Chemical composition and physical properties of lithium-iron micas from the Krušné hory Mts. (Erzgebirge)

Compositions of natural lithium-iron micas are approximated best by the sidero-phyllite-polylithionite join. These micas contain little or no magnesium and manganese. Their octahedral sheets contain close to two trivalent cations (mainly aluminum) in small crystallographic sites and a variable quantity of lithium and R⁺² (mainly iron) in large sites. Octahedral vacancies are situated mostly in large sites. Lithium and R⁺² approach a 44 replacement relationship in micas with octahedral occupancy close to six. Lithium and fluorine show a good positive correlation (small excess of fluorine over lithium), which indicates a crystallochemical association between them. There is a less distinct positive correlation between lithium and R⁺⁴.Based on simplifications, a calculation shows that about two-thirds of octahedral vacancies are caused by substitutions within the octahedral sheet, one-third, by tetrahedral substitutions. Different methods of calculating the crystallochemical formula yield slightly different numbers of octahedral vacancies, but do not affect the mica's position in plots of physical parameters against composition. If a crystallochemical formula is calculated from analysis of a mica contaminated with quartz, topaz, or feldspar, the apparent number of octahedral vacancies increases; such a formula exhibits unusual behavior in composition plots.     

Germanium in Icelandic geothermal systems

Germanium concentrations in geothermal waters in Iceland lie mostly in the range 2–30 ppb. There is an overall positive relation between the germanium content of the water and its temperature. Most of the germanium occurs as Ge(OH)^?₅in solution but Ge(OH)₄ may also be present in significant amounts in saline waters when above 200°C. Evidence indicates that aqueous germanium concentrations are controlled by exchange reactions where it substitutes for silica in silicates and iron in sulphides. It is the rate of dissolution and the relative abundance of the alteration minerals which take up germanium to a variable extent that ultimately fix Ge(OH)₄ concentrations in the water. This, together with water pH, fixes total dissolved germanium. It is mostly the primary rock composition that dictates the relative abundance of the alteration minerals. Conductive cooling in upflow zones favours removal of germanium from solution. During the initial stages of boiling of rising hot water dissolution is enhanced but precipitation at later stages.Thermodynamic data of various aqueous germanium species and several minerals are summarized and dissociation constants and solubilities estimated at elevated temperatures using available predictive methods.     

Biomarker distributions as indicators for the depositional environment of lacustrine sediments in the Valjevo-Mionica basin (Serbia)

In this study, the molecular composition and biomarker distribution of lacustrine sediments from Val-1 drillhole in the central zone of the western part of the Valjevo-Mionica basin were investigated at depth interval of 0–400 m. Former investigations have shown that the core material can be separated into six depth intervals based on bulk geochemical, mineralogical and sedimentological characteristics. Concerning the quality of organic matter, presence of specific minerals, and high salinity and anoxicity, or alkalinity, three zones are of highest interest, defined at depth intervals of 15–75 m (A), 75–200 m (B) and 360–400 m (F). The first aim of the study was to identify which biomarkers characterize these specific intervals. The second aim, addressing the transitions zones of these intervals, was to extend the changes in the characteristics of the organic substance, to reflect the changes of conditions in the depositional environment as well as to define biomarker parameters which are the most sensitive sedimentological indicators.The sediments from the hypersaline anoxic and alkaline environment show high contribution of algal precursor biomass, what is in accordance with the good quality of organic substances in the sediments from these zones. High squalane content and low content of regular isoprenoid C₂₅ are typical for hypersaline anoxic environment, whereas sediments from alkaline environment have high regular isoprenoid C₂₅ content.Transition to specific sedimentation zones is characterized by change in total organic matter content, and of both free and pyrolysis-derived, and change in hydrogen index value. In the biomarker distributions, more significant changes were detected in distributions of n-alkanes and isoprenoids, compared to polycyclic alkanes. The most intensive changes in alkane distribution are reflected in changes in n-C₁₇ content compared to n-C₂₇, and phytane compared to n-C₁₈. In addition, significant sensitivity was seen in ratios between squalane and n-alkane C₂₆ (hypersaline depositional environment), or isoprenoid C₂₅ and n-alkane C₂₂ for high alkalinity environment.This study showed that Sq/n-C₂₆ ratio can be used to assess the quality of organic substance in immature lacustrine sediments.     

Andalusite in granulites of the bohemian massif

Summary In granulites of South-Bohemia not only the usually occurring Al₂SiO₅ polymorphs, kyanite and sillimanite, were found but also andalusite. Its presence indicates that the metamorphic development of these granulites is characterized by a high PT-gradient. The granulitic rocks of the Bohemian Massif can be regarded as a facies series ranging from the granulite facies through the amphibolite facies to the hornblende-hornfels facies. The lower limit of the PT-conditions of this series should be placed below the position of the triple point of Al₂SiO₅.

---

Andalusit in Granuliten der Böhmischen Masse

Zusammenfassung In den Mineralparagenesen der südböhmischen Granulite wurde neben den üblicherweise auftretenden Al₂SiO₅-Modifikationen, Disthen und Sillimanit, auch Andalusit gefunden. Seine Anwesenheit weist darauf hin, daß die metamorphe Entwicklung der erwähnten Granulite durch einen ausgeprägten PT-Gradienten gekennzeichnet wurde. Die Granulitgesteine der Böhmischen Masse kann man als eine Faziesserie ansehen, die von der Granulitfazies über die Amphibolitfazies bis in die Hornblende-Hornfelsfazies reicht. Die untere Grenze der PT-Bedingungen dieser Serie ist unter die Lage des Tripelpunktes von Al₂SiO₅ zu setzen.

---

---

With 5 Figures     

Large to intermediate-scale aquifer heterogeneity in fine-grain dominated alluvial fans (Cenozoic As Pontes Basin,northwestern Spain): insight based on three-dimensional geostatistical reconstruction

Facies reconstructions are used in hydrogeology to improve the interpretation of aquifer permeability distribution. In the absence of sufficient data to define the heterogeneity due to geological processes, uncertainties in the distribution of aquifer hydrofacies and characteristics may appear. Geometric and geostatistical methods are used to understand and model aquifer hydrofacies distribution, providing models to improve comprehension and development of aquifers. However, these models require some input statistical parameters that can be difficult to infer from the study site. A three-dimensional reconstruction of a kilometer scale fine-grain dominated Cenozoic alluvial fan derived from more than 200 continuously cored, closely spaced, and regularly distributed wells is presented. The facies distributions were reconstructed using a genetic stratigraphic subdivision and a deterministic geostatistical algorithm. The reconstruction is only slightly affected by variations in the geostatistical input parameters because of the high-density data set. Analysis of the reconstruction allowed identification in the proximal to medial alluvial fan zones of several laterally extensive sand bodies with relatively higher permeability; these sand bodies were quantified in terms of volume, mean thickness, maximum area, and maximum equivalent diameter. These quantifications provide trends and geological scenarios for input statistical parameters to model aquifer systems in similar alluvial fan depositional settings.     

Partitioning,bioavailability and origin of heavy metals from the Nador Lagoon sediments (Morocco) as a basis for their management

Nador Lagoon sediments show low trace element concentrations, and, in relation to the lagoon geochemical baseline, only some anomalies for As, Cd, Cu and Pb in the NW of the lagoon deserve to be outstanding. The distribution of major, minor and trace elements in the lagoon allows a breakdown in four zones. Between “Beni Ensar” and “Atelouane” (zone A), a quite confined zone rich in organic matter and S, the most important trace-element anomalies (As, Cd, Co, Cu, Mn, Pb, Zn) were found, mainly around industry and old mining activities. In the surrounding of the city of Nador (zone B), the anomalies correspond to Mn, Cu and Zn. The coastal barrier and Kebdana channel (zone C) show moderately concentrations of Cd, Cr and Ni at specific sites. The less polluted area is the SE of the lagoon (zone D), with no outstanding anomaly. In lagoon sediments, metal bioavailability is very low. The metal partitioning patterns show that Cu, Pb and Zn present a low availability because they are bounded to the residual, non-mobile phases of the sediments. Only in some sites, the fraction was associated with organic matter, which could be liberated easily. Arsenic is concentrated in both the residual phases and the organic matter, the latter being more available. Cadmium is mainly concentrated in some samples in the interchangeable fraction, which could be considered as a potentially toxic element because it is easily released. Concerning the origin of these trace elements, those found in zone A correspond mostly to a natural source by weathering of mount Gourougou volcanic rocks (As, Co, Cu, Pb and Zn), and to an anthropogenic origin (Cd) owing to the presence of industry and old mines. In zone B, contributions of Cu and Zn enter the lagoon through soil weathering and river-borne, and as anthropogenic pollution from urban wastes. In zone C the most important pollutant is Cd deduced to be of anthropogenic origin from the close industry and intensive agriculture area. In spite of the intense socio-economic activities developed in the Nador Lagoon (agriculture, industry, fishing, tourism) trace element concentrations in the sediments are low and with scarce bioavailability. Only the NW sector is relativity polluted because of geogenic features.     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

Deep-seated gravitational slope deformations and their influence on consequent mass movements (case studies from the highest part of the Czech Carpathians)

Gravitational spreading of mountain ridges displays primary disequilibrium of flysch mountain areas of the Czech Carpathians. The progression of various types of mass movements is a product of long-term ridge disintegration and is predisposed by the geological structure of the area and the upper Tertiary-Quaternary morphogenesis of the mountain area. Deep-seated slope deformations are spatially interconnected by the occurrence of some other types of slope deformations (e.g. debris flows, debris slides, slumps, rock avalanches, etc.), which pose a considerable risk for the existence of human society. An important causative factor in these dynamically developing hazardous processes is, among other factors, the way in which land has been used in the last three centuries. Therefore, the occurrence of various types of slope deformations is studied in terms of their relation to deep-seated gravitational deformations and in terms of other limiting factors (structural geological, morphological and climatic factors, manmade impacts, etc.). The paper presents several case studies of slope deformations (Velká Čantoryje Mt, Lysá hora Mt, Ropice Mt and Smrk Mt) in the area of the Outer Carpathians within the territory of the Czech Republic and also adverts to some consequences in terms of the socioeconomic structure of the landscape.