Natural radioactivity of bricks and brick material in the Salihli-Turgutlu area of Turkey

Some of the rocks and soil-originated materials used in building construction are the serious natural radiation sources. Soil-originated bricks and roof-tiles and their raw material in the Salihli-Turgutlu area were tested in situ for natural radiation levels using a gamma-ray spectrometer. The concentrations of the radioelements ⁴⁰K, ²³⁸U and ²³²Th and air-absorbed radiation rates were measured for soil, raw material heaps, brick and roof-tile stacks and waste brick heaps. The radium-equivalent activity Ra_eq of the raw material varied between 187.9 and 216.4 Bq kg^?1. The external radiation hazard index H_ex values ranged between 0.51 and 0.58. For building material and its products, recommended Ra_eq and H_ex levels are 370 Bq kg^-1 and 1.0, respectively. On the other hand, both Ra_eq and H_ex values for waste brick heaps, containing broken brick pieces, coal pieces and ash, were higher than the recommended levels, i.e. Ra_eq values varied from 473.8 to 651.0 Bq kg^-1 and H_ex values were within the range 1.15–1.76. The annual dose rate and radium-equivalent activity values of the brick and roof-tiles were below the level of criteria. Annual dose rate ranged between 0.42 and 0.62 mSv y^?1 and radium equivalent activity was in the range 172.9–245.2 Bq kg^?1. The external and internal radiation hazard indices were all below the value of 1.0 for the Salihli-Turgutlu area bricks and roof-tiles. Results of this study were compared with results of previous studies. Natural radiation levels of construction raw material of study area are generally higher than of those of previous studies.     

Relatedness between contemporary and subfossil cladoceran assemblages in Turkish lakes

Cladocerans are valuable indicators of environmental change in lakes. Their fossils provide information on past changes in lake environments. However, few studies have quantitatively examined the relationships between contemporary and sub-fossil cladoceran assemblages and no investigations are available from Mediterranean lakes where salinity, eutrophication and top-down control of large-bodied cladocerans are known to be important. Here we compared contemporary Cladocera assemblages, sampled in summer, from both littoral and pelagic zones, with their sub-fossil remains from surface sediment samples from 40 Turkish, mainly shallow, lakes. A total of 20 and 27 taxa were recorded in the contemporary and surface sediment samples, respectively. Procrustes rotation was applied to both the principal components analysis (PCA) and redundancy analysis (RDA) ordinations in order to explore the relationship between the cladoceran community and the environmental variables. Procrustes rotation analysis based on PCA showed a significant accord between both littoral and combined pelagic–littoral contemporary and sedimentary assemblages. RDA ordinations indicated that a similar proportion of variance was explained by environmental variation for the contemporary and fossil Cladocera data. Total phosphorus and salinity were significant explanatory variables for the contemporary assemblage, whereas salinity emerged as the only significant variable for the sedimentary assemblage. The residuals from the Procrustes rotation identified a number of lakes with a high degree of dissimilarity between modern and sub-fossil assemblages. Analysis showed that high salinity, deep water and high macrophyte abundance were linked to a lower accord between contemporary and sedimentary assemblages. This low accord was, generally the result of poor representation of some salinity tolerant, pelagic and macrophyte-associated taxa in the contemporary samples. This study provides further confirmation that there is a robust relationship between samples of modern cladoceran assemblages and their sedimentary remains. Thus, sub-fossil cladoceran assemblages from sediment cores can be used with confidence to track long-term changes in this environmentally sensitive group and in Mediterranean lakes, subjected to large inter-annual variation in water level, salinity and nutrients.     

Adsorption Kinetic and Equilibrium Studies on Removal of Lead(II) onto Glutamic Acid/Sepiolite

In this study, a modified method was used to increase the adsorption of lead ions from aqueous solutions by using modified clay mineral on the laboratory scale. Adsorption experiments have been carried out on the use of both thermal activated sepiolite (TAS) and their glutamate/sepiolite modification (GS) as adsorbents. The experimental data was analyzed using adsorption kinetic models (pseudo first‐ and second‐order equations). The pseudo second‐order kinetic model fitted well to the kinetic data (R² ≥ 0.99). Then, the Freundlich and Langmuir models were applied to describe the uptake of Pb(II) on GS and the Langmuir isotherm model agrees well with the equilibrium experimental data (R² ≥ 0.97). The maximum adsorption capacity was observed to be 128.205 mg/g by GS according to the Langmuir equation. Desorption efficiency of the GS was studied by the batch method using EDTA, HCl, and HNO₃ solutions. Desorption of 69.18, 74.55, and 80% of Pb(II) from GS was achieved with 0.1 M EDTA, 0.1 M HCl, and 0.1 M HNO₃ solutions, respectively. FTIR analysis suggests the importance of functional groups such as amino, hydroxyl, and carboxyl during Pb(II) removal. SEM observations demonstrated that an important interaction at the lead‐modified sepiolite interface occurred during the adsorption process. In addition, the thermodynamic constants was calculated that the values of the Gibbs free energy (ΔG*), enthalpy (ΔH*), and entropy (ΔS*) of modification were 86.79 kJ/mol, ?18.91 kJ/mol, and ?354.70 J/mol/K, respectively. The negative value of ΔH* shows exothermic nature of adsorption.     

A critical review of the Kibyra Fault (Burdur-Fethiye Shear Zone,SW Turkey)

The Kibyra Fault is considered as the most significant evidence about the existence of the NE–SW-striking left-lateral Burdur-Fethiye Fault Zone in the south-western Anatolia in previous studies. However, recent studies show that there is a shear regime, named the Burdur-Fethiye Shear Zone, dominated by normal and left-lateral oblique normal faults in this region. A large number of ancient cities lie on this zone and many of them have been damaged by ancient earthquakes. One of these ancient cities is the ancient city of Kibyra. Most of previous studies suggest the Kibyra Fault depending on the damage in the city. However, the closest fault is located on the western side of the city and the earthquake damage was most likely caused by ground shaking. In this study, the existence of the supposed Kibyra Fault is discussed by integrating field studies, geological maps, trench data, digital elevation model and geomorphological analysis. In conclusion, it is understood that there is no evidence directly indicating a 35-km-long left-lateral fault in this region. The aim of this study is to examine the existence of the Kibyra Fault, take a different approach to the active fault studies and emphasise the importance of active faults for socio-economic conditions.     

The evolution of the Cappadocia Geothermal Province,Anatolia (Turkey): geochemical and geochronological evidence

Cappadocia Geothermal Province (CGP), central Turkey, consists of nine individual geothermal regions controlled by active regional fault systems. This paper examines the age dating of alteration minerals and the geochemistry (trace elements and isotopes) of the alteration minerals and geothermal waters, to assess the evolution of CGP in relation to regional tectonics. Ar–Ar age data of jarosite and alunite show that the host rocks were exposed to oxidizing conditions near the Earth’s surface at about 5.30 Ma. Based on the δ¹⁸O–δD relationhip, water samples had a high altitude meteoric origin. The δ³⁴S values of jarosite and alunite indicate that water samples from the southern part of the study area reached the surface after circulation through volcanic rocks, while northern samples had traveled to the surface after interacting with evaporates at greater depths. REY (rare earth elements and yttrium) diagrams of alteration minerals (especially illite, jarosite and alunite) from rock samples, taken from the same locations as the water samples, display a similar REY pattern to water samples. This suggests that thermal fluids, which reached the surface along a fault zone and caused the mineral alteration in the past, had similar chemical composition to the current geothermal water. The geothermal conceptual model, which defines a volcanically heated reservoir and cap rocks, suggests there are no structural drawbacks to the use of the CGP geothermal system as a resource. However, fluid is insufficient to drive the geothermal system as a result of scanty supply of meteoric water due to evaporation significantly exceeding rainfall.     

Analyses of fault mechanisms and expansion of southwestern Anatolia since the late Miocene

Neotectonic field studies and detailed analyses of Neogene and Quaternary fault mechanisms in southwestern Anatolia enable us to recognize a succession of compressional and extensional events, and to characterize the direction of corresponding regional stresses. The three most important compressive phases occurred during the Miocene, and a much smaller one near the Plio-Quaternary boundary. The last one or two interrupted a widespread extension of much greater duration and amplitude. The whole tectonic evolution resembles that of the Aegean. The large extension by normal faulting is consistent with a minimum stress along a NNE-SSW average direction. It appears that this direction was N-S during the Pliocene and changed to NE-SW sometime during the Quaternary. This dominant NNE-SSW extension, which began during late Miocene or earliest Pliocene, was related to the development of the southwestern Anatolian graben system.     

Ammonite and inoceramid bivalve faunas from the Davutlar Formation of the Devrekani–Kastamonu area, northern Turkey, and their biostratigraphical significance

The ammonite and inoceramid bivalve faunas of the Davutlar Formation of the Devrekani–Kastamonu area in central-north Turkey, are described. The formation yields an ammonite assemblage of Pseudophyllites indra (Forbes, 1846), Pachydiscus (Pachydiscus) haldemsis (Schlüter, 1867), Pachydiscus (Pachydiscus) oldhami (Sharpe, 1855), Didymoceras binodosum (Kennedy and Cobban, 1993), Bostrychoceras polyplocum (Roemer, 1841) and Baculites alavensis Santamaria Zabala, 1996. The inoceramid assemblage is Cataceramus subcompressus (Meek and Hayden, 1862), Cataceramus goldfussianus (d'Orbigny, 1846), Platyceramus vanuxemi (Meek and Hayden, 1860), Cataceramus cf. mortoni (Meek, 1876), Cataceramus pteroides (Giers, 1964), Cataceramus aff. barabini (Morton, 1834), Platyceramus pierrensis (Walaszczyk et al., 2001), “Inoceramus” convexus Hall and Meek, 1856, Cordiceramus heberti (Fallot, 1885), “Inoceramus” tenuilineatus Hall and Meek, 1856, “Inoceramus” borilensis Jolkicev, 1962, as well as some forms with no or equivocal specific affiliation. Both ammonite and inoceramid faunas suggest an early Late Campanian age for the formation, most probably Bostrychoceras polyplocum and Didymoceras donezianum ammonite Zones / Cataceramus subcompressus and “Inoceramus” tenuilineatus inoceramid Zones. Both ammonite and inoceramid assemblages are well represented throughout the Euramerican biogeographical region.     

Accuracy and precision of network-based RTK techniques as a function of baseline distance and occupation time

Turkey established the TUSAGA-AKTIF CORS Network in May 2009. Network software and central server were updated in 2016. With this update, GLONASS message type was determined for Flächen Korrektur Parameter (FKP), Master Auxiliary Concept (MAC) and Virtual Reference Station (VRS) network-based real time kinematic (NRTK) techniques. A 64 bit central server and the Trimble Pivot Platform network software were also acquired with this update. To the best of our knowledge, there has not been a comprehensive accuracy and precision test of the new system yet. In this paper, we aimed to create empirical accuracy and precision model of FKP, MAC and VRS NRTK techniques of the updated system as a function of baseline distance and occupation time. It is intended that surveyors can perform mission planning according to the requirements of accuracy and precision using these models. Seven test points and two check points were chosen to conduct the experiment. The baseline lengths with respect to the closest continuously operating reference stations (CORS) station were determined as 5-20-40-50 km approximately. Three thousand epochs with 2-s sampling interval were obtained for northing, easting and ellipsoidal height coordinate components of NRTK techniques at each point. Assumed true coordinates of each test point were determined by static survey using the GAMIT/GLOBK scientific software. In terms of accuracy and precision, our results show that empirical accuracy model depends only on the occupation time while empirical precision model depends on both the baseline length with respect to the closest CORS station and the occupation time for each NRTK technique. The results indicate that estimated accuracy and precision models can be safely used for mission planning purposes.