GEOPHYSICAL STUDIES OF WATER LEAKAGES FROM RESERVOIRS*

Considerable water leakages from reservoirs make it difficult to attain the planned storage capacity. In some cases water leakages give rise to suffusion followed by catastrophes. Until recently methods for locating water leakages were extremely imperfect. Geophysical methods offer good prospects in this direction. For solving these problems, it is effective to use streaming potential measurements, water flow rate observations and thermometry. Laboratory experiments were carried out in connection with the fact that water leakages from reservoirs are characterized by negative anomalies of natural currents; the more filtration discharge, the higher these anomalies are. As a result, the relationship governing the intensity of streaming potential and sand granulometric composition, electrolyte concentrations and other factors were revealed. To determine the velocity of water flowing to leakage sites, a special device, based on the relationship between the temperature of a heated body and its resistance, is applied. This device simultaneously makes it possible to measure the water medium temperature. Observations at reservoir sites were effected by moving along the reservoir non-polarizable potential electrodes and water velocity devices. Recordings were carried out automatically by the recording device of the logging apparatus. Under the conditions of ice cover on water surfaces, measurements were made through separate points by digging holes in the ice cover. Practical field observations were carried out at reservoir sites located in regions where fissured massive rocks as well as loose sediments predominate. In the first case field experiments were carried out in alpine reservoirs, in Armenia. The major water leakages were found to be concentrated on the right bank of the reservoir. In this connection it was not only possible to locate water leakage sites, but also to evaluate their relative intensity. These data were used for planning antifiltration measures. In the second case water leakages from a reservoir located in Uzbekistan in the submontane part of the Pamirs were studied. Streaming potential anomalies and high benthonic flow rates made it possible to discover high filtrations in the base and walls of the dam. Further perfection of these methods should not only permit the determination of water leakage sites and their relative intensity, but also filtration discharges in absolute units.     

SOME EXPERIMENTS CONCERNING THE PRIMARY SEISMIC PULSE*

Recordings were made with three types of detector of the primary compressional (P) and shear (S) wave pulses generated by explosions in boreholes. Charge weights varied from 0.08 kg to 9.5 kg and detector distances varied from about 3 m to about 80 m. Scaling by the simple factor W^1/3 where W is the charge weight, enabled observations from different sized charges to be fitted to a single expression. Experiments were carried out in the Bunter sandstone and the London clay and both fluid and solid tamping were used. This variation in tamping had no significant effect on the P-waves but it may have affected the generation of SV-waves. In both media the P-wave energy carried at 30 m from the shot by frequencies less than 100 Hz decreased rapidly with depth and was usually 1–2 % of the available chemical energy for a shot depth of 15 m. The S-wave energy was much less than this, but was highly directional. The P-wave pulse had the appearance of a damped sinusoid in very good agreement with the predictions of the ‘equivalent radiator’ hypothesis. However, the surface of this radiator should be identified not with the blown cavity but with the surface at which the tensile stresses associated with the stress wave become less than the tensile strength of the rock. The predominant frequency for a 1 kg charge at a depth of 15 m was 24 Hz in the clay and 52 Hz in the sandstone. In these and similar media, therefore, an effort should be made to keep individual charges less than 1 kg in reflection shooting and less than 10 kg in refraction shooting. The value of Q was about 50 in clay and about 25 in the sandstone. These estimates are rather uncertain because of the small distances over which the pulses were observed. The Z-transforms of the sampled pulses indicated that they were all of minimum phase, or very near to it.     

THE ELECTRICAL CURRENT PATTERN INDUCED BY AN OSCILLATING MAGNETIC DIPOLE IN A SEMI INFINITE CONDUCTIVE THIN PLATE*

In a paper by Koefoed and Kegge (1968), which was based on previous work of Wesley (1958), the electrical current pattern has been derived that is induced by an oscillating magnetic dipole in a semi-infinite thin plate of infinitesimal resistivity. In the present paper, the range of validity of the assumptions, on which the work of Wesley is based, is subjected to a theoretical analysis. It is found that the decisive factor for the validity of Wesley's derivation is the quotient of the square of the penetration depth of the electrical current over the product of the thickness of the plate and a distance that is indicative of the size of the current loops in the plate. Wesley's derivation is shown to be valid only when this factor is negligible. It is also shown that in this condition the imaginary component of the anomaly must be negligible. Model experiments are described in which the electrical current pattern is studied also in the range in which the derivation of Wesley is not valid. The procedure used in these model experiments was to measure the tangential component of the magnetic field strength very close to the metal plate that simulated the conductive dyke. In order to express the results of the measurements in terms of the imaginary to real ratio, these results are compared with an interpretation graph for field measurements that was published by Hedström and Parasnis (1958). It is found that the current pattern in the plate is essentially the same as that which follows from Wesley's derivation, provided that the imaginary to real ratio is less than one third. The measurements do not permit to draw conclusions regarding the current pattern in the plate in conditions that correspond to larger values of the imaginary to real ratio.     

THE LAUSANNE CONGRESS

The International Society for Photogrammetry held the Xlth International Congress at Lausanne during July 1968. The authors review the activities of five of the seven I.S.P. Commissions.     

THOUGHTS ON MAPPING BY PHOTOGRAMMETRY

Topics of immediate practical interest formed the basis of the Address. Particular emphasis was placed upon problems of point transfer, pre-marking of ground control points, aerial triangulation by observation of independent models, and the status of photogrammetric operators.     

ANALYTICAL AERIAL TRIANGULATION BLOCK ADJUSTMENT; THE DIRECT HEIGHT SOLUTION INCORPORATING TIE-STRIPS

The historical development of analytical aerial triangulation block adjustment is mentioned by way of introduction. The advantages of separating the plan and height adjustments are given and the observation equations of a typical adjustment section are analysed to show that this convenient practice is justified in normal circumstances. The principles of a direct solution of the normal equations suitable for a moderate-sized computer, are explained and developed in detail for the height adjustment. The advantages of tie-strips in the height adjustment are demonstrated and the difficulties which then arise are discussed. An approximate method which overcomes these difficulties is developed. Details of the computer programmes used are given in Appendix B.     

Evolution of Part of the Lower Critical Zone, Farm Ruighoek, Western Bushveld

This study of a part of the lower Critical Zone, Farm Ruighoek,Western Bushveld, is based mainly on selected drill core samplesfrom two sections approximately 1.2 miles apart. The 1300-ftsequence investigated consists of pyroxenites with two harzburgitebands and sixteen chromitite seams. Results obtained are consistent with the hypothesis that evolutionof the sequence was a cyclic process in which cumulate mineralscrystallized in a zone near the floor of accumulation undergenerally quiescent conditions. Compositional changes of cumulateminerals reflect the influence of a separate intrusion of undifferentiatedparent magma or refusion at depth of crystals formed near thetop of the magma chamber. Interstitial mineral content and plagioclasecomposition reflect changing rates of crystal accumulation.Orthopyroxene grain size and sorting coefficient reflect, inpart, the vertical distance over which crystallization occurred.Textural features and contact relations of chromitite seamsare consistent with the hypothesis that most chromite crystallizedfrom the silicate magma and accumulated during a period of littleor no crystallization of silicate minerals. It is postulatedthat this loose crystal assemblage was enriched by co-accumulationand partial in situ crystallization of chromite-rich immiscibleliquid. Textural, mineralogical, and compositional changes infootwalls and hanging walls of chromitite seams are thoughtto reflect in situ reactions.