular moment‐resisting frame structures with periods from 0.3 to 3.0 s exposed to 40 far‐field ground motions is presented. Peak component acceleration (PCA) demands were quantified based on the floor response spectrum (FRS) method without considering dynamic interaction effects. This study evaluated the main factors that influence the amplification or decrease of FRS values caused by inelasticity in the primary structure in three distinct spectral regions namely long‐period, fundamental‐period, and short‐period region. The amplification or decrease of peak elastic acceleration demands depends on the location of the NSC in the supporting structure, periods of the component and building, damping ratio of the component, and level of inelasticity of the supporting structure. While FRS values at the initial modal periods of the supporting structure are reduced due to inelastic action in the primary structure, the region between the modal periods experiences an increase in PCA demands. A parameter denoted as acceleration response modification factor (R_acc) was proposed to quantify this reduction/increase in PCA demands. Copyright © 2007 John Wiley & Sons, Ltd.     

Solar limb darkening in the wings of the CaII H and K lines

The method for measuring solar limb darkening has been proposed, and the formulas, describing the law of solar limb darkening in the wings of the CaII H (396.849 nm) and K (393.369 nm) lines, have been derived. To operate at arbitrary points on the Sun’s surface, it is necessary to know the law of solar limb darkening, which is specific in different spectral regions. The procedure of spectrum correction for a flat field, proposed in our previous works, is based on comparing line-free spectral regions with the solar center reference spectrum from the atlas by Brault and Neckel [1994].     

Linking Tarim Basin sea retreat (west China) and Asian aridification in the late Eocene

The Tarim Basin in western China formed the easternmost margin of a shallow epicontinental sea that extended across Eurasia and was well connected to the western Tethys during the Paleogene. Climate modelling studies suggest that the westward retreat of this sea from Central Asia may have been as important as the Tibetan Plateau uplift in forcing aridification and monsoon intensification in the Asian continental interior due to the redistribution of the land‐sea thermal contrast. However, testing of this hypothesis is hindered by poor constraints on the timing and precise palaeogeographic dynamics of the retreat. Here, we present an improved integrated bio‐ and magnetostratigraphic chronological framework of the previously studied marine to continental transition in the southwest Tarim Basin along the Pamir and West Kunlun Shan, allowing us to better constrain its timing, cause and palaeoenvironmental impact. The sea retreat is assigned a latest Lutetian–earliest Bartonian age (ca. 41 Ma; correlation of the last marine sediments to calcareous nannofossil Zone CP14 and correlation of the first continental red beds to the base of magnetochron C18r). Higher up in the continental deposits, a major hiatus includes the Eocene–Oligocene transition (ca. 34 Ma). This suggests the Tarim Basin was hydrologically connected to the Tethyan marine Realm until at least the earliest Oligocene and had not yet been closed by uplift of the Pamir–Kunlun orogenic system. The westward sea retreat at ca. 41 Ma and the disconformity at the Eocene–Oligocene transition are both time‐equivalent with reported Asian aridification steps, suggesting that, consistent with climate modelling results, the sea acted as an important moisture source for the Asian continental interior.     

Airborne radar and in-situ observations of a shallow stratus with drizzle

Observations were made of a shallow stratus of upslope origin using an aircraft equipped with insitu probes and with a vertically-pointing radar of 3-mm wavelength. A cloud layer of 300 m thickness was found below the inversion; an additional layer of 100 m thickness was located within the inversion. The coldest temperature within the cloud was -2°C and the cloud contained no ice particles. Drizzle drops up to 180 Am were present in both cloud layers.The observations reveal precipitation and air motion structures of approximately 1 km horizontal dimensions. The origin of this organization appears to be weak convection. In addition, mixing played an important role in forming the cloud droplet and drizzle drop size distributions.     

Life cycle assessment of pyrolysis–gasification as an emerging municipal solid waste treatment technology

Waste-to-energy technologies are considered as one of the key waste treatment technologies due to their energy and heat recovery efficiencies from the waste. A number of research studies were accomplished to understand the potential environmental burdens from emerging waste treatment technologies such as pyrolysis–gasification (PG). The aim of this study was to examine the PG of municipal solid waste (MSW) treatment process through a life cycle assessment (LCA) method. The study also includes a comparative LCA model of PG and incineration to identify the potential environmental burdens from the existing (incineration) and emerging (PG) waste treatment technologies. This study focused on ten environmental impact categories under two different scenarios, namely: (a) LCA model of PG and (b) comparative LCA model of PG and incineration. The scenario (a) showed that PG had significant environmental burdens in the aquatic eco-toxicity and the global warming potential impact categories. The comparative scenario (b) of PG and incineration of MSW showed that PG had comparatively lower potential environmental burdens in acidification, eutrophication, and aquatic eco-toxicity. Both LCA models showed that the environmental burdens were mainly caused by the volume of the thermal gas (emissions) produced from these two technologies and the final residue to disposal. Therefore, the results indicate that the efficiency and environmental burdens of the emerging technologies are dependent on the emissions and the production of final residue to the landfill.     

Exploring the diverse potentials of <Emphasis Type="Italic">Planococcus</Emphasis> sp. TRC1 for the deconstruction of recalcitrant kraft lignin

Kraft lignin (KL) is the chief contaminant which is responsible for dark coloration, toxicity and high chemical oxygen demand (COD) of paper pulp mill effluent. The present study investigated the diverse potentials of Planococcus sp. TRC1 in the biodegradation of KL. Preliminary evaluation indicated that the strain was able to grow on broad spectrum of lignin-derived compounds, decolorize lignin-mimicking dyes and catabolize substrates of ligninolytic enzymes. Response surface methodology (RSM) was executed to perform the optimization of different process parameters. The results displayed that Planococcus sp. TRC1 could completely utilize 100 mg L^?1 of KL and 78% of 200 mg L^?1 of KL as sole source of carbon with concurrent reduction in COD and color. The biokinetic details of KL biodegradation showed that the values of \(\mu^{*}\), µ _max, \(q^{*}\) and q _max were 0.018 h^?1, 0.01 h^?1, 0.023 g g^?1 h^?1 and 0.05 g g^?1 h^?1, respectively. UV–visible spectrophotometry, SEM and FTIR indicated the significant alterations in the surface morphology, functional groups and chromophores during the course of biodegradation. XRD revealed the emergence of peak signifying the formation of low molecular weight intermediates after bacterial treatment. Considering the environmental impact, bacterial-treated KL illustrated less phytotoxicity using Vigna radiata seed bioassay. These results suggested that Planococcus sp. TRC1 could be a promising strain for the degradation of KL in an ecofriendly way.