Time-Lapse Analysis of Methane Quantity in the Mary Lee Group of Coal Seams Using Filter-Based Multiple-Point Geostatistical Simulation

Coal seam degasification and its success are important for controlling methane, and thus for the health and safety of coal miners. During the course of degasification, properties of coal seams change. Thus, the changes in coal reservoir conditions and in-place gas content as well as methane emission potential into mines should be evaluated by examining time-dependent changes and the presence of major heterogeneities and geological discontinuities in the field. In this work, time-lapsed reservoir and fluid storage properties of the New Castle coal seam, Mary Lee/Blue Creek seam, and Jagger seam of Black Warrior Basin, Alabama, were determined from gas and water production history matching and production forecasting of vertical degasification wellbores. These properties were combined with isotherm and other important data to compute gas-in-place (GIP) and its change with time at borehole locations. Time-lapsed training images (TIs) of GIP and GIP difference corresponding to each coal and date were generated by using these point-wise data and Voronoi decomposition on the TI grid, which included faults as discontinuities for expansion of Voronoi regions. Filter-based multiple-point geostatistical simulations, which were preferred in this study due to anisotropies and discontinuities in the area, were used to predict time-lapsed GIP distributions within the study area. Performed simulations were used for mapping spatial time-lapsed methane quantities as well as their uncertainties within the study area. The systematic approach presented in this paper is the first time in literature that history matching, TIs of GIPs and filter simulations are used for degasification performance evaluation and for assessing GIP for mining safety. Results from this study showed that using production history matching of coalbed methane wells to determine time-lapsed reservoir data could be used to compute spatial GIP and representative GIP TIs generated through Voronoi decomposition. Furthermore, performing filter simulations using point-wise data and TIs could be used to predict methane quantity in coal seams subjected to degasification. During the course of the study, it was shown that the material balance of gas produced by wellbores and the GIP reductions in coal seams predicted using filter simulations compared very well, showing the success of filter simulations for continuous variables in this case study. Quantitative results from filter simulations of GIP within the studied area briefly showed that GIP was reduced from an initial ～73 Bcf (median) to ～46 Bcf (2011), representing a 37 % decrease and varying spatially through degasification. It is forecasted that there will be an additional ～2 Bcf reduction in methane quantity between 2011 and 2015. This study and presented results showed that the applied methodology and utilized techniques can be used to map GIP and its change within coal seams after degasification, which can further be used for ventilation design for methane control in coal mines.     

Luminosity–colour relations for red clump stars

We calibrated the absolute magnitudes M _V , M _J , $M_{K_{s}}$ and M _g of red clump stars in terms of colours. M _V and M _g are strongly dependent on colour, while the dependence of M _J and $M_{K_{s}}$ on colour is rather weak. The calibration of the absolute magnitudes M _V and $M_{K_{s}}$ is tested on 101 RC stars in the field SA 141. The Galactic model parameters estimated with this sample are in good agreement with earlier studies.     

Relatedness between contemporary and subfossil cladoceran assemblages in Turkish lakes

Cladocerans are valuable indicators of environmental change in lakes. Their fossils provide information on past changes in lake environments. However, few studies have quantitatively examined the relationships between contemporary and sub-fossil cladoceran assemblages and no investigations are available from Mediterranean lakes where salinity, eutrophication and top-down control of large-bodied cladocerans are known to be important. Here we compared contemporary Cladocera assemblages, sampled in summer, from both littoral and pelagic zones, with their sub-fossil remains from surface sediment samples from 40 Turkish, mainly shallow, lakes. A total of 20 and 27 taxa were recorded in the contemporary and surface sediment samples, respectively. Procrustes rotation was applied to both the principal components analysis (PCA) and redundancy analysis (RDA) ordinations in order to explore the relationship between the cladoceran community and the environmental variables. Procrustes rotation analysis based on PCA showed a significant accord between both littoral and combined pelagic–littoral contemporary and sedimentary assemblages. RDA ordinations indicated that a similar proportion of variance was explained by environmental variation for the contemporary and fossil Cladocera data. Total phosphorus and salinity were significant explanatory variables for the contemporary assemblage, whereas salinity emerged as the only significant variable for the sedimentary assemblage. The residuals from the Procrustes rotation identified a number of lakes with a high degree of dissimilarity between modern and sub-fossil assemblages. Analysis showed that high salinity, deep water and high macrophyte abundance were linked to a lower accord between contemporary and sedimentary assemblages. This low accord was, generally the result of poor representation of some salinity tolerant, pelagic and macrophyte-associated taxa in the contemporary samples. This study provides further confirmation that there is a robust relationship between samples of modern cladoceran assemblages and their sedimentary remains. Thus, sub-fossil cladoceran assemblages from sediment cores can be used with confidence to track long-term changes in this environmentally sensitive group and in Mediterranean lakes, subjected to large inter-annual variation in water level, salinity and nutrients.     

Spatial Distribution of SO2, NO2, and O3 Concentrations in an Industrial City of Turkey Using a Passive Sampling Method

Ambient concentrations of sulfur dioxide (SO₂), nitrogen dioxide (NO₂), and ozone (O₃) were measured at 51 sampling points by passive sampling technique in Kocaeli, an important industrial city in Turkey. Samples were analyzed by UV‐spectrophotometry for NO₂ and O₃ and by ion chromatography for SO₂, respectively. Concentrations of SO₂, NO₂, and O₃ were determined to investigate their spatial distribution and source characterization. The sampling campaigns revealed an average concentration of 8 µg/m³ (max. 82 µg/m³) for SO₂, and 14 µg/m³ (max. 40 µg/m³) for NO₂, in summer; while average winter concentrations were 25 µg/m³ (max. 61 µg/m³) for SO₂, and 50 µg/m³ (max. 100 µg/m³) for NO₂. The maximum ozone concentrations were determined to be 86 µg/m³ in summer and 61 µg/m³ in winter downwind of the source areas of the precursor pollutant emissions. The results showed that NO₂ and SO₂ concentrations in industrial and urban areas were two to four times higher compared with rural areas in the summer and winter. In the light of the information obtained from the spatial interpolation of the pollutant concentrations, a selection of appropriate locations for continuous monitoring was suggested according to the European Community (EU) directives.     

Segregation and Urban Unrest in Sweden

In 2009, Sweden experienced a wave of urban unrest concentrated in areas with large foreign-born populations. This episode was seen by many as reflecting a trend towards increased ethnically based residential segregation, in line with scholarly literatures that correlate inequality and rising segregation with increases in unrest or rebellion. In this paper, we analyze the empirical connection between ethnic residential segregation and episodes of urban unrest in Sweden. Unrest is measured by the number of car burnings reported to police between 2002 and 2009. We find a positive and statistically significant link between residential segregation and car burnings at the scale of municipalities and metropolitan districts. Unrest/rebellion is also correlated with high proportion of young adults and social welfare assistance.     

Solutions for 4D cadastre – with a case study on utility networks

The increasing complexity and flexibility of modern land use requires that cadastres need to manage information on the third and temporal (fourth) dimension. This article considers the registration of legal space of utility networks in cadastre in this 3D + time (=4D) context. A requirement analysis in three countries that have methods to register utility networks complying with their legal, organizational and technical structure (Turkey, the Netherlands and Queensland, Australia) is the basis for three alternatives for 4D cadastre to register utility networks. The three alternatives are analysed with respect to legal, organizational and technical cadastral requirements. This article presents a case study and a prototype from the Netherlands. In this country by law utilities are considered to be real estate objects with obligatory registration of ownership and geometry. This study shows that the 3D space and separate temporal attributes approach (state-based model) is a very promising solution to maintain temporal changes of utility networks and that this approach is to be preferred above the current practice, where the 3D and temporal aspects are not considered when registering a network.     

Buddha from space—An ancient object of art made of a Chinga iron meteorite fragment*

Abstract– The fall of meteorites has been interpreted as divine messages by multitudinous cultures since prehistoric times, and meteorites are still adored as heavenly bodies. Stony meteorites were used to carve birds and other works of art; jewelry and knifes were produced of meteoritic iron for instance by the Inuit society. We here present an approximately 10.6 kg Buddhist sculpture (the “iron man”) made of an iron meteorite, which represents a particularity in religious art and meteorite science. The specific contents of the crucial main (Fe, Ni, Co) and trace (Cr, Ga, Ge) elements indicate an ataxitic iron meteorite with high Ni contents (approximately 16 wt%) and Co (approximately 0.6 wt%) that was used to produce the artifact. In addition, the platinum group elements (PGEs), as well as the internal PGE ratios, exhibit a meteoritic signature. The geochemical data of the meteorite generally match the element values known from fragments of the Chinga ataxite (ungrouped iron) meteorite strewn field discovered in 1913. The provenance of the meteorite as well as of the piece of art strongly points to the border region of eastern Siberia and Mongolia, accordingly. The sculpture possibly portrays the Buddhist god Vai?ravana and might originate in the Bon culture of the eleventh century. However, the ethnological and art historical details of the “iron man” sculpture, as well as the timing of the sculpturing, currently remain speculative.     

BV photometry of quadrupole system ET Bootis

In this study, we present the first Johnson BV photometry of the eclipsing binary star ET Bootis, which is member of a physically connected visual pair. Analysis of times of light minima enables us to calculate accurate ephemeris of the system via O–C analysis and observed an increase in period which we believe is a result of the light-time effect in the outer visual orbit. Secondly, we determined the total brightness and color of the system in light maxima and minima. Photometric solution of the system indicates that the contribution of the visual pair to the total light is about 40% in Johnson V band. Furthermore, photometric analysis shows that the primary star in the eclipsing binary has F8 spectral type while it confirms the G5 spectral type for the visual pair. Masses of the components in eclipsing binary are M₁ = 1.109 ± 0.014 M_⊙ and M₂ = 1.153 ± 0.011 M_⊙. Absolute radii of the components are R₁ = 1.444 ± 0.007 R_⊙ and R₂ = 1.153 ± 0.007 R_⊙. Physical properties of the components leads 176 ± 7 pc distance for the system and suggests an age of 6.5 billion years.     

Ground water radon anomalies in Bodrum Peninsula

Bodrum Peninsula is located between Hellenic Trench in the west and Gökova Fault Zone in the east which is affected by hundreds of earthquakes every year. Because of its active environment is allowed to monitor tracers/precursors continuously to analyse natural processes. This study focused on the determination of ground water radon (²²²Rn) concentrations in the Bodrum Peninsula in terms of seismic activities. Radon levels of ten ground water wells were measured periodically throughout the peninsula and these wells were divided into two groups according to the number of earthquakes they are exposed. Radon variations in second group stations are fairly significant as a result of high number of earthquakes. In these stations, radon continuously increased before the seismic storm and then decreased step by step. The results indicated that radon variations in ground waters of Bodrum Peninsula can be a good indicator for seismic storms instead of one specific event.