On the interest and the limits of using combined ESR/U-series model in the case of very late uranium uptake

Before ESR/U-series models were applied to ungulate teeth, it is generally assumed that calculated ages are close to the “real” ages when they range between the values obtained with the EU and LU models. When the samples show signs of uranium-leaching, a realistic mathematical modelling of the age is not possible. On the other hand, some samples have undergone a very late U-uptake “affecting” directly the U-series ages and rendering the calculated ages younger.

We present results obtained on two open-air sites, which show the limits of such combined models in the case of late uranium incorporation. For the Middle Pleistocene site of Isernia la Pineta (Italy), the ESR dates are expected to fall within the limits imposed by the Ar–Ar results. The other site, the Lower Palaeolithic deposits of Ambrona (Spain), yielded two sets of samples: some at the top of the sequence with uranium uptake ranging between EU and LU limits and thus giving a good idea of the “real” age of the site; others at the base displaying a very late U-uptake, which render an age determination difficult.     

Stress in the lithosphere: Inferences from steady state flow of rocks

Mechanical data and flow processes from steady state deformation experiments may be used to infer the state of stress in the lithosphere and asthenosphere. Extrapolations of flow equations to a representative geologic strain rate of 10^–14/sec. for halite, marble, quartzite, dolomite, dunite and enstatolite are now warranted because the steady state flow processes in the experiments are identical to those in rocks and because the geotherms are reasonably well established. More direct estimates are obtained from free dislocation densities, subgrain sizes and recrystallized grain sizes all of which are functions only of stress. Using the last of these techniques, we have estimated stress profiles as a function of depth from xenoliths in basalts and kimberlites, whose depths of equilibration were determined by pyroxene techniques, from four different areas of subcontinental and suboceanic upper mantle. The results are similar and indicate stress differences of about 200 to 300 bars at 40 to 50 km, decaying to a few tens of bars at depths betow 100 km. These stresses are reasonable and are in accord with extrapolations of the mechanical data provided that allowance is made for a general increase in strain rate and decrease in viscosity with depth.     

Precipitation water storage capacity in a temperate mixed oak–beech canopy

The storage capacity of a temperate mixed oak–beech stand was investigated as a function of stand density and species composition. Measurements were performed in selected zones delimited by three neighbouring trees. Three independent approaches were compared: (i) a spraying laboratory experiment to estimate the water storage on foliage before and after dripping; (ii) a mechanistic model describing rainfall partitioning within the forest canopy and providing estimates of foliage storage capacities; and (iii) linear regression analyses to evaluate the canopy (foliage + branches) storage capacity using the relationship between throughfall and rainfall. Good agreement was generally observed between the laboratory experiment and the mechanistic model estimates, while estimations from the regression method tended to exceed those from the other approaches. Storage capacity estimates ranged from 0·22 mm to 0·80 mm for pure oak zones, from 0·24 mm to 1·12 mm for mixed zones and from 0·53 mm to 1·17 mm for pure beech zones. The increase of storage capacity with increasing proportion of beech in the canopy resulted from higher beech LAI compared with oak. Similarly, for mixed and pure beech canopies, storage capacity was higher for high density zones than for low density zones as a result of the increase in LAI with increasing local basal area; in contrast, for pure oak, the storage capacity was not related to basal area because of the lower shade‐tolerance of this species compared with beech. Copyright © 2008 John Wiley & Sons, Ltd.     

The Monitor project: JW 380 – a 0.26-, 0.15-M⊙, pre-main-sequence eclipsing binary in the Orion nebula cluster

We present a general recipe for constructing N -body realizations of galaxies comprising near spherical and disc components. First, an exact spherical distribution function for the spheroids (halo and bulge) is determined, such that it is in equilibrium with the gravitational monopole of the disc components. Second, an N -body realization of this model is adapted to the full disc potential by growing the latter adiabatically from its monopole. Finally, the disc is sampled with particles drawn from an appropriate distribution function, avoiding local-Maxwellian approximations. We performed test simulations and find that the halo and bulge radial density profile very closely match their target model, while they become slightly oblate due to the added disc gravity. Our findings suggest that vertical thickening of the initially thin disc is caused predominantly by spiral and bar instabilities, which also result in a radial re-distribution of matter, rather than scattering off interloping massive halo particles.     

The 2013 Ibiza Calibration Campaign of Jason-2 and SARAL Altimeters

This study presents the results of the 2013 Ibiza (Western Mediterranean) calibration campaign of Jason-2 and SARAL altimeters. It took place from 14 to 16 September 2013 and comprised two phases: the calibration of the GNSS (Global Navigation Satellite System) buoys to estimate the antenna height of each of them and the absolute calibration to estimate the altimeter bias (i.e., the difference of sea level measured by radar altimetry and GNSS). The first one was achieved in the Ibiza harbor at a close vicinity of the Ibiza tide gauge and the second one was performed at ～ 40 km at the northwest of Ibiza Island at a crossover point of Jason-2 and SARAL nominal groundtracks. Five buoys were used to delineate the crossover region and their measurements interpolated at the exact location of each overflight. The overflights occurred two consecutive days: 15 and 16 September 2013 for Jason-2 and SARAL, respectively. The GNSS data were processed using precise point positioning technique. The biases found are of (?0.1 ± 0.9) and (?3.1 ± 1.5) cm for Jason-2 and SARAL, respectively.     

Protracted oogenesis and annual reproductive periodicity in the deep‐sea pennatulacean Halipteris finmarchica (Anthozoa,Octocorallia)

Halipteris finmarchica is one of the most common species of deep‐sea pennatulacean corals in the Northwest Atlantic; it was recently determined to act as a biogenic substrate for other species and as a nursery for fish larvae. Its reproductive cycle was investigated in colonies sampled in 2006 and 2007 along the continental slope of Newfoundland and Labrador (Canada). Halipteris finmarchica exhibits large oocytes (maximum diameter of 1000 μm), which are consistent with lecithotrophic larval development. Female potential fecundity based on mature oocytes just before spawning was ~6 oocytes · polyp^?1 (500–6300 oocytes · colony^?1); male potential fecundity was 16 spermatocysts · polyp^?1 (5500–57,400 spermatocysts · colony^?1). Based on statistical analysis of size‐probability frequency distributions, males harboured one cohort of spermatocysts that matured inside 8–11 months, whereas females harboured two distinct cohorts of oocytes; a persistent pool of small ones (≤400 μm) and a small number (~20%) of larger ones that grew from ~400 to >800 μm over a year. Despite this difference in the tempo of oogenesis and spermatogenesis, a synchronic annual spawning was detected. A latitudinal shift in the spawning period occurred from south (April in the Laurentian Channel) to north (May in Grand Banks and July–August in Labrador/Lower Arctic), following the development of the phytoplankton bloom (i.e. sinking of phytodetritus). Prolonged oogenesis with the simultaneous presence of different oocyte classes in a given polyp is likely not uncommon in deep‐sea octocorals and could hamper the detection of annual/seasonal reproduction when sample sizes are low and/or time series discontinued or brief.     

On type-I migration near opacity transitions. A generalized Lindblad torque formula for planetary population synthesis

We give an expression for the Lindblad torque acting on a low-mass planet embedded in a protoplanetary disk that is valid even at locations where the surface density or temperature profile cannot be approximated by a power law, such as an opacity transition. At such locations, the Lindblad torque is known to suffer strong deviation from its standard value, with potentially important implications for type I migration, but the full treatment of the tidal interaction is cumbersome and not well suited to models of planetary population synthesis. The expression that we propose retains the simplicity of the standard Lindblad torque formula and gives results that accurately reproduce those of numerical simulations, even at locations where the disk temperature undergoes abrupt changes. Our study is conducted by means of customized numerical simulations in the low-mass regime, in locally isothermal disks, and compared to linear torque estimates obtained by summing fully analytic torque estimates at each Lindblad resonance. The functional dependence of our modified Lindblad torque expression is suggested by an estimate of the shift of the Lindblad resonances that mostly contribute to the torque, in a disk with sharp gradients of temperature or surface density, while the numerical coefficients of the new terms are adjusted to seek agreement with numerics. As side results, we find that the vortensity related corotation torque undergoes a boost at an opacity transition that can counteract migration, and we find evidence from numerical simulations that the linear corotation torque has a non-negligible dependency upon the temperature gradient, in a locally isothermal disk.     

Meteorites at Meridiani Planum provide evidence for significant amounts of surface and near‐surface water on early Mars

Abstract– Six large iron meteorites have been discovered in the Meridiani Planum region of Mars by the Mars Exploration Rover Opportunity in a nearly 25 km‐long traverse. Herein, we review and synthesize the available data to propose that the discovery and characteristics of the six meteorites could be explained as the result of their impact into a soft and wet surface, sometime during the Noachian or the Hesperian, subsequently to be exposed at the Martian surface through differential erosion. As recorded by its sediments and chemical deposits, Meridiani has been interpreted to have undergone a watery past, including a shallow sea, a playa, an environment of fluctuating ground water, and/or an icy landscape. Meteorites could have been encased upon impact and/or subsequently buried, and kept underground for a long time, shielded from the atmosphere. The meteorites apparently underwent significant chemical weathering due to aqueous alteration, as indicated by cavernous features that suggest differential acidic corrosion removing less resistant material and softer inclusions. During the Amazonian, the almost complete disappearance of surface water and desiccation of the landscape, followed by induration of the sediments and subsequent differential erosion and degradation of Meridiani sediments, including at least 10–80 m of deflation in the last 3–3.5 Gy, would have exposed the buried meteorites. We conclude that the iron meteorites support the hypothesis that Mars once had a denser atmosphere and considerable amounts of water and/or water ice at and/or near the surface.