A digital event-recording ocean bottom seismometer capsule

The ocean bottom seismometer capsule contains a 1 Hz. vertical seismometer and triggerable or programmable digital recording system. The output of the seismometer is continuously digitized at a preselected rate of 64, 128, or 256 samples/sec. The digital data words are mixed with a time code and synchronization characters, serialized and passed through a 1536 sample shift register which acts as a delay line. The serial output bits are then encoded and recorded on a SONY TC800B tape recorder which is turned on when a seismic event occurs. The event trigger occurs when the seismic signal jumps to 8 times the time averaged input signal. A memory may be programmed to run the recorder on a schedule so that small amplitude signals from refraction shots are sure to be recorded. Data are recovered using the same recorder for playback and a decoder which provides an analog output for field data interpretation or a digital output for computer analysis. An acoustic transponder allows precise ranges between the capsule and ship to be determined. In addition, commands for the capsule to release or to transmit diagnostic data may be given from the surface ship. The capsule falls freely to the ocean bottom. After a predetermined time or when a release command is received, it is released from a 68 kg steel tripod and floats to the surface. A dual timer and explosive bolt system is used to increase recovery reliability.The first capsules were designed and constructed between October 1972 and October 1973. Good results were obtained from 38 out of 43 launchings made on six expeditions in 1974, 1975, and 1976. Four capsules have been lost.     

Centrifugal test of a road embankment built after new dredger fill on thick marine clay

Abstract

The construction of a 100-km road network is planned on a land reclamation area in the Oujiang Estuary in China. The embankment had a height of 4 m and a base width of 60 m. The reclamation area is newly filled by a 3-m dredger fill on a 48-m thick layer of marine clay. Estimation of the settlement of the future road network is difficult. To guide the construction of the road network, a 1/100-scale centrifuge model test was performed with a marine clay sample from the construction site to simulate the layered settlements and evaluate the drainage effect of prefabricated vertical drains in the dredger fill in the following 10 years. The results of the centrifuge modeling test are verified by 10-month in situ monitoring, which shows agreement between the centrifuge modeling test results and the in situ results. The test results indicate that additional time is needed to reinforce the newly added dredger fill by the surcharge preloading method to uplift the elevation of the reclamation area with dredger fill.     

Metabolism of perylene by monooxygenases of the skin and liver of Ambystoma tigrinum

The prevalence of dermal neoplasia among neotenic tiger salamanders (Ambystoma tigrinum) collected from the Reese Air Force Base sewage lagoon far exceeded that among salamanders from nearby uncontaminated lagoons. Perylene was the predominant pglycyclic aromatic hydrocarbon contaminant in this lagoon. Perylene was shown to be a substrate for monooxygenases in skin and liver homogenates and formed DNA-binding metabolites. Perylene exposure appeared to augment subsequent perylene metabolism by dermal enzymes but it was not a strong inducer of hepatic monooxygenases. Aroclor 1254 induced benzo(a)pyrene and perylene metabolism by both skin and liver enzymes. However, perylene apparently was not activated by salamander enzymes, as suggested by its lack of in vitro mutagenicity and failure to induce tumors.     

Deep tow studies of the Tamayo transform fault

The Tamayo transform fault occurs at the north end of the East Pacific Rise where it enters the Gulf of California. The two deep-tow surveys reported here show that the transform fault zone changes significantly as a function of distance from the spreading center intersections. At site 1, near the intersection, one side of the fault is young and the fault zone is narrow and well-defined. Strike slip occurs in a zone approximately 1-km wide suggesting a correspondingly narrow zone of decoupling between the Pacific and North American plates. On the young side of the strike-slip zone, normal faults occur along shear zones which are 45°–50° oblique to the transform strike. They occur parallel to the short axis of the strain ellipse for transform fault strain here, i.e., perpendicular to the least compressive stress. The transform walls are formed by normal faulting as has been pointed out in previous detailed surveys. Here, however, the age contrast of 2.5 m.y. across the transform valley is apparent in the morphology of the normal fault scarps. While the scarps are steep and well-defined on the young side, the scarps on the older side have gradual 10°–30° slopes and appear to be primarily talus ramps. Apparently, the scarps have been tectonically eroded by continued strike slip activity after the initial stages of normal faulting. Thus, transform valleys should be quite asymmetric in cross-section where there is a significant age contrast and one side is less than approximately 0.5 m.y. old. Also, along older sections of the transform valley walls, normal faulting may not be at all obvious due to degradation of the scarps by tectonic erosion. This phenomenon makes the likelihood of transform faults providing windows into the oceanic crust most unlikely except in special cases.The picture of transform deformation is more complex at site 2 in the central portion of the fault where both sides of the fault are greater than 1 m.y. old. Here the transform valley is wider (25–30 km as opposed to 2–5 km). There is no clear simple zone of strike slip tectonics. In fact, the only clear evidence for deformation is the intrusion of magmatic or serpentinite diapirs through the sediments of the transform valley floor. The diapirs have deformed the turbidite layers flooring the valley and in one carefully studied case the turbidite sequence has been uplifted, perched atop the diapir. The pattern of deformation on this outcropping diapir shows radial and concentric fractures which can be modeled by a vertical intrusion circular in plan view. Magnetic studies limit the possible composition to basalt or serpentinite. A 60-km-long median ridge is also likely to be the product of intrusion along the transform fault. The survey at site 2 pointed out the importance of vertical tectonics in the transform valley floor and in particular the importance of diapiric intrusions of either basaltic or serpentinite composition.Based on initial boundary conditions and present tectonic elements in the Tamayo fault zone, a possible history of the mouth of the Gulf of California is outlined. The median ridge was emplaced starting approximately 0.8 m.y. ago by regional extension across the transform fault, the result of leaky transform faulting. The diapirs occur along a possible relay zone of extension midway along the fault which began approximately 0.15 m.y. ago. The extension in this case is parallel to the trend of the transform fault, is still occurring at present, and may evolve into a true spreading center.Contribution of the Scripps Institution of Oceanography, new series.     

Geophysical evidence of mud diapirism on the Mediterranean Ridge accretionary complex

Mud volcanoes, mud cones, and mud ridges have been identified on the inner portion of the crestal area, and possibly on the inner escarpment, of the Mediterranean Ridge accretionary complex. Four areas containing one or more mud diapirs have been investigated through bathymetric profiling, single channel seismic reflection profiling, heat flow measurements, and coring. A sequence of events is identified in the evolution of the mud diapirs: initially the expulsion on the seafloor of gasrich mud produces a seafloor depression outlined in the seismic record by downward dip of the host sediment reflectors towards the mud conduit; subsequent eruptions of fluid mud may create a flat topped mud volcano with step-like profile; finally, the intrusion of viscous mud produces a mud cone.The origin of the diapirs is deep within the Mediterranean Ridge. Although a minimum depth of about 400 m below the seafloor has been computed from the hydrostatic balance between the diapiric sediments and the host sediments, a maximum depth, suggested by geometric considerations, ranges between 5.3 and 7 km. The presence of thermogenic gas in the diapiric sediments suggests a better constrained origin depth of at least 2.2 km.The heat flow measured within the Olimpi mud diapir field and along a transect orthogonal to the diapiric field is low, ranging between 16 ± 5 and 41 ± 6 mW m^–2. Due to the presence of gas, the thermal conductivity of the diapiric sediments is lower than that of the host hemipelagic oozes (0.6–0.9 and 1.0–1.15 W m^–1 K^–1 respectively).We consider the distribution of mud diapirs to be controlled by the presence of tectonic features such as reverse faults or thrusts (inner escarpment) that develop where the thickness of the Late Miocene evaporites appears to be minimum. An upward migration through time of the position of the décollement within the stratigraphic column from the Upper Oligocene (diapiric sediments) to the Upper Miocene (present position) is identified.     

红海及亚丁湾间之海水交换

分析表观耗氧量、滴定碱度及总二氧化碳量等资料来研判红海及亚丁湾间之海水交换。结果显示,红海深层水的方解石及霰石饱和度均比亚丁湾和阿拉伯海深层水的饱和度高。红海全水柱之方解石和霰石都处於过饱和状态,亚丁湾和阿拉伯海中各深度之方解石亦呈过饱和状态,但霰石的饱和探度则大约在500m左右。分析深层水之生物体无机碳与有机碳的分解比值,可以发现此地区深层水中,大约有25％的总二氧化碳增加量是由无机碳酸钙溶解而来。     

Evidence for gas accumulation associated with diapirism and gas hydrates at the head of the Cape Fear Slide

Single-channel seismic reflection profiles show evidence for areas of significant gas accumulation at the head of the Cape Fear Slide on the continental rise off North Carolina. Gas accumulation appears to occur beneath a gas hydrate seal in landward-dipping strata and in domed strata associated with diapirism. In addition, gas venting may have occurred near diapirs located at the head of the slide.     

Vibrations of a simply supported plate carrying an elastically mounted concentrated mass

A large number of papers and technical reports are available on the technically important problem of structural elements executing transverse vibrations and carrying concentrated masses. In general it is assumed that the attachment is perfectly rigid. On the other hand, a rather limited amount of published work is available when the mass is elastically connected to the structure. The system then exhibits a more complex behavior than in the case of rigid attachment. The present study deals with the solution of the title problem using the well-known normal mode, sinusoidal eigenfunction expansions.     

Validation of a finite difference method for the simulation of vortex-induced vibrations on a circular cylinder

The Karman Vortex Street generated by a circular cylinder is investigated by the numerical solution of the compressible Navier–Stokes equations in the incompressible Mach number range (Mach<0.3) using the Beam and Warming implicit scheme. The agreement with the fully incompressible projection method (Chorin, 1968) is fairly good while convergence time is very much better. The investigation suggests that the compressible Navier–Stokes equations may be used as an efficient alternative to study incompressible flows as well. Mach numbers just below 0.3 are enough to simulate incompressible flow behavior and at the same time do not cause numerical ill-conditioning in the solution. In addition, some relevant features of the vortices generated and carried by the wake of the cylinder could be fairly well captured.