Problems of soil and groundwater pollution in the disposal of “marble” slurries in NW Sicily

This work deals with disposal of slurries generated during the cutting and polishing processes of slabs of decorative sedimentary carbonate rocks in the north western Sicily. At present, they are used as fillers of dismantled quarries near the sawmills and, as a final step of reclamation, are covered with earth layers. In spite of such inexpensive solution, there is lack of knowledge about the composition of the waste. In order to assess if there is any threat for the environment and to suggest indications for alternative solutions, such as recycling or inactivation processes, the slurries were analysed by XR diffraction, simultaneous thermal analysis, ICP/MS, ionic chromatography, FTIR, UV-Vis, COD and TOC measurements, grain size analysis. Results indicate that the slurries can threaten the groundwater, because of the high chemical oxygen demand; furthermore they can modify the mechanism of groundwater recharge, because of their grain size distribution. Some laboratory tests show that, even in very aggressive conditions, the solid pollutants persist in the waste and slowly release into water the products of their degradation. The slurry therefore should be subjected to inactivation treatment before disposal or, alternatively, recycled as secondary raw material for a suitable process.     

Zr/Hf ratio as an indicator of fractionation of rare-metal granites by the example of the Kukulbei complex,eastern Transbaikalia

The concept of granitic melt fractionation as the main process in the concentration of rare elements in granites calls for the development of a reliable method to determine the evolutionary sequences of granite series. We propose to use for this purpose a zirconium-hafnium indicator, the Zr/Hf weight ratio in granitic rocks (Zaraisky et al., 1999, 2000). By the example of three classic regions of rare-metal deposits, eastern Transbaikalia, central Kazakhstan, and Erzgebirge (Czech Republic and Germany), it was empirically shown that the Zr/Hf ratio of granites decreases during the fractional crystallization of granite magmas in the sequence granodiorite → biotite granite → leucogranite → lithium-fluorine granite. The reason is the higher affinity of Hf compared with Zr to a granite melt. This implies that the crystallization and settling of accessory zircon will cause the progressive enrichment of Hf relative to Zr in the residual melt. As a result, the Zr/Hf ratio decreases regularly in the series of sequential phases of granite intrusion related to a single magma chamber from granodiorite to biotite granite, leucogranite, and Li-F granite (from 45-30 to 10-2). Our experimental investigations supported the preferential enrichment of haplogranite melt in Hf and zircon crystals in equilibrium with melt in Zr (T= 800°C and P = 1 kbar). The Zr/Hf indicator was tested by the example of the wellknown Kukulbei rare-metal granite complex of eastern Transbaikalia (J3), which is unique in the degree of fractionation of initial granite melt with the formation of three phases of granite emplacement and vein derivatives. An important feature of the complex is its “short” differentiation trend. It was supposed that the granite magma of the first phase is parental, and the later phases forming small intrusive bodies in large massifs of biotite granites of the first phase are sequential products of its crystallization differentiation in a magma chamber. The biotite granites of the first phase are barren. The leucocratic granites of the second phase are accompanied by tin-tungsten greisen deposits (e.g., Spokoininskoe), and the upper part of cupola-like stocks of Li-F amazonite granites of the third phase host apogranite-type tantalum deposits (Orlovka, Etyka, and Achikan). In addition to three granite phases, the Kukulbei complex includes dikes of ongonites, elvans, amazonite granites, and chamber miarolitic pegmatites. All of the granitic rocks of the complex have similar isotopic ages of 142± 0.6 Ma. The Zr/Hf ratio decreases systematically from phase 1 (40–25), to phase 2 (20–10), and phase 3 (10–2). The ongonites, elvans, and pegmatites have similar Zr/Hf ratios (15-5), falling between the ranges of leucocratic muscovite granites and Li-F granites. Compared with other granite series, the granitic rocks of the Kukulbei complex show specific petrographic and geochemical features: they are strongly enriched in Rb, Li, Cs, Be, Sn, W, Mo, Ta, Nb, Bi, and F but depleted in Mg, Ca, Fe, Ti, P, Sr, Ba, V, Co, Ni, Cr, Zr, REE, and Y. From the early to late intrusion phases, the degree of enrichment and depletion in these element groups increases regularly. This is accompanied by a significant decrease (from 40 to 2) in Zr/Hf, which can be used as a reliable indicator of genetic relations, degree of fractionation, and rare-metal potential of granites. Granites with Zr/Hf values lower than 25 are promising for prospecting for Sn, W, Mo, and Be greisen deposits, whereas the formation of Ta deposits requires Zr/Hf values lower than 10.     

Age and tectonomagmatic setting of the Eocene Çöpler–Kabataş magmatic complex and porphyry-epithermal Au deposit, East Central Anatolia, Turkey

The Çöpler epithermal Au deposit and related subeconomic porphyry Cu–Au deposit is hosted by the middle Eocene Çöpler–Kabata? magmatic complex in central eastern Anatolia. The intrusive rocks of the complex were emplaced into Late Paleozoic–Mesozoic metamorphosed sedimentary basement rocks near the northeastern margin of the Tauride-Anatolide Block. Igneous biotite from two samples of the magmatic complex yielded ⁴⁰Ar/³⁹Ar plateau ages of 43.75?±?0.26 Ma and 44.19?±?0.23, whereas igneous hornblende from a third sample yielded a plateau age of 44.13?±?0.38. These ages closely overlap with ⁴⁰Ar/³⁹Ar ages of hydrothermal sericite (44.44?±?0.28 Ma) and biotite (43.84?±?0.26 Ma), and Re–Os ages from two molybdenite samples (44.6?±?0.2 and 43.9?±?0.2 Ma) suggesting a short-lived (<1 my) magmatic and hydrothermal history at Çöpler. No suitable minerals were found that could be used to date the epithermal system, but it is inferred to be close in age to the precursor porphyry system. The Çöpler–Kabata? intrusive rocks show I-type calc-alkaline affinities. Their normalized trace element patterns show enrichments in large ion lithophile and light rare earth elements and relative depletions in middle and heavy rare earth elements, resembling magmas generated in convergent margins. However, given its distance from the coeval Eocene Maden–Helete volcanic arc, the complex is interpreted to be formed in a back-arc setting, in response to Paleocene slab roll-back and upper-plate extension. The tectonomagmatic environment of porphyry-epithermal mineralization at Çöpler is comparable to some other isolated back-arc porphyry systems such as Bajo de la Alumbrera (Argentina) or Bingham Canyon (USA).     

Factors affecting the Nd3+ (REE3+) luminescence of minerals

In this paper, possibilities and limits of the application of REE³⁺ luminescence (especially the Nd^{3+ 4}F_3/2 → ⁴I_9/2 emission) as structural probe are evaluated. Important factors controlling the Nd³⁺ luminescence signal are discussed, including effects of the crystal-field, crystal orientation, structural state, and temperature. Particular attention was paid to the study of the accessory minerals zircon (ZrSiO₄), xenotime–(Y) (YPO₄), monazite–(Ce) (CePO₄) and their synthetic analogues. Based on these examples we review in short that (1) REE³⁺ luminescence can be used as non-destructive phase identification method, (2) the intensities of certain luminescence bands are strongly influenced by crystal orientation effects, and (3) increased widths of REE³⁺-related emission bands are a strong indicator for structural disorder. We discuss the potential of luminescence spectroscopy, complementary to Raman spectroscopy, for the quantitative estimation of chemical (and potentially also radiation-induced) disorder. For the latter, emissions of Nd³⁺-related centres are found to be promising candidates.     

Various filtering algorithms used to eliminate outliers in velocity time series obtained by ADVs (acoustic Doppler velocimeter)

The correct measurement of velocities in rivers is important for the true determination of discharge, erosion, scouring, and sediment transport processes. With the goal of increased accuracy, the use of acoustic Doppler velocimeters (ADVs) is increasing in hydrological measurements in rivers, lakes, and laboratories. ADVs are extensively used in the USA. ADVs have advantages when compared with classical measurement devices; however, one must be careful while using an ADV because their sampling approach creates a large number of extreme values by sending signals into the flow, measuring the velocities of particles moving with the water and assuming that these particles move with same velocity as the water. To calculate unbiased statistical properties, outliers must be removed from the time series. This study explains the methods used to filter velocity time series collected with ADVs and investigates the effects of these filters on the statistical characteristics of the filtered time series.     

Late pleistocene sedimentation history of the Shirshov Ridge, Bering Sea

The analysis of the lithology, grain-size distribution, clay minerals, and geochemistry of Upper Pleistocene sediments from the submarine Shirshov Ridge (Bering Sea) showed that the main source area was the Yukon-Tanana terrane of Central Alaska. The sedimentary materials were transported by the Yukon River through Beringia up to the shelf break, where they were entrained by a strong northwestward-flowing sea current. The lithological data revealed several pulses of ice-rafted debris deposition, roughly synchronous with Heinrich events, and periods of weaker bottom-current intensity. Based on the geochemical results, we distinguished intervals of an increase in paleoproductivity and extension of the oxygen minimum zone. The results suggest that there were three stages of deposition driven by glacioeustatic sea-level fluctuations and glacial cycles in Alaska.     

Cu- and Mn-bearing tourmalines from Brazil and Mozambique: crystal structures, chemistry and correlations

Cu- and Mn-bearing tourmalines from Brazil and Mozambique were characterised chemically (EMPA and LA-ICP-MS) and by X-ray single-crystal structure refinement. All these samples are rich in Al, Li and F (fluor-elbaite) and contain significant amounts of CuO (up to ~1.8 wt%) and MnO (up to ~3.5 wt%). Structurally investigated samples show a pronounced positive correlation between the <Y-O> distances and the (Li + Mn²⁺ + Cu + Fe²⁺) content (apfu) at this site with R ² = 0.90. An excellent negative correlation exists between the <Y-O> distances and the Al₂O₃ content (R ² = 0.94). The samples at each locality generally show a strong negative correlation between the X-site vacancies and the (MnO + FeO) content. The Mn content in these tourmalines depends on the availability of Mn, on the formation temperature, as well as on stereochemical constraints. Because of a very weak correlation between MnO and CuO we believe that the Cu content in tourmaline is essentially dependent on the availability of Cu and on stereochemical constraints.     

Petrogenesis of the ü?kap?l? Granitoid and its Mafic Enclaves in Elmal? Area (Ni?de, Central Anatolia, Turkey)

The Late Cretaceous ükapili Granitoid including mafic microgranular enclaves intruded into metapelitic and metabasic rocks, and overlain unconformably by Neogene ignimbrites in the Ni de area of Turkey. It is mostly granite and minor granodiorite in composition, whereas its enclaves are dominantly gabbro with a few diorites in composition. The ükapili Granitoid is composed mainly of quartz, K-feldspar, plagioclase, biotite, muscovite and minor amphibole while its enclaves contain mostly plagioclase, amphibole, minor pyroxene and biotite. The ükapili Granitoid has calcalkaline and peraluminous (A/CNK= 1.0-1.3) geochemical characteristics. It is characterized by high LILE/HFSE and LREE/HREE ratios ((La/Lu) N = 3-33), and has negative Ba, Ta, Nb and Eu anomalies, resembling those of collision granitoids. The ükapili Granitoid has relatively high 87Sr/86Sr (i) ratios (0.711189-0.716061) and low εNd (t) values (-5.13 to -7.13), confirming crustal melting. In contrast, the enclaves are tholeiitic and metaluminous, and slightly enriched in LILEs (K, Rb) and Th, and have negative Ta, Nb and Ti anomalies; propose that they were derived from a subduction-modified mantle source. Based on mineral and whole rock chemistry data, the ükapili granitoid is H-(hybrid) type, post-collision granitoid developed by mixing/mingling processes between crustal melts and mantle-derived mafic magmas.     

Hydrographic data modeling methods for determining precise seafloor topography

Acoustic and light detection and ranging are the recent methods used in hydrographical surveying. Depth values depending on X and Y horizontal coordinates are measured in both methods. While processing the hydrographical data, all data with different density are interpolated and modeled for determining the seafloor model using different interpolation techniques. In this study, effects of different surface modeling methods are investigated. Data obtained from single-beam echo sounder (SBES) are modeled using inverse distance, kriging, local polynomial, minimum curvature, moving average, nearest-neighbor, and Delaunay interpolation methods. Interpolation results are compared with the multibeam echo sounder data which were collected on the same area for determining the accuracy of modeling methods. Depending on the maximum total vertical uncertainty values in hydrographic survey standards, the best results were determined by using the kriging method. The Delaunay, minimum curvature, and inverse distance methods can be used for modeling the SBES data in shallow waters.     

The Berchtesgaden National Park (Bavaria, Germany): a platform for interdisciplinary catchment research

The Berchtesgaden National Park (Bavaria, Germany), a study site of the UNESCO Man and the Biosphere program in the catchment of Berchtesgadener Ache, is introduced as a platform for interdisciplinary research. As the investigation of how human activities affect the natural resources in the park area, which has been defined a main aim of the program, naturally requires expertise from different scientific fields, interdisciplinary research has been fostered in the national park plan since the very beginning of the Man and the Biosphere program in 1981. To analyze the complex interactions and mutual dependencies between socio-economic and natural systems, a variety of monitoring programs have been initialized in different disciplines (e.g. climate sciences, zoology, botany) that are addressed in this paper. As a result of these research efforts, the park offers a profound data basis to be used in future studies (e.g. land cover classifications, maps of geological and soil conditions). Detailed information is provided on a climate monitoring network that has been installed in the park starting in the year 1993. The network has been continuously extended over the years and now provides extraordinary comprehensive information on meteorological conditions in the park, setting the basis for current as well as for potential future climate-related studies. A special characteristic of the station network is the fact that it covers a large range of elevations from 600 m a.s.l in the valleys to 2,600 m a.s.l in the summit regions and is therefore able to capture altitudinal gradients in meteorological variables as typical for Alpine regions. Due to the large number of stations in high elevations (15 stations are in elevations higher than 1,500 m a.s.l) the network provides information on the complex hydrometeorological conditions in summit regions which are often insufficiently represented in observation networks due to the increased costs for maintenance of climate stations in these locations. Beside the various monitoring programs, a variety of numerical models have been (further) developed for application in the park area that make extensive use of the different data collected and therefore largely benefit from the comprehensive data pool. The potential and necessity of the climate monitoring network for modelling studies is demonstrated by utilizing the meteorological recordings in the framework of a hydrometeorological simulation experiment. Further examples of environmental modelling efforts are shortly described together with preliminary model results.