Nd:YAG纳秒激光诱导硅表面微结构的演化

利用Nd:YAG纳秒激光(波长为532和355 nm)对单晶硅在真空中进行了累积脉冲辐照,研究了表面微结构的演化情况.在激光辐照的初始阶段,532和355 nm激光脉冲均在硅表面诱导出了波纹结构,后者辐照硅表面后形成了近似同心但稍显混乱的环形波纹结构.随着脉冲数的增加,波纹结构逐渐演化为一种类似珠形的凹凸结构,最后形成准规则排列的微米量级锥形结构,该微结构的生长依赖于表面张力波和结构自组织.分析发现,形成的交叉环形结构主要是在355 nm激光辐照硅的过程中,表面张力波导致波纹结构部分叠加的结果.     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

现浇薄壁管桩复合地基非线性有限元分析

现浇薄壁管桩是处理大面积软土地基的一项新技术,目前已在沿海软土地区高速公路建设中得到了一定的应用,但其产生的时间较短,开展的研究相对较少,利用Plaxis岩土工程有限元软件对现浇薄壁管桩（PCC桩）的工作特性、荷载传递规律及其影响因素、加固机理等方面进行了详细的分析,结果表明,桩外壁摩阻力随桩深近乎呈线性分布,桩内壁摩擦力只在桩下端一定长度内有所发挥,桩芯土体具有较好的闭塞效应,研究成果具有较大的指导意义.     

这幅图上的月相画错了

初中课本“我国领土东西部的晨昏差异”这一幅附图，通过北京时间6点钟时“帕米尔高原”和“乌苏里扛上”的景理比较．说明我国领土的广阔性。     

地震道的非线性混沌反演——Ⅰ.理论和数值试验

全文以地震道反演的数值实验为例,根据混沌理论讨论了非线性地震反演的以下特性:1.对于带误差的地震数据和极其平滑的初始模型,逐次线性化的迭代过程产生的输出序列最终走向无序,这是非线性反演系统本身的特性决定的;2.迭代（非线性反演）系统是由Poin-care映的或系统方程描述的;3.可以根据地震反问题的特点,用多种不同的方法定义相应的Lyapunov指数,它们的数值和组合是非线性反演系统状态的有效指示;4.取决于系统参数的选取,发现在二维相空间有奇异吸引子的对应物.总之,从混沌理论的角度来研究纯数学的非线性地震反问题,可以揭示某些过去鲜为人知的内在规律性.本文为全文的上篇,主要讨论前两个问题,即理论和地震道反演数值试验结果.     

华北地区一次对流激发重力波的卫星观测和数值模拟研究

对流激发的重力波能够向中层大气输送动量和能量,准确获取重力波主要特征对于研究中层大气的动力学和热力学结构非常重要。本文利用COSMIC(constellation observing system for meteorology,ionosphere and climate)资料,结合中尺度数值预报模式WRF(weather research and forecasting),对2010年8月4日发生在华北地区上空的一次对流激发的重力波事件进行分析。结果表明：此次事件激发的重力波在平流层以中低频重力波为主,且在平流层中垂直波长、水平波长分别为9～11 km和650～800 km,约62%的动量聚集在15～25 km高度的低平流层。在对流活动发生期间,低平流层重力波势能密度一直维持较大数值,而上平流层重力波势能密度则在对流减弱后迅速减小,且伴随着下一次对流活动的出现再次迅速增大。平流层不同高度上重力波势能密度对对流活动的响应主要与对流发展高度和背景风场有关,当对流发展较浅时,其激发的重力波在低层西风中易耗散;当对流发展较深到16 km甚至更高时,其激发的重力波接近零风层,并在东风中迅速上...     

降水调匀旱涝范围小 台风登陆华南受灾重

降水调匀　旱涝范围小　台风登陆　华南受灾重－１９９５年８月－杨冰洁（国家气候中心，北京１０００８１）８月份．全国人部地区降水比较调匀．月降水量北方大部地区正常或偏多，进一步缓解了西北和华北地区的旱情，仅局部地区发生旱涝灾害；南方人部正常或偏少，伙旱范...     

地理信息全息显示技术探讨

全息技术是当前最为重要的显示技术,它与地理信息可视化相结合将为地理信息数据表达提供一种全新的方式。本文通过研究全息显示的基本原理,论证了地理信息全息显示的可行性,并设计了相应的系统软硬件构成。     

在卸荷产生拉剪情况下裂隙岩体的力学行为

据岩体在卸荷情况下的拉剪应力状态,确定了节理岩体的线弹性断裂力学模型。依照此模型,可以得到相对远离裂隙(该位置的点到裂隙中心的距离比裂缝长度大)且受裂隙影响区域内应力、应变和变形方程。这些对评估裂隙岩石变形有重要的参考意义。通过用理论方程的计算结果和卸荷情况下试验观测所得的数据对比,证明该模型应用于实际工程中具有可行性。