FUZZY COMPREHENSIVE EVALUATION OF CONTAINER TRANSPORTATION MODES ALONG THE CHANGJIANG RIVER MAIN LINE AND ITS DELTA AREA

The Changjiang River (Yangtze) is one of the fastest growth areas of container transportation in Chi-na. Rail, road and water transportation have competed against each other for container transportation in the Chang-jiang River main line and its delta area. It is of significance to assess these different transportation modes scientifi-cally in order to organize container transportation efficiently in this area and make decision for integral plan and construction of transportation system in this area. This paper outlines application of fuzzy comprehensive evaluation to appraise different modes of typical direction of containers. Twelve assessment indexes were decided. Membership functions were formulated. Evaluation results indicated that road transportation was optimal mode in the Changjiang River delta area, however water transportation was the primary way in the Changjiang River main line.     

Extreme Flood Events over the Past 300 Years Inferred from Lake Sedimentary Grain Sizes in the Altay Mountains,Northwestern China

Understanding the temporal variations of extreme floods that occur in response to climate change is essential to anticipate the trends in flood magnitude and frequency in the context of global warming. However, long-term records of paleofloods in arid regions are scarce, thus preventing a thorough understanding of such events. In this study, a reconstruction of paleofloods over the past 300 years was conducted through an analysis of grain sizes from the sediments of Kanas Lake in the Altay Mountains of northwestern China. Results showed that grain parameters and frequency distributions can be used to infer possible abrupt environmental events within the lake sedimentary sequence, and two extreme flood events corresponding to ca. 1736–1765 AD and ca. 1890 AD were further identified based on canonical discriminant analysis(CDA) and coarse percentile versus median grain size(C-M) pattern analysis, both of which occurred during warmer and wetter climate conditions by referring to tree-ring records. These two flood events are also evidenced by lake sedimentary records in the Altay and Tianshan mountains. Furthermore, through a comparison with other records, the flood event from ca. 1736–1765 AD in the study region seems to have occurred in both the arid central Asia and the Alps in Europe, and thus may have been associated with changes in the North Atlantic Oscillation(NAO) index.     

Strength criterion for cross-anisotropic sand under general stress conditions

By incorporating the fabric effect and Lode’s angle dependence into the Mohr–Coulomb failure criterion, a strength criterion for cross-anisotropic sand under general stress conditions was proposed. The obtained criterion has only three material parameters which can be specified by conventional triaxial tests. The formula to calculate the friction angle under any loading direction and intermediate principal stress ratio condition was deduced, and the influence of the degree of the cross-anisotropy was quantified. The friction angles of sand in triaxial, true triaxial, and hollow cylinder torsional shear tests were obtained, and a parametric analysis was used to detect the varying characteristics. The friction angle becomes smaller when the major principal stress changes from perpendicular to parallel to the bedding plane. The loading direction and intermediate principal stress ratio are unrelated in true triaxial tests, and their influences on the friction angle can be well captured by the proposed criterion. In hollow cylinder torsional shear tests with the same internal and external pressures, the loading direction and intermediate principal stress ratio are related. This property results in a lower friction angle in the hollow cylinder torsional shear test than that in the true triaxial test under the same intermediate principal stress ratio condition. By comparing the calculated friction angle with the experimental results under various loading conditions (e.g., triaxial, true triaxial, and hollow cylinder torsional shear test), the proposed criterion was verified to be able to characterize the shear strength of cross-anisotropic sand under general stress conditions.     

Recent increase in surface fCO<Subscript>2</Subscript> in the western subtropical North Pacific

We observed unusually high levels (> 440 μatm) of carbon dioxide fugacity (fCO₂) in surface seawater in the western subtropical North Pacific, the area where Subtropical Mode Water is formed, during summer 2015. The NOAA Kuroshio Extension Observatory moored buoy located in this region also measured high CO₂ values, up to 500 μatm during this period. These high sea surface fCO₂ (fCO_2SW) values are explained by much higher normalized total dissolved inorganic carbon and slightly higher normalized total alkalinity concentrations in this region compared to the equatorial Pacific. Moreover, these values are much higher than the climatological CO₂ values, even considering increasing atmospheric CO₂, indicating a recent large increase in sea surface CO₂ concentrations. A large seasonal change in sea surface temperature contributed to higher surface fCO_2SW in the summer of 2015.     

Update earthquake risk assessment in Cairo,Egypt

The Cairo earthquake (12 October 1992; m _b  = 5.8) is still and after 25 years one of the most painful events and is dug into the Egyptians memory. This is not due to the strength of the earthquake but due to the accompanied losses and damages (561 dead; 10,000 injured and 3000 families lost their homes). Nowadays, the most frequent and important question that should rise is “what if this earthquake is repeated today.” In this study, we simulate the same size earthquake (12 October 1992) ground motion shaking and the consequent social-economic impacts in terms of losses and damages. Seismic hazard, earthquake catalogs, soil types, demographics, and building inventories were integrated into HAZUS-MH to produce a sound earthquake risk assessment for Cairo including economic and social losses. Generally, the earthquake risk assessment clearly indicates that “the losses and damages may be increased twice or three times” in Cairo compared to the 1992 earthquake. The earthquake risk profile reveals that five districts (Al-Sahel, El Basateen, Dar El-Salam, Gharb, and Madinat Nasr sharq) lie in high seismic risks, and three districts (Manshiyat Naser, El-Waily, and Wassat (center)) are in low seismic risk level. Moreover, the building damage estimations reflect that Gharb is the highest vulnerable district. The analysis shows that the Cairo urban area faces high risk. Deteriorating buildings and infrastructure make the city particularly vulnerable to earthquake risks. For instance, more than 90 % of the estimated buildings damages are concentrated within the most densely populated (El Basateen, Dar El-Salam, Gharb, and Madinat Nasr Gharb) districts. Moreover, about 75 % of casualties are in the same districts. Actually, an earthquake risk assessment for Cairo represents a crucial application of the HAZUS earthquake loss estimation model for risk management. Finally, for mitigation, risk reduction, and to improve the seismic performance of structures and assure life safety and collapse prevention in future earthquakes, a five-step road map has been purposed.     

Influence of magnetic effect,anisotropy, irregularity,initial stress and heterogeneity on propagation of SH-wave in an irregular pre-stressed magnetoelastic monoclinic sandwiched layer

Monoclinic materials viz. quartz, lithium niobate and lithium tantalate are among the most abundant materials, finding numerous applications throughout the technological world. Moreover, the presence of irregularity, initial stresses, anisotropy and heterogeneity in a material medium is obvious. These facts motivate the study of magnetoelastic SH-wave propagation in an irregular monoclinic sandwiched layer between a heterogeneous isotropic layer and an isotropic half space, all under initial stress. The heterogeneity in the uppermost layer is caused due to exponential variation in rigidity, density and initial stress in terms of space variable pointing vertically downward. The dispersion relation has been obtained using first-order perturbation technique. The substantial effect of wave number, anisotropy, irregularity, width ratio of the layers, horizontal compressive/tensile initial stresses, heterogeneity and monoclinic-magnetoelastic coupling parameter associated with sandwiched layer on phase velocity of SH-wave has been studied and depicted by means of graph. Comparative study made for the case when pre-stressed irregular sandwiched layer is monoclinic-magnetoelastic to the case when it is isotropic magnetoelastic layer is one of the major highlights of the current study.     

Roughness control on hydraulic conductivity in fractured rocks

The influence of joint roughness on the typologies of fluid flow inside fractures is well known and, thanks to experiences in the field of hydraulics, it has been studied from both a physical and mathematical point of view. Nevertheless, the formulations adopted by traditional hydraulic models are hardly applicable in the geological field, because of the difficulty encountered in the roughness parameter estimation. Normally this parameter can be estimated using the joint roughness coefficient (JRC), which considers both the asperity height and its regularity and directional trend. The main advantage in using the JRC arises from the fact that it can easily be obtained from geological-technical surveys and from comparison with the standard Barton profiles. Some relationships have been built up that allow for the estimation of the hydraulic conductivity tensor (an essential parameter for understanding water flow in fractured rock masses), not only as a function of traditional parameters like aperture, spacing, dip and dip direction, etc., but also of joint roughness, precisely expressed in terms of the roughness coefficient. These relationships have been studied initially from a theoretical point of view and then practically, through laboratory investigations.

---

Resumen  Se conoce muy bien la influencia de la rugosidad de las grietas en las tipologías del flujo de fluidos a lo interior de las fracturas y gracias a las experiencias en el campo de hidráulica ha sido posible estudiarla desde puntos de vista matemáticos y físicos. Sin embargo, las formulaciones adoptadas por los modelos hidráulicos tradicionales tienen poca aplicabilidad en el campo geológico debido a la dificultad relacionada con la estimación del parámetro de rugosidad. Normalmente este parámetro puede estimarse usando el coeficiente de rugosidad de grieta (JRC) el cual considera tanto la altura de la aspereza como su regularidad y tendencia direccional. La principal ventaja de utilizar el JRC se deriva del hecho que puede obtenerse fácilmente de levantamientos técnico-geológicos y de la comparación con los perfiles Standard Barton. Se han construido algunas relaciones que permiten la estimación del tensor de conductividad hidráulica (un parámetro esencial para el entendimiento del flujo de agua en masas de roca fracturadas), no solo en función de parámetros tradicionales como apertura, espaciado, buzamiento y dirección de buzamiento, etc., sino también en función de la rugosidad de la grieta estimada con precisión en términos del coeficiente de rugosidad. Estas relaciones se han estudiado inicialmente desde un punto de vista teórico y luego de modo práctico a través de investigaciones de laboratorio.

---

Résumé  L’influence de la rugosité des joints sur les types d’écoulement de fluide dans les fractures est bien connue et a été étudiée aussi bien du point de vue physique que mathématique grace à des expériences menées dans le domaine de l’hydraulique. Cependant les formulations adoptées dans les modèles hydrauliques traditionnels sont difficilement applicables dans le domaine de la géologie à cause de la difficulté rencontrée pour estimer la rugosité. Ce paramètre peut normalement être apprécié grace au coefficient de rugosité du joint (JRC), lequel prend en compte à la fois la hauteur de l’aspérité ainsi que sa régularité et sa direction. Le principal avantage dans l’utilisation du JRC réside dans le fait qu’il peut facilement être obtenu à partir d’études techniques-géologiques et par comparaison avec la classification de Barton. Des relations qui permettent une estimation du tenseur de conductivité hydraulique (un paramètre essentiel pour comprendre l’écoulement de l’eau dans les masses rocheuses fracturées) ont été élaborées, pas seulement en fonction de paramètres traditionnels tels que l’ouverture, l’espacement, l’inclinaison et la direction d’inclinaison, etc , mais aussi en prenant en compte la rugosité des joints à travers le coefficient de rugosité. Ces relations ont initialement été étudiées d’un point de vue théorique puis expérimentalement à travers des recherches en laboratoire.

     

柴北缘鱼卡地区中侏罗统石门沟组含煤层段沉积有机相分析

柴达木盆地北缘鱼卡地区中侏罗统石门沟组含煤段中发育有油页岩、煤、碳质泥岩和泥岩等富有机质细粒沉积.为了研究其沉积有机相的类型及煤和油页岩形成的控制因素,本文通过岩心观察、工业分析结合有机地球化学测试分析等方法将含煤段细粒沉积物划分为了类型A(三角洲平原沉积环境)、B(三角洲前缘-浅湖沉积环境)、C1(湖沼非油页岩亚相)及C2(湖沼油页岩亚相)四种类型,其中类型C1沉积物中发育煤,类型C2中发育油页岩,且煤较油页岩具有更高的含油率、水分、挥发分以及发热量值.有机质类型特征方面,沉积有机相类型A、B及C1沉积物有机质类型均为Ⅱ2-Ⅲ型、有机质来源均以陆源和混合来源两种有机质来源为主,而类型C2中主要为Ⅱ2型,以混合有机质来源为主;类型A及C2其沉积物有机质均处于未成熟阶段,而类型B和C1中有机质均处于未成熟-低成熟阶段;有机质保存条件方面,类型A沉积物主要形成于缺氧的淡水环境,类型B主要形成于贫氧-缺氧的淡水-半咸水环境,类型C1形成于贫氧-缺氧的淡水-半咸水环境,而类型C2则主要形成于缺氧的淡水-半咸水环境.其中类型B较类型A,类型C2较类型C1,其沉积物均形成于更为还原且盐度更高的水体环境中.石门沟组含煤段是煤和油页岩的形成层位,稳定的沉积环境、丰富的湖泊有机质来源、良好的保存条件及较少的陆源碎屑的稀释共同促进了类型C2中油页岩的形成,而丰富的陆源植物供给及良好的保存条件则促进了类型C1中煤层的形成.     

Ambient pressure thermal desorption spectroscopy (AP-TDS) of NiO/SiO2 catalysts

The Sabatier reaction is a key process in the “power-to-gas” application which is considered to contribute to future chemical energy storage systems. In this contribution we focus on the catalytic active sites of a NiO catalyst supported on SiO₂ (NiO/SiO₂) which is commonly used in the Sabatier reaction. A novel technique for the characterization of the active sites is presented and discussed using thermal desorption spectroscopy at ambient pressure. This analytical tool is operated under reaction conditions and allows element specific measurements during the catalytic process of CO₂ reforming towards methane. Beside the desorption experiments, XPS and XAS measurements of pristine and catalytically used samples are performed to determine the influence of the Sabatier reaction conditions on the surface structure of the catalyst.