Robotic telescopes for high energy astrophysics in Ondřejov

We report on two small aperture robotic telescopes called BART and D50 operated in Ondřejov. Both telescopes are capable of automatic observation of gamma ray burst (GRB) optical afterglows. Coordinates of GRBs are taken from alerts distributed via Internet. Telescopes observe other interesting high energy sources when there is not any alert. The smaller telescope BART has aperture D = 254 mm. The bigger telescope D50 has a primary mirror of diameter D = 500 mm. Both telescopes are controlled by free software package RTS2 and are accessible through Internet. We describe the two telescopes and related software and show some results such as our first observed optical counterpart of GRB.     

Experimental constraints on ultrapotassic magmatism from the Bohemian Massif (durbachite series, Czech Republic)

The equilibrium phase relations of a mafic durbachite (53 wt.% SiO₂) from the Třebíč pluton, representative of the Variscan ultrapotassic magmatism of the Bohemian Massif (338–335 Ma), have been determined as a function of temperature (900–1,100°C), pressure (100–200 MPa), and H₂O activity (1.1–6.1 wt.% H₂O in the melt). Two oxygen fugacity ranges were investigated: close to the Ni–NiO (NNO) buffer and 2.6 log unit above NNO buffer (∆NNO + 2.6). At 1,100°C, olivine is the liquidus phase and co-crystallized with phlogopite and augite at 1,000°C for the whole range of investigated pressure and water content in the melt. At 900°C, the mineral assemblage consists of augite and phlogopite, whereas olivine is not stable. The stability field of both alkali feldspar and plagioclase is restricted to low pressure (100 MPa) at nearly water-saturated conditions (<3–4 wt.% H₂O) and T < 900°C. A comparison between experimental products and natural minerals indicates that mafic durbachites have a near-liquidus assemblage of olivine, augite, Ti-rich phlogopite, apatite and zircon, followed by alkali feldspar and plagioclase, similar to the mineral assemblage of minette magma. Natural amphibole, diopside and orthopyroxene were not reproduced experimentally and probably result from sub-solidus reactions, whereas biotite re-equilibrated at low temperature. The crystallization sequence olivine followed by phlogopite and augite reproduces the sequence inferred in many mica-lamprophyre rocks. The similar fractionation trends observed for durbachites and minettes indicate that mafic durbachites are probably the plutonic equivalents of minettes and that K- and Mg-rich magmas in the Bohemian Massif may have been generated from partial melting of a phlogopite–clinopyroxene-bearing metasomatized peridotite. Experimental melt compositions also suggest that felsic durbachites can be generated by simple fractionation of a more mafic parent and mixing with mantle-derived components at mid crustal pressures.     

Mineralogy and major-trace element geochemistry of the Haymana manganese mineralizations,Ankara, Turkey

The study area comprises Çayirli, Harapa?illari and Ortabel (ÇHO) districts in the Haymana town 25 km SW of the Ankara city. In this study, geologic setting, mineralogical and geochemical characteristics of manganese mineralizations are examined and their origin is discussed. Data were obtained from field observations, various polished and thin section determinations and chemical analyses of 25 ore samples. Major and trace element analyses were conducted with ICP-ES and ICP-MS methods at ACME Laboratories (Canada). ÇHO manganese ores are found in reddish radiolarites and partly interbedded marls of the Ankara ophiolitic melange of lower Cretaceous-upper Senonian age. In these extremely folded rocks, manganese is observed as band and lenses. All samples are composed of pyrolusite and quartz. Circular pyrolusites around the gangue form a ring texture and radiolarite ores yield spherical sections. In addition, breccia-like texture is observed between pyrolusite and quartz. Geologic setting, mineralogical and textural data indicate an exogene environment. Major and trace element abundances and correlation among them imply that ÇHO mineralizations are of hydrothermal origin and linked to the same source. Evaluation of all these data shows that ÇHO manganese mineralizations are of hydrothermal type sedimentary mineralization and they were deposited in distal part of the source.     

Origin,organic geochemistry,and estimation of the generation potential of Neogene lacustrine sediments from the Valjevo-Mionica Basin,Serbia

This paper reports an investigation of 60 samples of lacustrine sedimentary rocks of Neogene age lying at depths of 0–400 m in the Valjevo-Mionica Basin, Serbia. The goal of the study was to determine the origin and type of primary organic matter (OM), the degree of thermal alteration, the generation potential of OM from the rocks of this basin, and conditions in the sedimentation environment during the formation of the rocks. The potential of OM of the rocks was estimated on the basis of the thermolysis of a representative sample after its preliminary debituminization.     

Field evidences of secondary surface ruptures occurred during the 20 February 1956 Eskişehir earthquake in the NW Anatolia

Surface rupture and source fault of the 20 February 1956 Eskişehir earthquake have been a matter of debate that potentially contributes towards the understanding of the active deformation and seismic risk in the highly populated NW Anatolia. Field observations on the two fault segments (namely Kavacık and Uludere faults) in the north of the Eskişehir graben revealed evidences of co-seismic surface rupture and mass movements during the Eskişehir earthquake. Surface rupture was observed as a 2.5m wide, a 100m long and ca. 20 cm deep asymmetric depression in the Gümüşlü valley, 2 km east of the Uludere village. A trench dug on this depression confirms a prominent high-angle south dipping fault (dominantly left lateral strike slip) and two faint north-dipping antithetics as clear noticeable shear zones in organic-rich thick soil. Mass failures are particularly observed in spring depressions filled with loose torrent and carbonaceous material in front of the fault scarp. Some rock slides of several tens of meters in size that obviously require significantly high ground shaking were also developed on steep fault scarps. The orientation of the principal stress tensor as deduced from the surface rupture of the Eskişehir earthquake displays clear inconsistency with the geometry of prominent faults in the area. We concluded that this disagreement may be explained by a curved surface rupture. The western and eastern tips of this rupture are EW trending and the probable NW-running part in the middle would correspond to the bounding zone between two right-stepping faults.     

Late Ordovician climbing‐dune cross‐stratification: a signature of outburst floods in proglacial outwash environments?

Climbing dune‐scale cross‐statification is described from Late Ordovician paraglacial successions of the Murzuq Basin (SW Libya). This depositional facies is comprised of medium‐grained to coarse‐grained sandstones that typically involve 0·3 to 1 m high, 3 to 5 m in wavelength, asymmetrical laminations. Most often stoss‐depositional structures have been generated, with preservation of the topographies of formative bedforms. Climbing‐dune cross‐stratification related to the migration of lower‐flow regime dune trains is thus identified. Related architecture and facies sequences are described from two case studies: (i) erosion‐based sandstone sheets; and (ii) a deeply incised channel. The former characterized the distal outwash plain and the fluvial/subaqueous transition of related deltaic wedges, while the latter formed in an ice‐proximal segment of the outwash plain. In erosion‐based sand sheets, climbing‐dune cross‐stratification results from unconfined mouth‐bar deposition related to expanding, sediment‐laden flows entering a water body. Within incised channels, climbing‐dune cross‐stratification formed over eddy‐related side bars reflecting deposition under recirculating flow conditions generated at channel bends. Associated facies sequences record glacier outburst floods that occurred during early stages of deglaciation and were temporally and spatially linked with subglacial drainage events involving tunnel valleys. The primary control on the formation of climbing‐dune cross‐stratification is a combination between high‐magnitude flows and sediment supply limitations, which lead to the generation of sediment‐charged stream flows characterized by a significant, relatively coarse‐grained, sand‐sized suspension‐load concentration, with a virtual absence of very coarse to gravelly bedload. The high rate of coarse‐grained sand fallout in sediment‐laden flows following flow expansion throughout mouth bars or in eddy‐related side bars resulted in high rates of transfer of sands from suspension to the bed, net deposition on bedform stoss‐sides and generation of widespread climbing‐dune cross‐stratification. The later structure has no equivalent in the glacial record, either in the ancient or in the Quaternary literature, but analogues are recognized in some flood‐dominated depositional systems of foreland basins.     

Interpretation and modelling of regional gravity data of the Aveiro Basin (Northwest Portugal)

The gravity map of the Aveiro Basin, North West Portugal was produced in 2000/2001 and some limited two dimensional (2D) interpretation was carried out. It is intended in this article to advance the interpretation and modelling of the original Aveiro basin gravity data. Thus, the data were processed and the horizontal gradient, the second vertical derivative and downward continued field computed. The corresponding maps have been processed and a new interpretation of the basin tectonic features has been proposed. This is compared with the previous geological and tectonic information obtained from former surveys and local boreholes. As the next step a more detailed modelling of the Aveiro Basin took place. Bearing the interpretation of the basin tectonic features in mind, several north–south and east–west gravity profiles were established and modelled. The proposed models were presented and discussed. As a result, a comprehensive mass distribution model for the basin was proposed. Finally, comparison was made between the new gravity model and the previously published tectonic features map. This modelling is particularly useful for groundwater protection, exploration and exploitation and also for the dimensioning of drilling operations. Bearing in mind the geomorphology of the basin the gravity method is a very economical tool for the investigation of basin structures.     

Developing the ability to model acid-rock interactions and mineral dissolution during the RMA stimulation test performed at the Soultz-sous-Forêts EGS site,France

The Soultz Enhanced Geothermal System (EGS) reservoir's response to chemical stimulation is assessed by numerical simulation of coupled thermo-hydraulic-chemical processes. To assess chemical interactions between host rocks and a mixture of HCl and HF as well as its potential effects on the Soultz EGS reservoir, new modelling efforts using the FRACHEM code have been initiated. This article presents the model calibration and results. Simulations consider realistic conditions with available data sets from the EGS system at Soultz. Results indicate that the predicted amount of fracture sealing minerals dissolved by injection of a mixture of acids Regular Mud Acid (RMA) was consistent with the estimated amount from the test performed on GPK4 well at Soultz EGS site. Consequently reservoir porosity and permeability can be enhanced especially near the injection well by acidizing treatment.