Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

A new form of generalized Boussinesq equations for varying water depth

A new set of equations of motion for wave propagation in water with varying depth is derived in this study. The equations expressed by the velocity potentials and the wave surface elevations include first-order non-linearity of waves and have the same dispersion characteristic to the extended Boussinesq equations. Compared to the extended Boussinesq equations, the equations have only two unknown scalars and do not contain spatial derivatives with an order higher than 2. The wave equations are solved by a finite element method. Fourth-order predictor–corrector method is applied in the time integration and a damping layer is applied at the open boundary for absorbing the outgoing waves. The model is applied to several examples of wave propagation in variable water depth. The computational results are compared with experimental data and other numerical results available in literature. The comparison demonstrates that the new form of the equations is capable of calculating wave transformation from relative deep water to shallow water.     

Calibration of JASON-1 Altimeter over Lake Erie

This article describes absolute calibration results for both JASON-1 and TOPEX Side B (TSB) altimeters obtained at the Lake Erie calibration site, Marblehead, Ohio, USA. Using 15 overflights, the estimated JASON altimeter bias at Marblehead is 58 ± 38 mm, with an uncertainty of 19 mm based on detailed error analysis. Assuming that the TSB bias is negligible, relative bias estimates using both data from the TSB-JASON formation flight period and data from 48 water level gauges around the entire Great Lakes confirmed the Marblehead results. Global analyses using both the formation flight data and dual-satellite (TSB and JASON) crossovers yield a similar relative bias estimate of 146 ± 59 mm, which agrees well with open ocean absolute calibration results obtained at Harvest, Corsica, and Bass Strait (e.g., Watson et al. 2003). We find that there is a strong dependence of bias estimates on the choice of sea state bias (SSB) models. Results indicate that the invariant JASON instrument bias estimated oceanwide is 71 mm, with additional biases of 76 mm or 28 mm contributed by the choice of Collecte Localisation Satellites (CLS) SSB or Center for Space Research (CSR) SSB model, respectively. Similar analysis in the Great Lakes yields the invariant JASON instrument bias at 19 mm, with the SSB contributed biases at 58 mm or 13 mm, respectively. The reason for the discrepancy is currently unknown and warrants further investigation. Finally, comparison of the TOPEX/POSEIDON mission (1992-2002) data with the Great Lakes water level gauge measurements yields a negligible TOPEX altimeter drift of 0.1 mm/yr.     

Macrobenthic Communities of the Eastern Mediterranean Continental Shelf

Abstract. The results of a year long study in which soft-bottom epibenthic invertebrates were collected by grab, dredge and beam-trawl, along the southern Mediterranean coast of Israel, are described in this paper. The classificatory analysis used for both normal and inverse analyses used two measures of dissimilarity - Canberra metric and Bray-Curtis, and both group-average and nearest-neighbour clustering. The results were displayed as dendrograms. Four site groups and five species groups characterised a total of 58 site samples and 245 species. The prominent species in each of the five species groups are mentioned. The applicability of "community concepts" and the effects of sediment properties on community structure are discussed.     

Towards a more detailed seismic picture of the oceanic crust and mantle

A review is presented of current interpretation techniques in marine refraction seismology with particular emphasis on those features which are most useful in structural studies using ocean bottom seismometers. Travel time analysis techniques are discussed for both refraction and variable angle reflection profiles and are compared with systematic travel time inversion methods. Amplitude and waveform analysis techniques allow a more detailed velocity depth profile to be determined, and are illustrated for both surface and bottom receivers. The study of anisotropy and lateral variations in crustal structure may be usefully combined using delay time function methods but a detailed structural model also requires velocity-depth information. Signal processing techniques which are particularly useful for shear wave and long range propagation studies are also metioned. Structural studies using OBS' should lead to detailed knowledge of the oceanic crust and the P wave velocity distribution in the upper mantle.     

Solution of an unstable axisymmetric Cauchy–Poisson problem of dispersive water waves for a spectrum with compact support

 It has been known that the axisymmetric Cauchy–Poisson problem for dispersive water waves is well posed in the sense of stability. Thereby time evolution solutions of wave propagation depend continuously on initial conditions. However, in this paper, it is demonstrated that the axisymmetric Cauchy–Poisson problem is ill posed in the sense of stability for a certain class of initial conditions, so that the propagating solutions do not depend continuously on the initial conditions. In order to overcome the difficulty of the discontinuity, Landweber–Fridman's regularization, famous and well known in applied mathematics, are introduced and investigated to learn whether it is applicable to the present axisymmetric wave propagation problem. From the numerical experiments, it is shown that stable and accurate solutions are realized by the regularization, so that it can be applicable to the determination of the ill-posed Cauchy–Poisson problem.     

Trichodesmium erythraeum (Ehrenberg) bloom along the southwest coast of India (Arabian Sea) and its impact on trace metal concentrations in seawater

The incidence of a large scale Trichodesmium erythraeum bloom along the southwest coast of India (Arabian Sea) observed in May 2005 is reported. Around 4802 filaments of T. erythraeum ml⁻¹ seawater was observed and a colony consisted of 3.6 × 10⁵ cells. The bloom was predominant off Suratkal (12° 59′N and 74° 31′E) with a depth of about 47 m, covering an area of 7 km in length and 2 km width. The concentrations of Zinc, Cadmium, Lead, Copper, Nickel and Cobalt were determined in samples collected from the bloom and non-bloom sites using stripping voltammetry. The observed hydrographical and meteorological parameters were found to be favorable for the bloom. The concentrations of Zinc, Cadmium and Nickel were found to be higher at bloom stations, while the concentrations of Lead, Copper and Cobalt were found to be very low at bloom stations. Elevated concentrations of Cadmium and Cobalt were observed at Valappad mainly due to the decomposition of detrital material produced in the bloom. Statistically significant differences (P > 0.01) in metal concentrations between the bloom and non-bloom stations were not observed except for Copper. Metals such as Lead, Copper and Cobalt were removed from the seawater at all places where bloom was observed. Cadmium was found to be slowly released during the decaying process of the bloom.     

Organic matter origin and distribution in suspended particulate materials and surficial sediments from the western Adriatic Sea (Italy)

In this study, organic carbon (OC), total nitrogen (TN), stable carbon isotopic (δ¹³C_OC) and CuO reaction product compositions were used to identify the sources of organic matter (OM) and to quantify the relative importance of allochthonous and autochthonous contributions to the western Adriatic Sea, Italy. Suspended particulate material (195 samples) and surficial sediments (0–1 cm, 70 samples) from shallow cross-shelf transects were collected in February and May 2003, respectively. Vertical water column profiles were acquired along the same transects. Data include depth, potential temperature, salinity, density and chlorophyll fluorimetry.Along the western Adriatic shelf in the near-shore region, the phytoplankton growth was influenced by dynamics of the buoyant plumes from the Po and Appennine rivers. A small amount of very fine terrigenous material remained suspended within the coastal current and was exported southward along the shelf to the slope. High variability in the bulk composition was detected in the Po prodelta surficial sediments, whereas the western Adriatic shelf, although a larger area, exhibited a narrower range of values.A significant decoupling was observed between suspended particles in the water column and surficial deposits. The organic material collected in the water column was compositionally heterogeneous, with contributions from marine phytoplankton, riverine–estuarine phytoplankton and soil-derived OM. Frequent physical reworking of surficial sediments likely leads to the efficient oxidation of marine OC, resulting in the observed accumulation and preservation of refractory soil-derived OC delivered by the Po and Appennine rivers.     

Nannoplankton of the Atlantic Ocean from sediment trap samples

Calcareous nannoplankton from sediment trap samples collected at six sites in the Atlantic Ocean from 23° S to 73° N (cruise 20 of R/V Vityaz’ and cruise 33 and 34 of R/V Akademik Mstislav Keldysh). Those samples were studied with a scanning electron microscope. In the coastal and open-sea regions of the North and South Atlantic and in the subarctic region of the Norwegian Sea, the conditions are significantly different. In the shelf area of the Benguela upwelling, 11 species were recognized; some of them were agglutinated by diatoms and tintinnides or covered the surface of pellets. The Broken Spur and TAG pelagic areas of the North Atlantic contained up to 43 coccolith species. They included holococcoliths, large pelagic, and delicate easily soluble species distributed over the entire water column. The presence of coccoliths in the high-latitude area of the Norwegian Sea is related to their supply with the warmer North Atlantic waters. These assemblages are distinguished by a low species diversity and an enhancement of the coccolith solubility with the depth increase.