How does the Red Sea outflow water interact with Gulf of Aden Eddies?

As the Red Sea overflow water (RSOW) enters the Gulf of Aden (GOA), it interacts with a sequence of nearly barotropic, mesoscale eddies originating in the Indian Ocean. To investigate how these eddies impact the dispersal and eastward transport of the RSOW toward the Indian Ocean, a high resolution 3D regional model is employed to explore systematically the interaction between the RSOW and mesoscale eddies. Two types of experiments are conducted. In the first set, we simulate the behavior of RSOW in the presence of an idealized cyclone and an idealized anticyclone. The second type of simulation involves nesting of the regional model (ROMS) within a data-assimilating global model (HYCOM), in which a sequence of mesoscale eddies entering the Gulf of Aden is realistically captured. This simulation is integrated for one year, and includes a simple representation of the seasonality of the RSOW.Bower et al. (2002) suggest that the Red Sea overflow might be a western boundary undercurrent. Consistent with these expectations, the idealized simulations show that the preferred pathway of the RSOW in the absence of eddies is along the coast of Somalia (southern continental shelf) as a western boundary undercurrent. Simultaneously, a cyclonic circulation is generated in the far western GOA due to vortex stretching by the descending outflow. The presence of a cyclone in the western GOA increases the peak RSOW transport, but the cyclone itself rapidly loses its coherence after interacting with the rough topography in the western GOA. The presence of an anticyclone tends to block the preferred boundary pathway and inhibits the eastward transport of the RSOW. The eddies also result in substantially increased mixing of the RSOW in the western GOA.On the basis of the more realistic ROMS experiment, it is found that the modeled RSOW leaves the western part of the Gulf of Aden in short episodic bursts with transports that are an order of magnitude greater than that associated with the quasi-steady RSOW inflow into GOA. Such enhancement in RSOW transport is shown to be induced by cyclonic eddies that cause a rapid discharge of RSOW from the western part of the GOA. We conclude that mesoscale eddies play a key role in the transport and mixing of the RSOW within GOA.     

Cratering and penetration experiments in aluminum and teflon: Implications for space‐exposed surfaces

Abstract– Whether a target is penetrated or not during hypervelocity impact depends strongly on typical impactor dimensions (D_p) relative to the absolute target thickness (T). We have therefore conducted impact experiments in aluminum₁₁₀₀ and Teflon^FEP targets that systematically varied D_p/T (=D*), ranging from genuine cratering events in thick targets (D_p << T) to the nondisruptive passage of the impactor through very thin films (D_p >> T). The objectives were to (1) delineate the transition from cratering to penetration events, (2) characterize the diameter of the penetration hole (D_h) as a function of D*, and (3) determine the threshold target thickness that yields D_h = D_p. We employed spherical soda‐lime glass (SLG) projectiles of D_p = 50–3175 μm at impact velocities (V) from 1 to 7 km s^?1, and varied target thicknesses from microns to centimeters. The transition from cratering to penetration processes in thick targets forms a continuum in all morphologic aspects. The entrance side of the target resembles that of a standard crater even when the back of the target suffers substantial, physical perforations via spallation and plastic deformation. We thus suggest that the cratering‐to‐penetration transition does not occur when the target becomes physically perforated (i.e., at the “ballistic limit”), but when the shock pulse duration in the projectile (t_p) is identical to that in the target (t_t), i.e., t_p = t_t. This condition is readily calculated from equation‐of‐state data. As a consequence, in reconstructing impactor dimensions from observations of space‐exposed substrates, we recommend that crater size (D_c) be used for the case of t_p < t_t, and that penetration hole diameter (D_h) be used when t_p > t_t. The morphologic evolution of the penetration hole and its size also forms a continuum that strongly depends on both the scaled parameter D* and on V, but it is independent of the absolute scale. The condition of D_h = D_p is approached at D* > 50. The dependence of D_h on T and V, however, is very systematic. This has led to new and detailed calibration curves, permitting the reconstruction of D_p from the measurement of either crater diameter or penetration‐hole size in Al₁₁₀₀ and Teflon^FEP targets of arbitrary thickness. We also placed witness plates behind penetrated targets to intercept the down‐range debris plume, which is generally a mixture of both target and impactor fragments and melts. These witness plates also reveal that the debris plume systematically and diagnostically depends on D*. Thick targets shed spall debris only, and target thickness must be less than crater depth (T_c) to allow projectile material on the witness plate. Concentric plume patterns, accented by characteristic “hole saw” rings, characterize penetrated Al‐targets at D* = 1–10, but they give way to distinctly radial geometries at D* = 10–20. Most of the target debris occupies the periphery of the plume, while the projectile fragments or melts reside in its central parts. The periphery of the plume is also typically more fine‐grained than its center. At D* > 50, the exit plume is dominated by solid projectile fragments that progressively coagulate and overlap with each other, giving rise to compound craters. The latter have irregular crater interiors on account of the heterogeneous mass distribution of a collisionally produced, aggregate impactor. Similarly, complex craters are observed on LDEF and Stardust and they are produced by aggregate cosmic‐dust particles containing large, dense components within a relatively low‐density, fine‐grained matrix. The witness‐plate observations can also be used to address the enigmatic clustering of impact sites observed on Stardust’s aerogel and aluminum surfaces. We suggest that this clustering is difficult to produce by the collision of particles from comet Wild 2 with the Stardust spacecraft, and that it is more likely due to particle disaggregation in the comet’s coma.     

October 23, 2011 Turkey/Van–Ercis earthquake: structural damages in the residential buildings

On October 23, 2011, a magnitude of Mw 7.2 earthquake struck the Van province in eastern Turkey which caused approximately 600 life loss and 4,000 injured people. Although the recorded peak ground accelerations were relatively low (0.15–0.2 g) compared with that of other recent destructive Turkish earthquakes and the code-based design response spectrum, a large number of reinforced concrete buildings with 4–6 stories and non-engineered masonry buildings were either heavily damaged or collapsed in the region. Based on the post-earthquake technical inspections, the goal of this paper is to introduce major reasons for structural damages in the disaster area and to discuss these failures along with the approaches given in the design code which is renewed after August 17, 1999 Marmara Earthquake. Some remarkable lessons learned from earthquake-induced failures and damages specific to building construction techniques are presented in this paper.     

Spatial distribution of climatic conditions from the Middle Eocene to Late Miocene based on palynoflora in Central,Eastern and Western Anatolia

The continental climatic evolution of Anatolia has been reconstructed quantitatively for the last 45 million years using the coexistence approach. Although there were some regional effects, the Anatolian Cenozoic continental climate record correlated with the European climatic condition and the global oxygen isotope record from marine environments. From middle Eocene to late Miocene, continental warming in Anatolia was pronounced for inferred winter temperature and mean annual temperature as in Europe. Generally, the palaeoclimatic property of Anatolia resembles the European climatic changing and marine temperature changing based on the oxygen isotope record; however, climatic values of the terrestrial area in Anatolia are higher from Lutetian to Aquitanian and these values are lower than European values from Aquitanian to Tortonian. Correspondingly, Cenozoic climatic cooling in Anatolia is directly associated with an increase of seasonality, palaeogeographic position and terrestrial condition. Furthermore, mean annual precipitation values of Anatolia remained relatively stable during the Eocene–Oligocene; however, these values indicated changing throughout middle–late Miocene. Moreover, in this study, decline of abundance and variables for the mangrove and back mangrove palaeocommunities during the last 45 million years is recorded because of the decreasing of humidity, temperature and increasing of terrestrial condition.     

Complex basin evolution in the Gökova Gulf region: implications on the Late Cenozoic tectonics of southwest Turkey

Southwestern Turkey experienced a transition from crustal shortening to extension during Late Cenozoic, and evidence of this was recorded in four distinct basin types in the Mu?la–Gökova Gulf region. During the Oligocene–Early Miocene, the upper slices of the southerly moving Lycian Nappes turned into north-dipping normal faults due to the acceleration of gravity. The Kale–Tavas Basin developed as a piggyback basin along the fault plane on hanging wall blocks of these normal faults. During Middle Miocene, a shift had occurred from local extension to N–S compression/transpression, during which sediments in the Eskihisar–T?naz Basins were deposited in pull-apart regions of the Menderes Massif cover units, where nappe slices were already eroded. During the Late Miocene–Pliocene, a hiatus occurred from previous compressional/transpressional tectonism along intermountain basins and Yata?an Basin fills were deposited on Menderes Massif, Lycian Nappes, and on top of Oligo–Miocene sediments. Plio-Quaternary marked the activation of N–S extension and the development of the E–W-trending Mu?la–Gökova Grabens, co-genetic equivalents of which are common throughout western Anatolia. Thus, the tectonic evolution of the western Anotolia during late Cenozoic was shifting from compressional to extensional with a relaxation period, suggesting a non-uniform evolution.     

Relationship between Late Pleistocene sea‐level variations,carbonate platform morphology and aragonite production (Maldives,Indian Ocean)

A piston core from the Maldives carbonate platform was investigated for carbonate mineralogy, grain‐size distributions, calcium carbonate content and organic carbon. The sedimentary record was linked to Late Pleistocene sea‐level variations, using an age model based on oxygen isotopes obtained from planktonic foramanifera, nannofossil biostratigraphy and ¹⁴C age determinations. The correlation between the sedimentary record and Late Pleistocene sea‐level showed that variations in aragonite and mud during the past 150 000 years were clearly related to flooding and sea floor exposure of the main lagoons of the atolls of the Maldives carbonate platform. Platform flooding events were characterized by strongly increased deposition of aragonite and mud within the Inner Sea of the Maldives. Exposure events, in contrast, can be recognized by rapid decreases in the values of both proxy records. The results show that sediments on the Maldives carbonate platform contain a continuous record of Pleistocene sea‐level variations. These sediments may, therefore, contribute to a better understanding of regional and even global sea‐level changes, and yield new insights into the interplay between ocean currents and carbonate platform morphology.     

The Influence of Weathering on the Engineering Properties of Dunites

Weathering processes cause important changes in the engineering properties of rocks. In this study, dunites in the Bursa region in western Turkey were investigated and the changes in engineering properties due to weathering were evaluated. The studies were initiated with field observations including measurement of the characteristics of discontinuities such as spacing, aperture, fill material, roughness, and Schmidt hammer rebound value. Subsequently, laboratory studies were conducted in two stages. The first stage comprised mineralogical, petrographic, and chemical analyses. The second stage included physicomechanical tests to determine specific gravity, unit weights, water absorption, effective porosity, uniaxial compressive strength, P-wave velocity, and slake-durability index. According to these evaluations, the changes in engineering properties were determined to be mostly related to serpentinization at every stage of weathering. The most suitable parameters for characterizing the degree of weathering of the studied dunites are loss-on-ignition values, specific gravity, unit weight, water absorption, and effective porosity.     

Genetic algorithms for the classification and prediction of precipitation occurrence

Abstract

Using an approach similar to the biological processes of natural selection and evolution, the genetic algorithm (GA) is a nonconventional optimum search technique. Genetic algorithms have the ability to search large and complex decision spaces and handle nonconvexities. In this paper, the GA is applied for solving the optimum classification of rainy and non-rainy day occurrences based on vertical velocity, dewpoint depression, temperature and humidity data. The problem involves finding optimum classification based on known data, training the future prediction system and then making reliable predictions for rainfall occurrences which have significance in agricultural, transportation, water resources and tourism activities. Various statistical approaches require restrictive assumptions such as stationarity, homogeneity and normal probability distribution of the hydrological variables concerned. The GAs do not require any of these assumptions in their applications. The GA approach for the occurrence classifications and predictions is presented in steps and then the application of the methodology is shown for precipitation occurrence (non-occurrence) data. It has been shown that GAs give better results than classical approaches such as discriminant analysis. The application of the methodology is presented independently for the precipitation event occurrences and forecasting at the Lake Van station in eastern Turkey. Finally, the amounts of precipitation are predicted with a model similar to a third order Markov model whose parameters are estimated by the GA technique.     

Location Performance and Detection Threshold of the Spanish National Seismic Network

Spain is a low-to-moderate seismicity area with relatively low seismic hazard. However, several strong shallow earthquakes have shaken the country causing casualties and extensive damage. Regional seismicity is monitored and surveyed by means of the Spanish National Seismic Network, maintenance and control of which are entrusted to the Instituto Geográfico Nacional. This array currently comprises 120 seismic stations distributed throughout Spanish territory (mainland and islands). Basically, we are interested in checking the noise conditions, reliability, and seismic detection capability of the Spanish network by analyzing the background noise level affecting the array stations, errors in hypocentral location, and detection threshold, which provides knowledge about network performance. It also enables testing of the suitability of the velocity model used in the routine process of earthquake location. To perform this study we use a method that relies on P and S wave travel times, which are computed by simulation of seismic rays from virtual seismic sources placed at the nodes of a regular grid covering the study area. Given the characteristics of the seismicity of Spain, we drew maps for M _L magnitudes 2.0, 2.5, and 3.0, at a focal depth of 10 km and a confidence level 95 %. The results relate to the number of stations involved in the hypocentral location process, how these stations are distributed spatially, and the uncertainties of focal data (errors in origin time, longitude, latitude, and depth). To assess the extent to which principal seismogenic areas are well monitored by the network, we estimated the average error in the location of a seismic source from the semiaxes of the ellipsoid of confidence by calculating the radius of the equivalent sphere. Finally, the detection threshold was determined as the magnitude of the smallest seismic event detected at least by four stations. The northwest of the peninsula, the Pyrenees, especially the westernmost segment, the Betic Cordillera, and Tenerife Island are the best-monitored zones. Origin time and focal depth are data that are far from being constrained by regional events. The two Iberian areas with moderate seismicity and the highest seismic hazard, the Pyrenees and Betic Cordillera, and the northwestern quadrant of the peninsula, are the areas wherein the focus of an earthquake is determined with an approximate error of 3 km. For M _L 2.5 and M _L 3.0 this error is common for almost the whole peninsula and the Canary Islands. In general, errors in epicenter latitude and longitude are small for near-surface earthquakes, increasing gradually as the depth increases, but remaining close to 5 km even at a depth of 60 km. The hypocentral depth seems to be well constrained to a depth of 40 km beneath the zones with the highest density of stations, with an error of less than 5 km. The M _L magnitude detection threshold of the network is approximately 2.0 for most of Spain and still less, almost 1.0, for the western sector of the Pyrenean region and the Canary Islands.     

Förnyelse av äldre arbetsområden i Göteborg

Törnqvist, Anders: Förnyelse av äldre arbetsområden i Göteborg. Geografisk Tidsskrift 83: 60–64. May 1., 1983.

A recently started research and development project at Chalmers Institute of Technology in cooperation with the City of Gothenburg is presented. Background research on the physical and economic status of old industrial districts in Sweden shows the need for renewal. Difficulties and possibilities are analysed. A two-phase negotiation strategy involving the landowners, the firms, the employees and local government branches is outlined.