In-mine geoelectric investigations for detecting tectonic disturbances in coal seam structures

The methods of in-mine seam-sounding and transillumination (geoelectric tomography) for the detection of tectonic disturbances of coal seams were developed by the Department of Geophysics of the University of Miskolc in the 1970–80’s with the effective support of the former “Borsod” Coal Mines Ltd. The paper gives an overview about the theory of seam-sounding and a special geoelectric tomographic inversion, and introduces the in-mine geoelectric seam-sounding and transillumination measurement systems using vertical electrode dipoles. In the second part the paper, the results of an in-mine geoelectric measurement are presented, which was carried out in order to detect tectonic disturbances of the Miocene aged coal seams situated in Slovakia. As results of the geophysical investigation, the authors forecasted the tectonic features in the coal seam. The company confirmed the results by independent information about seam disturbances and tectonic features arising from the excavation of the investigated area.     

Correlations between deep convection and lightning activity on a global scale

Satellite observations of cloud top temperature and lightning flash distribution are used to examine the relationship between deep convection and lightning activity over the tropical regions of the northern and southern hemispheres. In agreement with previous work, the analysis of the results shows that, in the summer of both hemispheres, the lightning activity in continental deep convective storms is more intense than that in marine deep convective storms by a factor of between 7 and 10. Furthermore, it was observed that on average the daily lightning rate per 1°×1° grid cell for the southern hemisphere (SH) is about 20% greater than that of the northern hemisphere (NH), which can be attributed to a larger fractional cover by deep convective clouds in the SH. By using a set of independent indicators, it is shown that deep convection and lightning activity over land are well correlated (with correlation coefficients of 0.8 and 0.6 for NH and SH, respectively). This suggests the capacity for observations to act as a possible method of monitoring continental deep convective clouds, which play a key role in regulating the Earth’s climate. Since lightning can be monitored easily from ground networks and satellites, it could be a useful tool for validating the performance of model convective schemes and for monitoring changes in climate parameters.     

Analytic Simulation of the Elastic Waves Propagation in the Neighborhood of Fluid Filled Wells with Monopole Sources

An analytic formulation to understand the scattering, diffraction and attenuation of elastic waves at the neighborhood of fluid filled wells is presented. An important, and not widely exploited, technique to carefully investigate the wave propagation in exploration wells is the logging of sonic waveforms. Fundamental decisions and production planning in petroleum reservoirs are made by interpretation of such recordings. Nowadays, geophysicists and engineers face problems related to the acquisition and interpretation under complex conditions associated with conducting open-hole measurements. A crucial problem that directly affects the response of sonic logs is the eccentricity of the measuring tool with respect to the center of the borehole. Even with the employment of centralizers, this simple variation, dramatically changes the physical conditions on the wave propagation around the well. Recent works in the numerical field reported advanced studies in modeling and simulation of acoustic wave propagation around wells, including complex heterogeneities and anisotropy. However, no analytical efforts have been made to formally understand the wireline sonic logging measurements acquired with borehole-eccentered tools. In this paper, the Graf’s addition theorem was used to describe monopole sources in terms of solutions of the wave equation. The formulation was developed from the three-dimensional discrete wave-number method in the frequency domain. The cylindrical Bessel functions of the third kind and order zero were re-derived to obtain a simplified set of equations projected into a bi-dimensional plane-space for displacements and stresses. This new and condensed analytic formulation allows the straightforward calculation of all converted modes and their visualization in the time domain via Fourier synthesis. The main aim was to obtain spectral surfaces of transfer functions and synthetic seismograms that might be useful to understand the wave motion produced by the eccentricity of the source and explain in detail the new arising borehole propagation modes. Finally, time histories and amplitude spectra for relevant examples are presented and the validation of time traces using the spectral element method is reported.     

Evaluation of 2D models for the prediction of surface depression storage using realistic reference values

Depression storage (DS) is the maximum storage of precipitation and runoff in the soil surface at a given slope. The DS is determined by soil roughness that in agricultural soils is largely affected by tillage. The direct measurement of DS is not straightforward because of the natural permeability of the soil. Therefore, DS has generally been estimated from 2D/3D empirical relationships and numerical algorithms based on roughness indexes and height measurements of the soil surface, respectively. The objective of this work was to evaluate the performance of some 2D models for DS, using direct and reliable measurements of DS in an agricultural soil as reference values. The study was carried out in experimental microplots where DS was measured in six situations resulting from the combination of three types of tillage carried out parallel and perpendicular to the main slope. Those data were used as reference to evaluate four empirical models and a numerical method. Longitudinal altitudinal profiles of the relief were obtained by a laser profilometer. Infiltration measurements were carried out before and after tillage. The DS was largely affected by tillage and its direction. Highest values of DS are found on rougher surfaces mainly when macroforms cut off the dominant slope. The empirical models had a limited performance while the numerical method was the most effective, even so, with an important variability. In addition, a correct hydrological management should take into account that each type of soil tillage affects infiltration rate differently. Copyright © 2016 John Wiley & Sons, Ltd.     

Biogeographical drivers of ragweed pollen concentrations in Europe

Theoretical and Applied Climatology - The drivers of spatial variation in ragweed pollen concentrations, contributing to severe allergic rhinitis and asthma, are poorly quantified. We analysed the...     

Timing of low-temperature metamorphism and cooling of the Paleozoic and Mesozoic formations of the Bükkium,innermost Western Carpathians,Hungary

K-Ar ages of illite-muscovite and fission track ages of zircon and apatite were determined from various lithotypes of the Bükkium, which forms the innermost segment of the Western Carpathians. The stratigraphic ages of these Dinaric type formations cover a wide range from the Late Ordovician up to the Late Jurassic. The grade of the orogenic dynamo-thermal metamorphism varies from the late diagenetic zone through the anchizone up to the epizone (chlorite, maximally biotite isograd of the greenschist facies). The K-Ar system of the illite-muscovite in the < 2 m grain-size fraction approached equilibrium only in epizonal and high-temperature anchizonal conditions. The orogenic metamorphism culminated between the eo-Hellenic (160-120 Ma) phase connected to the beginning of the subduction in the Dinarides, and the Austrian (100-95 Ma) phase characterized by compressional crustal thickening. No isotope geochronological evidence was found for proving any Hercynian recrystallization. The stability field of fission tracks in zircon was approached using the thermal histories of the different tectonic units. A temperature less than 250°C and effective heating time of 20–30 Ma had only negligible effects on the tracks, whereas total annealing was reached between 250 and 300°C. Apatite fission track ages from the Paleozoic and Mesozoic formations show that the uplift of the Bükk Mountains occurred only in the Tertiary (not earlier than ca. 40 Ma ago). Thermal modeling based on apatite fission track length spectra and preserved Paleogene sediment thickness data proved that the Late Neogene burial of the recently exhumed plateau of the Bükk Mountains exceeded 1 km.     

DInSAR analysis of ALOS PALSAR images for the assessment of very slow landslides: the Tena Valley case study

In this work we analyse the performance of advanced land observing satellite (ALOS) phased array type L-band syntetic aperture radar (PALSAR) images for mapping and monitoring of very slow landslides using conventional differential interferometry in the Tena Valley (Central Pyrenees, Spain). These results are compared with those retrieved in previous works where multi-band advanced differential interferometric synthetic aperture radar (DInSAR) analysis was performed for the same area using PSI techniques. The study area is largely underlain by slates (ca. 80 %) where large deep-seated very slow earth flows are dominant. The results reveal that DInSAR analysis is able to measure displacements of landslides with a greater spatial coverage than PSI analysis, but for a lower amount of them (nine against 51). Overall, the combination of the DInSAR and multi-band PSI analysis permitted to map and monitor 68 % of the landslides in Tena Valley. From this amount, 63 landslides are considered as active. The main advantage of DInSAR with respect to PSI analysis is the capability to detect faster movements (up to 145 cm?year^?1) derived from the 46 days interferograms. That is the case of Sextas and La Selva landslides where an acceleration of the moving mass was measured after intense rainfall periods producing major damages to linear infrastructures. The combination of measured displacement from ALOS interferograms, with the observed damages on the A-136 road, was useful to assess the potential damage that could cause these slow movements. In general, it is demonstrated that even though PSI analysis provides a better performance in terms of landslide mapping, L-band DInSAR analysis provides an added value for landslide hazard assessment through radar remote sensing. For this reason it is necessary to encourage the launch of new satellite missions similar to ALOS PALSAR that could operate with shorter revisiting time periods.