Development,urban planning and political decisions. A triad that built territories at risk

Natural Hazards - Chilean geography exposes the country to high-level risks such as earthquakes and tsunamis. The disasters of 1930, 1960, 2010, and 2014 testify to the continuous link between...     

Relationships Between Petrophysical and Mechanical Properties of Certain Calcarenites Used in Building

Mendicino calcarenite was once widely used in traditional constructions by Italy’s foremost stonemasons’ schools. This paper provides a complete physico-mechanical characterization in order to improve understanding of strength and durability properties and so apply that knowledge to conservation and new construction. Stone samples from three lithofacies are taken from the following quarries of Cosenza province: Scannelle in Malito; Cannataro in Carolei; Albanese in San Lucido. Samples are subjected to: X-ray diffraction, mercury intrusion porosimetry, ultrasonic pulse velocity, capillary water absorption, uniaxial compressive, flexural, point load tests with respect to the X, Y, Z axes. Malito samples exhibit creamy colour, better hydric behaviour, low open porosity, reduced water absorption capability, isotropic hydric behaviour, higher fossil abundance (both in number and size) than the lithofacies taken from Carolei and San Lucido, which exhibit whitish colour, greater strength and more homogeneous texture. The greater compactness of Carolei and San Lucido samples can be ascribed to homogeneity and low porosity and their better mechanical properties to textural features. Anisotropy plays an important role. Placing stone samples along the Z axis prevents water intrusion, and improves mechanical strength. Isotropy and compact and heterogeneous fabric in stones result in higher strength and lower water absorption.

     

9000 years of changes in peat organic matter composition in Store Mosse (Sweden) traced using FTIR-ATR

Store Mosse (the ‘Great Bog’ in Swedish) is one of the most extensive bog complexes in southern Sweden (~77 km²), where pioneering palaeoenvironmental research has been carried out since the early 20th century. This includes, for example, vegetation changes, carbon and nitrogen dynamics, peat decomposition, atmospheric metal pollution, mineral dust deposition, dendrochronology, and tephrochronology. Even though organic matter (OM) represents the bulk of the peat mass and its compositional change has the potential to provide crucial ecological information on bog responses to environmental factors, peat OM molecular composition has not been addressed in detail. Here, a 568-cm-deep peat sequence was studied at high resolution, by attenuated reflectance Fourier-transform infrared spectroscopy (FTIR-ATR) in the mid-infrared region (4000–400 cm^–1). Principal components analysis was performed on selected absorbances and change-point modelling was applied to the records to determine the timing of changes. Four components accounted for peat composition: (i) depletion/accumulation of labile (i.e. carbohydrates) and recalcitrant (i.e. lignin and other aromatics, aliphatics, organic acids and some N compounds) compounds, due to peat decomposition; (ii) variations in N compounds and carbohydrates; (iii) residual variation of lignin and organic acids; and (iv) residual variation of aliphatic structures. Peat decomposition showed two main patterns: a long-term trend highly correlated to peat age (r = 0.87), and a short-term trend, which showed five main phases of increased decomposition (at ~8.4–8.1, ~7.0–5.6, ~3.5–3.1, ~2.7–2.1 and ~1.6–1.3 ka) – mostly corresponding to drier climate and its effect on bog hydrology. The high peat accumulation event (~5.6–3.9 ka), described in earlier studies, is characterized by the lowest degree of peat decomposition of the whole record. Given that FTIR-ATR is a quick, non-destructive, cost-effective technique, our results indicate that it can be applied in a systematic way (including multicore studies) to peat research and provide relevant information on the evolution of peatlands.     

Resource Model Updating For Compositional Geometallurgical Variables

In the field of mineral resources extraction, one main challenge is to meet production targets in terms of geometallurgical properties. These properties influence the processing of the ore and are often represented in resource modeling by coregionalized variables with a complex relationship between them. Valuable data are available about geometalurgical properties and their interaction with the beneficiation process given sensor technologies during production monitoring. The aim of this research is to update resource models as new observations become available. A popular method for updating is the ensemble Kalman filter. This method relies on Gaussian assumptions and uses a set of realizations of the simulated models to derive sample covariances that can propagate the uncertainty between real observations and simulated ones. Hence, the relationship among variables has a compositional nature, such that updating these models while keeping the compositional constraints is a practical requirement in order to improve the accuracy of the updated models. This paper presents an updating framework for compositional data based on ensemble Kalman filter which allows us to work with compositions that are transformed into a multivariate Gaussian space by log-ratio transformation and flow anamorphosis. This flow anamorphosis, transforms the distribution of the variables to joint normality while reasonably keeping the dependencies between components. Furthermore, the positiveness of those variables, after updating the simulated models, is satisfied. The method is implemented in a bauxite deposit, demonstrating the performance of the proposed approach.

     

Morphosedimentary features and recent depositional architectural model of the Cantabrian continental margin

Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180–245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700–4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water — MW) that interact with the Le Danois Bank favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops.The recent architecture depositional model is complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale).     

Diagnosis of trace metal contamination in sediments: the example of Ensenada and El Sauzal, two harbors in Baja California, Mexico

Total metal concentrations in sediments from within Ensenada and El Sauzal Harbors are generally higher than at the mouths. Grain-size analyses suggested that this enrichment could be due to the presence of fine-grained sediments in the inner part of the harbors rather than to anthropogenic perturbations. The (Me/Al)(sample) ratios for Pb, Co, Ni and Fe were significantly higher for Ensenada Harbor relative to El Sauzal Harbor, whereas the ratios for Cd, Mn, Zn and Cu were statistically equivalent for both harbors. Calculated enrichment factors [EF(Me)=(Me/Al)(sample)/(Me/Al)(shale)] indicated that the metals showing slight enrichment were those associated with anthropogenic contamination (Pb, Zn), or probably related to primary productivity in the water column (Cd, Co). The levels of most of the metals were not greatly enriched, a consideration that is of the utmost importance when contamination issues are at stake.     

Sediment resuspension events induced by the wake wash of deep-draft vessels

Hydrodynamics and sediment resuspension events, induced at the shoreline by a deep-draft vessel passing nearby, are described. Measurements (pressure, currents and turbidity) were obtained at 4 Hz, on a lower beach ~50 m from a channel where large car ferries operate in Wootton Creek, Isle of Wight. The study focuses on a representative 8-min 32-s-long record, during which two large vessels passed the channel section. At the shore, the passage of each vessel induced a long-period water-level drawdown, followed by a water-level oscillation (seiche) of similar period, and the short-period waves of the wake. Both drawdowns were the main constituents of the prevailing wave pattern. The second drawdown was the largest in amplitude, in response to a higher speed of the ferry, and the influence of the seiche which had been activated during the preceding event. Two successive peaks of turbidity were observed shortly after this drawdown. Analyses of current velocity and direction indicate that the sediments resuspended originated from the shallower upper beach. Anthropogenically induced erosion of the foreshore is predicted at Wootton Creek.     

A method for checking the quality of geographic metadata based on ISO 19157

With recent advances in remote sensing, location-based services and other related technologies, the production of geospatial information has exponentially increased in the last decades. Furthermore, to facilitate discovery and efficient access to such information, spatial data infrastructures were promoted and standardized, with a consideration that metadata are essential to describing data and services. Standardization bodies such as the International Organization for Standardization have defined well-known metadata models such as ISO 19115. However, current metadata assets exhibit heterogeneous quality levels because they are created by different producers with different perspectives. To address quality-related concerns, several initiatives attempted to define a common framework and test the suitability of metadata through automatic controls. Nevertheless, these controls are focused on interoperability by testing the format of metadata and a set of controlled elements. In this paper, we propose a methodology of testing the quality of metadata by considering aspects other than interoperability. The proposal adapts ISO 19157 to the metadata case and has been applied to a corpus of the Spanish Spatial Data Infrastructure. The results demonstrate that our quality check helps determine different types of errors for all metadata elements and can be almost completely automated to enhance the significance of metadata.     

Variations of young oceanic intraplate seismic energy released with relation to lithosphere age. Implications in the East Pacific Rise and its convergence with the Rivera subduction zone

Marine Geophysical Research - We have estimated empirical relationships that associate the age of the Pacific oceanic lithosphere with the seismic energy released on both flanks of the East Pacific...     

Synergetic efficiency of Lidar and WorldView-2 for 3D urban cartography in Northeast Mexico

Three-dimensional urban cartography is needed for city changes’ assessment. The variety of studies using 3D calculations of urban elements grows each year. Building and vegetation volumes are necessary to assess and understand spatio-temporal urban changeable environments. However, there are technical questions as to which method can improve 3D urban cartographic accuracy. The innovative part of this current study is the creation of a six-band hybrid obtained from LIDAR and WorldView2 synergy. Two different enhancement algorithms demonstrated the most important spectral features for the urban development and vegetation classes. Results indicated an improvement in accuracy by up to 21.3%, according to the Kappa coefficient. Both infra-red band and intensity band were the most significant, according to the principal components analysis. The synergy delimited classes and polygons, as well as the direct display of information regarding heights of elements and improving the extraction of roads, buildings and vegetation classes.