Effects of wave-induced forcing on a circulation model of the North Sea

The effect of wind waves on water level and currents during two storms in the North Sea is investigated using a high-resolution Nucleus for European Modelling of the Ocean (NEMO) model forced with fluxes and fields from a high-resolution wave model. The additional terms accounting for wave-current interaction that are considered in this study are the Stokes-Coriolis force, the sea-state-dependent energy and momentum fluxes. The individual and collective role of these processes is quantified and the results are compared with a control run without wave effects as well as against current and water-level measurements from coastal stations. We find a better agreement with observations when the circulation model is forced by sea-state-dependent fluxes, especially in extreme events. The two extreme events, the storm Christian (25–27 October 2013), and about a month later, the storm Xaver (5–7 December 2013), induce different wave and surge conditions over the North Sea. Including the wave effects in the circulation model for the storm Xaver raises the modelled surge by more than 40 cm compared with the control run in the German Bight area. For the storm Christian, a difference of 20–30 cm in the surge level between the wave-forced and the stand-alone ocean model is found over the whole southern part of the North Sea. Moreover, the modelled vertical velocity profile fits the observations very well when the wave forcing is accounted for. The contribution of wave-induced forcing has been quantified indicating that this represents an important mechanism for improving water-level and current predictions.     

Chlorine,titanium and barium-rich biotites: factors controlling biotite composition and the implications for garnet-biotite geothermometry

Barium-, Cl- and Ti-rich biotite occurs together with garnet, plagioclase and amphibole within narrow shear zones in 1800 Ma old noritic granulites in the Flakstadøy Basic Complex, Lofoten, north Norway. The granulite facies assemblage, plagioclase, clinopyroxene, orthopyroxene, biotite and ilmenite, was replaced by an amphibolite facies mineral assemblage including Ba-, Cl- and Ti-rich biotite during ductile deformation. Biotite shows complex compositional variations with respect to the contents of Ba, K, Cl, Ti, Al, Fe, Mg and Si. There are correlations between Si, Al^IV, K, Ba and Cl and between Al^VI and Ti. Titanium and Cl are uncorrelated. The Fe and Mg are correlated to both Cl and Ti. Multivariate analysis shows that most of the compositional variation of biotite can be described by two exchange reactions. This indicates that most of the variation in biotite composition was controlled by two chemical variables of the system. The content of the first exchange component (Ti_1.0 Fe_0.6 Al _-1.1 ^VI Mg_-0.8) in biotite can be related to the original distribution of Ti-bearing minerals in the igneous protolith. The content of the second exchange component (Al _0.4 ^IV Fe_0.8 Ba_0.5 Cl_1.0 Si_-0.4 Mg_-1.0 K_-0.5 OH_-1.0) is related to compositional variations of an externally derived Ba- and Cl-bearing fluid in equilibrium with biotite.The initially low Cl-content of the externally derived fluid was increasing during bioite forming reactions, because OH was preferentially incorporated, relative to Cl, into biotite. Continued hydration/chloridisation reactions resulted in a gradual consumption of the free fluid phase, resulting in local fluid-absent conditions. The composition of biotite reflects the composition of the last fluid in equilibrium with the mineral, i.e. the composition of the fluid immediately before the grain boundaries were fluid-undersaturated. Thus, the variations in biotite composition reflect how the fluid was gradually consumed throughout the shear zone rock. The correlations between Fe, Mg, Ba, K and Cl can be attributed to differences between the structure of the crystal lattices and the sizes of the cation sites of OH-phlogopite and Cl-annite. The dependency of the Fe/Mg ratios of biotite on the Cl-and Ti-content has a strong effect on the Fe–Mg partitioning between biotite and garnet. The relationship between lnK_D, X _Ti ^Bt and X _Cl ^Bt can be expressed by the regression equation: lnK _D =-1.82+2.60X _Ti ^Bt +5.67X _Cl ^Bt     

Evaluating Uncertainties in Coronal Electron Temperature and Radial Speed Measurements Using a Simulation of the Bastille Day Eruption

Obtaining reliable measurements of plasma parameters in the Sun’s corona remains an important challenge for solar physics. We previously presented a method for producing maps of electron temperature and speed of the solar corona using K-corona brightness measurements made through four color filters in visible light, which were tested for their accuracies using models of a structured, yet steady corona. In this article we test the same technique using a coronal model of the Bastille Day (14 July 2000) coronal mass ejection, which also contains quiet areas and streamers. We use the coronal electron density, temperature, and flow speed contained in the model to determine two K-coronal brightness ratios at (410.3, 390.0 nm) and (423.3, 398.7 nm) along more than 4000 lines of sight. Now assuming that for real observations, the only information we have for each line of sight are these two K-coronal brightness ratios, we use a spherically symmetric model of the corona that contains no structures to interpret these two ratios for electron temperature and speed. We then compare the interpreted (or measured) values for each line of sight with the true values from the model at the plane of the sky for that same line of sight to determine the magnitude of the errors. We show that the measured values closely match the true values in quiet areas. However, in locations of coronal structures, the measured values are predictably underestimated or overestimated compared to the true values, but can nevertheless be used to determine the positions of the structures with respect to the plane of the sky, in front or behind. Based on our results, we propose that future white-light coronagraphs be equipped to image the corona using four color filters in order to routinely create coronal maps of electron density, temperature, and flow speed.     

The fate of moderately volatile elements in impact events—Lithium connection between the Ries sediments and central European tektites

Lithium abundances and isotope compositions are presented for a suite of sediments from the surroundings of the Ries Impact structure, paralleled by new Li data for central European tektites (moldavites) from several substrewn fields (South Bohemia, Moravia, Cheb Basin, Lusatia), including a specimen from the newly discovered substrewn field in Poland. The data set was supplemented by three clay fractions isolated from sedimentary samples. Moldavites measured in this study show a very narrow range in δ⁷Li values (?0.6 to 0.3‰ relative to L‐SVEC) and Li contents (23.9–48.1 ppm). This contrasts with sediments from the Ries area which show remarkable range in Li isotope compositions (from ?6.9 to 13.4‰) and Li contents (0.6–256 ppm). The OSM sediments which, based on chemical similarity, formed the major part of moldavites, show a range in δ⁷Li values from ?2.0 to 7.9‰ and Li contents from 5.8 to 78.9 ppm. Therefore, the formation of moldavites was apparently accompanied by large‐scale mixing, paralleled by chemical and isotope homogenization of their parent matter. The proposed Li mixing model indicates that sands, clayey sediments, and low volumes of carbonates are the major components for tektite formation whereas residual paleokarst sediments could have been a minor but important component for a subset of moldavites. Striking homogenization of Li in tektites, combined with limited Li loss during impacts, may suggest that moderately volatile elements are not scavenged and isotopically fractionated during large‐scale collisions, which is consistent with recent models. In general, whether homogenization of bodies with distinct Li isotope systematics takes place, or collision of bodies with similar Li systematics operates cannot be resolved at present stage but Li isotope homogeneity of solar system planets and asteroidal bodies tentatively implies the latter.     

The extremely reduced silicate‐bearing iron meteorite Northwest Africa 6583: Implications on the variety of the impact melt rocks of the IAB‐complex parent body

Northwest Africa (NWA) 6583 is a silicate‐bearing iron meteorite with Ni = 18 wt%. The oxygen isotope composition of the silicates (?′¹⁷O = ?0.439 ‰) indicates a genetic link with the IAB‐complex. Other chemical, mineralogical, and textural features of NWA 6583 are consistent with classification as a new member of the IAB‐complex. However, some unique features, e.g., the low Au content (1.13 μg g^?1) and the extremely reducing conditions of formation (approximately ?3.5 ?IW), distinguish NWA 6583 from the known IAB‐complex irons and extend the properties of this group of meteorites. The chemical and textural features of NWA 6583 can be ascribed to a genesis by impact melting on a parent body of chondritic composition. This model is also consistent with one of the most recent models for the genesis of the IAB‐complex. Northwest Africa 6583 provides a further example of the wide lithological and mineralogical variety that impact melting could produce on the surface of a single asteroid, especially if characterized by an important compositional heterogeneity in space and time like a regolith.     

Some astrophysical consequences of the extended Maxwell-like gravitational field equations

The Maxwell-like gravitational field equations have been generalized and coupled through the gravitational four-potential on the electromagnetic Maxwell's equations. It is shown that this has several astrophysical consequences, of which the main are the following (i) the gravitational instability of a system of mass bodies manifesting itself by a Hubble-like motion on cosmological scales, (ii) the possible change of light intensity propagating through a large distance (and so a possible change of the real energy output of some very distant objects, e.g., quasars), (iii) non-stability of a planetary system on the cosmological time scales, due to the momentum increase of the moving bodies in a generalized gravitational field.     

Reconnection of a Kinking Flux Rope Triggering the Ejection of a Microwave and Hard X-Ray Source II. Numerical Modeling

Numerical simulations of the helical (m=1) kink instability of an arched, line-tied flux rope demonstrate that the helical deformation enforces reconnection between the legs of the rope if modes with two helical turns are dominant as a result of high initial twist in the range Φ≳6π. Such a reconnection is complex, involving also the ambient field. In addition to breaking up the original rope, it can form a new, low-lying, less twisted flux rope. The new flux rope is pushed downward by the reconnection outflow, which typically forces it to break as well by reconnecting with the ambient field. The top part of the original rope, largely rooted in the sources of the ambient flux after the break-up, can fully erupt or be halted at low heights, producing a “failed eruption.” The helical current sheet associated with the instability is squeezed between the approaching legs, temporarily forming a double current sheet. The leg – leg reconnection proceeds at a high rate, producing sufficiently strong electric fields that it would be able to accelerate particles. It may also form plasmoids, or plasmoid-like structures, which trap energetic particles and propagate out of the reconnection region up to the top of the erupting flux rope along the helical current sheet. The kinking of a highly twisted flux rope involving leg – leg reconnection can explain key features of an eruptive but partially occulted solar flare on 18 April 2001, which ejected a relatively compact hard X-ray and microwave source and was associated with a fast coronal mass ejection.     

Longitudinal distribution of X-bremsstrahlung on the solar disc

In this paper, the dependence of the intensity of solar bremsstrahlung in the spectral range from 1–60 keV on heliographic longitude is investigated. Considering a flare mechanism, which assumes that the electrons move in a preferred direction in the course of their acceleration (according to the model of Takakura and Kai (1966) the electrons move parallel to the solar surface), we come to the conclusion that the maximum of the bremsstrahlung intensity is shifted with increasing electron velocity towards the direction of motion of electron beams. In the case of the Takakura and Kai flare mechanism, the slow electrons ( ), i.e. with small energies of 1–10 keV, reach the maximum of the bremsstrahlung intensity round the CM; for higher velocities ( ), i.e. for higher energies of 10–60 keV, the direction of the maximum is shifted away from the CM towards the disc limb. These theoretical conclusions were proved by experimental research conducted by means of satellites.     

The “Meteorite meter”: A handheld instrument for the combined measurement of magnetic susceptibility and electrical conductivity,with application to meteorite identification and classification

We developed a simple, handheld, and user-friendly magnetic susceptibility meter specialized for the identification of meteorites. The measurement is based on an LC resonance circuit. When provided with a rough estimate of the sample mass, the instrument displays directly the mass-normalized magnetic susceptibility expressed in logχ_m (with χ_m in 10⁻⁹ m³ kg⁻¹), a parameter that is widely used in the classification of meteorites. Moreover, the measurement of the impedance of the LC resonator provides a proxy of the electrical conductivity (C-index) that can be helpful to distinguish metal-bearing samples from magnetite-bearing samples. This C-index offers an additional diagnostic for the identification of meteorites. Our tests demonstrate that the precision and the accuracy of this instrument called “Meteorite meter” (MetMet) are sufficient to allow distinguishing most meteorites from most terrestrial rocks, for a minimum recommended sample mass of 5 g. The distinction of some meteorite groups is also possible, in particular the separation of the three ordinary chondrite groups. Meteorite hunters, collectors, and curators and non-specialists, including children, can use this instrument as a guidance in the identification and classification of meteorites. This kind of instrument has an immense advantage over the widely used testing of meteorites with magnets, as it does not affect the paleomagnetic records of meteorites that are highly valuable for scientists.     

Transient magnetic disturbances from solar flare explosions and associated pulsations of type IV radio bursts

We have proposed a mechanism of arise of transient magnetic disturbances from solar flare explosion which can lead to understanding of observed pulsations of type IV radio emission with period of 0.3–3.0 s. According to the proposed mechanism the pulsation activity of the radio emission results from MHD waves accompanying the expanding diamagnetic plasma produced by the explosive flare material.