Short‐lived radioactivity in the early solar system: The Super‐AGB star hypothesis

Abstract– The composition of the most primitive solar system condensates, such as calcium‐aluminum‐rich inclusions (CAIs) and micron‐sized corundum grains, show that short‐lived radionuclides (SLR), e.g., ²⁶Al, were present in the early solar system. Their abundances require a local or stellar origin, which, however, is far from being understood. We present for the first time the abundances of several SLR up to ⁶⁰Fe predicted from stars with initial mass in the range approximately 7–11 M_⊙. These stars evolve through core H, He, and C burning. After core C burning they go through a “Super”‐asymptotic giant branch (Super‐AGB) phase, with the H and He shells activated alternately, episodic thermal pulses in the He shell, a very hot temperature at the base of the convective envelope (approximately 10⁸ K), and strong stellar winds driving the H‐rich envelope into the surrounding interstellar medium. The final remnants of the evolution of Super‐AGB stars are mostly O–Ne white dwarfs. Our Super‐AGB models produce ²⁶Al/²⁷Al yield ratios approximately 0.02–0.26. These models can account for the canonical value of the ²⁶Al/²⁷Al ratio using dilutions with the solar nebula of the order of 1 part of Super‐AGB mass per several 10² to several 10³ of solar nebula mass, resulting in associated changes in the O‐isotope composition in the range Δ¹⁷O from 3 to 20‰. This is in agreement with observations of the O isotopic ratios in primitive solar system condensates, which do not carry the signature of a stellar polluter. The radionuclides ⁴¹Ca and ⁶⁰Fe are produced by neutron captures in Super‐AGB stars and their meteoritic abundances are also matched by some of our models, depending on the nuclear and stellar physics uncertainties as well as the meteoritic experimental data. We also expect and are currently investigating Super‐AGB production of SLR heavier than iron, such as ¹⁰⁷Pd.     

In-mine geoelectric investigations for detecting tectonic disturbances in coal seam structures

The methods of in-mine seam-sounding and transillumination (geoelectric tomography) for the detection of tectonic disturbances of coal seams were developed by the Department of Geophysics of the University of Miskolc in the 1970–80’s with the effective support of the former “Borsod” Coal Mines Ltd. The paper gives an overview about the theory of seam-sounding and a special geoelectric tomographic inversion, and introduces the in-mine geoelectric seam-sounding and transillumination measurement systems using vertical electrode dipoles. In the second part the paper, the results of an in-mine geoelectric measurement are presented, which was carried out in order to detect tectonic disturbances of the Miocene aged coal seams situated in Slovakia. As results of the geophysical investigation, the authors forecasted the tectonic features in the coal seam. The company confirmed the results by independent information about seam disturbances and tectonic features arising from the excavation of the investigated area.     

A sedimentary facies model for stepped,fluvial tufa systems in the Iberian Range (Spain): the Quaternary Piedra and Mesa valleys

Stratigraphic and sedimentological analyses of the Quaternary tufa and associated deposits in the Piedra and Mesa river valleys allowed a number of stages of their sedimentary evolution to be characterized, and a depositional sedimentary model for this north‐central sector of the Iberian Range (Spain) to be established. The proposed sedimentary facies model may explain tufa arrangements in other medium to high gradient, stepped, fluvial tufa systems with narrow transverse profiles occurring in temperate, semi‐arid areas, in both recent and past scenarios. There are several tufa deposits within the Piedra and Mesa river valleys that, over a maximum thickness of about 90 m, record one or more stages of tufa deposition produced following the fluvial incision of the bedrock or previous tufa deposits. Each depositional stage begins with coarse detrital sedimentation. Six fundamental, vertical sequences of tufa facies with small amounts of detrital material reveal the sedimentary processes that occurred in different fluvial environments: channel areas with: (i) free‐flowing water; (ii) barrages and/or cascades; and (iii) dammed water and palustrine floodplains. The proposed sedimentary model involves narrow, stepped, fluvial valleys in which tufa cascades were common. Alternating intervals of bryophyte and stromatolite facies commonly formed at some cascades. Many of these represented barrage‐cascade structures that consisted of phytoclast rudstones, thick phytoherms of mosses and associated stromatolites, and curtain‐shaped phytoherms of stems. Upstream of these structures, dammed areas with bioclastic sands and silts developed and palustrine vegetation grew. The channel stretches between barrages and/or cascades were loci for extensive stromatolite growth in fast flowing water. The palustrine floodplain was home to pools and drainage channels. The model also explains the growth of some barrages in the River Piedra that surpassed the height of the divide, with the diffluence of the main channel into a secondary course forming other tufa deposits in the area. The distribution and abundance of certain types of tufa facies in fluvial basins may be an indicator of differences in their gradients. The facies studied in this work suggest that the gradient of the ancient River Piedra was steeper than that of the ancient River Mesa. Assuming similar scenarios for climate and hydrology, the depositional settings mentioned above and their dimensions would have been determined mainly by the gradient and width of the associated river valleys. This sedimentary model may also be useful for inferring variations in other river basin slopes, as well as accounting for the presence of tufas in areas that normally have no permanent water input.     

Spatial management of small-scale fisheries on the west coast of Baja California Sur, Mexico

To understand small-scale fisheries in Mexico, the spatial and temporal distribution of the landed catch of several species was analyzed, including abalone, clams, snails, octopus, squids, lobsters, shrimps, blue crabs, sharks, rays and finfish along the 349 km of the Gulf of Ulloa coast. Data reported by fishers from 1998 to 2009 on catch volume and value per group of species and per fishing locality, together with the number of landing events, were used to define fishing zones and the relative importance of each fishery. Finfish turned out the primary fishery in the region, but the other fisheries showed relevant spatial changes that should be considered when establishing management goals and fishing regulations according to resource availability, fleet efficiency, processing capacity, commercialization of fishing products and profit distribution.     

Analytic Simulation of the Elastic Waves Propagation in the Neighborhood of Fluid Filled Wells with Monopole Sources

An analytic formulation to understand the scattering, diffraction and attenuation of elastic waves at the neighborhood of fluid filled wells is presented. An important, and not widely exploited, technique to carefully investigate the wave propagation in exploration wells is the logging of sonic waveforms. Fundamental decisions and production planning in petroleum reservoirs are made by interpretation of such recordings. Nowadays, geophysicists and engineers face problems related to the acquisition and interpretation under complex conditions associated with conducting open-hole measurements. A crucial problem that directly affects the response of sonic logs is the eccentricity of the measuring tool with respect to the center of the borehole. Even with the employment of centralizers, this simple variation, dramatically changes the physical conditions on the wave propagation around the well. Recent works in the numerical field reported advanced studies in modeling and simulation of acoustic wave propagation around wells, including complex heterogeneities and anisotropy. However, no analytical efforts have been made to formally understand the wireline sonic logging measurements acquired with borehole-eccentered tools. In this paper, the Graf’s addition theorem was used to describe monopole sources in terms of solutions of the wave equation. The formulation was developed from the three-dimensional discrete wave-number method in the frequency domain. The cylindrical Bessel functions of the third kind and order zero were re-derived to obtain a simplified set of equations projected into a bi-dimensional plane-space for displacements and stresses. This new and condensed analytic formulation allows the straightforward calculation of all converted modes and their visualization in the time domain via Fourier synthesis. The main aim was to obtain spectral surfaces of transfer functions and synthetic seismograms that might be useful to understand the wave motion produced by the eccentricity of the source and explain in detail the new arising borehole propagation modes. Finally, time histories and amplitude spectra for relevant examples are presented and the validation of time traces using the spectral element method is reported.     

Geomechanical model for a seismically active geothermal field: Insights from the Tinguiririca volcanic-hydrothermal system

In this work,we develop a multidisciplinary approach to investigate a geothermal system located at the volcanic arc of a subduction-related orogen and highlight the interplay between active tectonism.stress field and fluid migration.By using results of field investigations from the Tinguiririca geothermal field in the High Andes of Chile(35°S),empirical analysis,and numerical models of static stress variations,we proposed a geomechanical model for evaluating the distribution of hydrothermal manifestations in a seismically-active region.The present geomechanical model follows four major steps:(1) development of the 3 D structural model of fault pattern;(2) estimation of the in-situ stress field;(3) calculation of the resolved-shear-to-normal-stress ratio(slip tendency) on each fault with varying geomechanical parameters(coefficient of friction,pore pressure and cohesion) as inputs;and(4) estimation of Coulomb static stress changes as a consequence of failure in a nearby fault.Through combination of all these analyses,we characterize in detail both the active deformation in the geothermal field and its relationship with hot fluid migration.     

X-ray Computed Tomography study of the influence of consolidants on the hydric properties of sandstones for stone conservation studies

X-ray Computed Tomography (X-ray CT) has been used to study the petrophysical characteristics of a Jurassic sandstone from Asturias (Northern Spain) used as building stone in several monuments in the region. CT monitoring of water capillarity tests has made it possible to visualize the movement of water inside the samples, to relate this movement with texture characteristics, and to measure the height reached in successive images, thereby determining the capillary penetration coefficient; based on this coefficient, the effective capillary pore radius has also been estimated. An advantage of the use of CT is that, as the information comes from the sample interior, border effects that can be generated in the external faces can be avoided.The CT was also used to visualize how a commercial organosilicon consolidant penetrates inside the rock by means of capillarity, a usual way of consolidant application in stone restoration processes. The coefficient of capillary penetration of the product, determined on the basis of the measurements made on the tomographic images, is 53% less than that of water. The influence of rock texture characteristics on the capillarity both of the consolidant and the water was also observed.The samples underwent CT water capillarity studies before and after the consolidant application, proving that the treatment improves the rock's hydric properties. The coefficient of capillary penetration decreased by 24% following the application of the consolidant, whereas the effective pore radius decreased by more than 40%.     

Cambrian–early Ordovician volcanism across the South Armorican and Occitan domains of the Variscan Belt in France: Continental break-up and rifting of the northern Gondwana margin

The Cambrian–lower Ordovician volcanic units of the South Armorican and Occitan domains are analysed in a tectonostratigraphic survey of the French Variscan Belt. The South Armorican lavas consist of continental tholeiites in middle Cambrian–Furongian sequences related to continental break-up. A significant volcanic activity occurred in the Tremadocian, dominated by crustal melted rhyolitic lavas and initial rifting tholeiites. The Occitan lavas are distributed into five volcanic phases: (1) basal Cambrian rhyolites, (2) upper lower Cambrian Mg-rich tholeiites close to N-MORBs but crustal contaminated, (3) upper lower–middle Cambrian continental tholeiites, (4) Tremadocian rhyolites, and (5) upper lower Ordovician initial rift tholeiites. A rifting event linked to asthenosphere upwelling took place in the late early Cambrian but did not evolve. It renewed in the Tremadocian with abundant crustal melting due to underplating of mixed asthenospheric and lithospheric magmas. This main tectono-magmatic continental rift is termed the “Tremadocian Tectonic Belt” underlined by a chain of rhyolitic volcanoes from Occitan and South Armorican domains to Central Iberia. It evolved with the setting of syn-rift coarse siliciclastic deposits overlain by post-rift deep water shales in a suite of sedimentary basins that forecasted the South Armorican–Medio-European Ocean as a part of the Palaeotethys Ocean.