Comparison of 2D versus 3D modeling approaches for the analysis of the concrete faced rock‐fill Cokal Dam

This paper's primary purpose is to compare the 2D and 3D analysis methodologies in investigating the performance of a concrete faced rock‐fill dams under dynamic loading conditions. The state of stress on the face plate was obtained in both cases using a total strain based crack model to predict the spreading of cracks on the plate and the corresponding crack widths. Results of the 2D and 3D analyses agree well. Although significantly more demanding, 3D analyses have the advantage of predicting the following: (i) the opening of the vertical construction joints; (ii) the cracking at the valley sides; and (iii) the crushing of the plate during the seismic action. During the earthquake loading, the cracking predicted at the base of the face plate after the impounding spread significantly towards the crest of the dam; however, the crack widths are obtained relatively small. Crushing of the face plates at the construction joints is the primary cause of the large scale cracking predicted on the face plate for high intensity earthquakes. Earthquake induced permanent deformation of the fill increases the compressive stresses on the face plate, thereby reducing the minute cracking on the plate. However, this effect also leads to significant increases in the residual openings at the construction joints and at the plinth level. Copyright © 2013 John Wiley & Sons, Ltd.     

Spatial variations of precursory seismic quiescence observed in recent years in the eastern part of Turkey

A statistical analysis is made for the eastern part of Turkey in the beginning of 2009 by studying the phenomenon of seismic quiescence as a potential precursor of the main shocks. The results produced four areas having seismic quiescence in the beginning of 2009. These areas are observed to be centered at 39.96°N–40.69°E (around A?kale, Erzurum), 39.36°N–39.74°E (around Ovac?k, Tunceli), 39.02°N–40.52°E (including Elaz?? and Bingöl), and 38.45°N–42.94°E (Van Lake). Based on the recent results showing 5 ± 1.5 years quiescence before the occurrence of an earthquake in this region, the future earthquake would be expected between 2009.5 and 2010.5. The future earthquake occurrence may reach 2012 if we consider the standard deviation of average seismic quiescence as ±1.5 years. We have found that the M _W = 6.0 Elaz?? earthquake on 8 March 2010, followed a seismic quiescence starting about 5 years before the main shock. Thus, special interest should be given to the other regions where the seismic quiescence is observed.     

Investigating Correlations and Variations of Air Pollutant Concentrations under Conditions of Rapid Industrialization – Kocaeli (1987–2009)

In this study, it was aimed to characterize temporal variations of air pollutants for determining contribution to pollution episodes and to obtain correlations between these pollutants. With this aim we used data analysis for measured sulfur dioxide (SO₂), particulate matter (PM, black fume and PM10), nitrogen oxides (NO_x), ozone (O₃), carbon monoxide (CO), methane (CH₄), and non‐methane hydrocarbons (NMHC) recorded in Kocaeli, one of the most industrilizated cities of Turkey. Pollutant concentrations were the results of continuous and semi‐automatic measurements. Semi‐automatic measurements of SO₂ and PM (black fume) were enclosing period from 1987 to 2008 whereas continuous monitoring of all pollutants included years of 2007–2009. In the first stage of the study daily, monthly, annual, and seasonal variations of pollution were researched. Annual average concentrations were compared with limits set by Air Quality Protection Regulation (AQPR), Air Quality Evaluation and Management Regulation (AQEMR), World Health Organization (WHO), European Union (EU), and National Ambient Air Quality Standards (USEPA). In the following stage relationships between pollutants such as NO₂–O₃, NO_x–CO, NO_x–NMHC, and NO_x–SO₂ were investigated and correlation coefficients were determined as 0.87, 0.56, 0.51, and 0.69, respectively. R² values of regression models developed from these correlations were 0.78, 0.56, 0.34, and 0.72, respectively. Vehicle density of the traffic was evaluated with NO_x–O₃ emissions and decrease was seen in NO_x emissions due to decreasing vehicle density at weekends whereas O₃ concentrations increased. These correlations enable prediction of the parameters that cannot be measured which is important for providing improvement in early warning systems.     

A parametric study on seakeeping assessment of fast ships in conceptual design stage

The paper presents an approach to investigate the effects of some parameters on seakeeping assessment of fast ships in conceptual design stage. Hull form parameters have been classified into two groups: main dimensions (L, B and T) and secondary form parameters (LCB and C_P). To demonstrate the approach a fast ship is redesigned as parent hull and alternative hull forms are generated by changing these parameters systematically. Some hull forms are selected related the geometric limits and seakeeping analyzes are here investigated and discussed. The obtained results are satisfactory for seakeeping predictions during the conceptual design stage.     

Splash detachment of sand particles under varying contact stress field of wind-driven raindrop impact

The effects of wind-driven rain (WDR) on sand detachment were studied under various raindrop obliquities. Results suggested a significant reduction in compressive stress on sand surfaces for a two-dimensional experimental set-up in a wind tunnel. During experiments, sand particles in splash cups were exposed to both wind-free rain (WFR) and WDR driven by horizontal winds of 6.4, 8.9 and 12.8 m s⁻¹ and rainfall intensities of 50, 60, 75 and 90-mm h⁻¹ to assess the sand detachment rate (D, in g m⁻² s⁻¹). The effects of sand moisture state (dry and wet) on the detachment of different-sized particles (0.20–0.50 and 0.50–2.00 mm, respectively) were also tested. Factorial analysis of variance showed that shear and compressive stress components evaluated by horizontal and vertical kinetic energy flux terms (KE_x and KE_y, respectively, in J m⁻² s⁻¹) along with their vector sum (KE_r, in J m⁻² s⁻¹) explained the variation in D. Neither sand size nor sand moisture was statistically significant alone although binary interactions of KE_r, KE_x and KE_y with the sand size and three-way interaction of KE_x, sand size and moisture were statistically significant. These results can be explained by size-dependent variation in sand compressibility and surface friction related to the total stress field developed by a given partition of shear and compressive stresses of wind-driven oblique raindrops (KE_x/KE_y). Further analysis of the variation of the unit sand detachment rate (D_u = D/KE_r = g J⁻¹) with rain inclination (α, in degrees) better revealed the effect of WDR obliquity on D_u that further changed with sand size class and moisture state. Finally, the difference in the resulting stress field differentiable by the oblique raindrop trajectories of the experiment over sand surface significantly affected the non-cohesive particle detachment rates, to some extent interacted with size-dependent compressibility and interface shear strength of sand grains.     

On the response of a turbulent coastal buoyant current to wind events: the case of the Western Adriatic Current

This numerical study focuses on the response of the Western Adriatic Current to wind forcing. The turbulent buoyant surface current is induced by the Po river outflow in the Adriatic Sea. Idealized and realistic wind conditions are considered by retaining the complex geomorphology of the middle Adriatic basin. In the absence of wind, the Adriatic Promontories force the current to separate from the coast and induce instabilities. Persistent 7-m s^− 1 downwelling favorable northwesterly winds thicken and narrow the current. Instabilities whose size is ~10 km develop but ultimately vanish, since there is not enough across-shore space to grow. On the contrary, 7-m s^− 1 upwelling favorable southeasterly winds thin and widen the current, and instabilities can grow to form mesoscale (~35 km) features. When realistic winds are considered, the same trends are observed, but the state of the sea set up by previous wind events also plays a crucial role. The turbulent regimes set up by different winds affect mixing and the WAC meridional transport. With downwelling winds, the transport is generally southward and mixing happens mostly between the fresher (S ≤ 38) salinity classes. With upwelling winds, the transport decreases and changes sign, and mixing mainly involves saltier (S > 38) waters. In all cases, mixing is enhanced when a finer 0.5-km horizontal resolution is employed.     

Evaluation of a recently proposed record selection and scaling procedure for low‐rise to mid‐rise reinforced concrete buildings and its use for probabilistic risk assessment studies

This paper evaluates a recent record selection and scaling procedure of the authors that can determine the probabilistic structural response of buildings behaving either in the elastic or post‐elastic range. This feature marks a significant strength on the procedure as the probabilistic structural response distribution conveys important information on probability‐based damage assessment. The paper presents case studies that show the utilization of the proposed record selection and scaling procedure as a tool for the estimation of damage states and derivation of site‐specific and region‐specific fragility functions. The method can be used to describe exceedance probabilities of damage limits under a certain target hazard level with known annual exceedance rate (via probabilistic seismic hazard assessment). Thus, the resulting fragility models can relate the seismicity of the region (or a site) with the resulting building performance in a more accurate manner. Under this context, this simple and computationally efficient record selection and scaling procedure can be benefitted significantly by probability‐based risk assessment methods that have started to be considered as indispensable for developing robust earthquake loss models. Copyright © 2013 John Wiley & Sons, Ltd.     

Pretreatment of Olive Oil Mill Wastewater by Two Different Applications of Fenton Oxidation Processes

The removal of chemical oxygen demand (COD) and phenol from olive oil mill wastewaters (OOMW) was investigated experimentally by using conventional Fenton (CFP) and Fenton type processes (FTP) with zero valent iron (ZVI). Different operational parameters such as initial pH, Fe²⁺, Fe⁰, and H₂O₂ concentrations were examined. Kinetic studies in terms of COD and phenol removals for both CFP and FTP were performed. The original pH value (4.6) of OOMW for CFP was found as the optimum pH. The determined optimum conditions are [Fe²⁺] = 1500 mg L^?1, [H₂O₂] = 1750 mg L^?1, and pH = 4.6 for CFP; [Fe⁰] = 2000 mg L^?1, [H₂O₂] = 2000 mg L^?1, and pH = 3 for FTP. 82.4% COD and 62% phenol removals were performed under the optimum conditions by CFP, while 82% COD and 63.4% phenol were removed by FTP. According to the results of kinetic studies, it was observed that COD and phenol were removed by FTP more rapidly, compared to CFP. Consequently, it was determined that both CFP and FTP were effective processes for the pretreatment of OOMW.