Archeological evidence of Pacific salmon in Hokkaido is reviewed and compared with results from western North America. Salmon remains have been found at 24 sites in Hokkaido from the Early Jomon Period to the Ainu Period (6000–100 years ago). Fish remains at three archeological sites in the Kushiro River basin indicated that Pacific salmon (Oncorhynchus spp.) were distributed and utilized from 6000 years ago. The present Kushiro Wetland was formerly covered with seawater and called the Paleo Kushiro Bay 5000–6000 years ago. Based on the molluscan fossil fauna, seawater temperature at Paleo Kushiro Bay was about 5°C warmer than at present. Warmer conditions for salmon in Kushiro 5000–6000 years ago corresponded with the poor conditions for salmon in the Columbia River basin 6000–7000 years ago. If the future global warming is similar to the conditions that prevailed 5000–6000 years ago, the southern limit of salmon distribution will shift northwards and the salmon production will decrease. However, they will not disappear from either Hokkaido or southwestern North America. 相似文献
Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines
of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and
other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks.
In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting
area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due
to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage
and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent
stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important
in a large diameter slurry pipe jacking operation.
Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust.
Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation
around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the
GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution
around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction
using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system
were clarified during the tests. 相似文献
Seismic tomography studies in the northeastern Japan arc have revealed the existence of an inclined sheet-like seismic low-velocity and high-attenuation zone in the mantle wedge at depths shallower than about 150 km. This sheet-like low-velocity, high-attenuation zone is oriented sub-parallel to the subducted slab, and is considered to correspond to the upwelling flow portion of the subduction-induced convection. The low-velocity, high-attenuation zone reaches the Moho immediately beneath the volcanic front (or the Ou Backbone Range) running through the middle of the arc nearly parallel to the trench axis, which suggests that the volcanic front is formed by this hot upwelling flow. Aqueous fluids supplied by the subducted slab are probably transported upward through this upwelling flow to reach shallow levels beneath the Backbone Range where they are expelled from solidified magma and migrate further upward. The existence of aqueous fluids may weaken the surrounding crustal rocks, resulting in local contractive deformation and uplift along the Backbone Range under the compressional stress field of the volcanic arc. A strain-rate distribution map generated from GPS data reveals a notable concentration of east–west contraction along the Backbone Range, consistent with this interpretation. Shallow inland earthquakes are also concentrated in the upper crust of this locally large contraction deformation zone. Based on these observations, a simple model is proposed to explain the deformation pattern of the crust and the characteristic shallow seismic activity beneath the northeastern Japan arc. 相似文献
The Fukuoka District Meteorological Observatory recently logged three possible deep low-frequency earthquakes (LFEs) beneath eastern Kyushu, Japan, a region in which LFEs and low-frequency tremors have never before been identified. To assess these data, we analyzed band-pass filtered velocity seismograms and relocated LFEs and regular earthquakes using the double-difference method. The results strongly suggest that the three events were authentic LFEs, each at a depth of about 50 km. We also performed relocation analysis on LFEs recorded beneath the Kii Peninsula and found that these LFEs occurred near the northwest-dipping plate interface at depths of approximately 29–38 km. These results indicate that LFEs in southwest Japan occur near the upper surface of the subducting Philippine Sea (PHS) plate. To investigate the origin of regional differences in the occurrence frequency of LFEs in western Shikoku, the Kii Peninsula, and eastern Kyushu, we calculated temperature distributions associated with PHS plate subduction. Then, using the calculated thermal structures and a phase diagram of water dehydration for oceanic basalt, the water dehydration rate (wt.%/km), which was newly defined in this study, was determined to be 0.19, 0.12, and 0.08 in western Shikoku, the Kii Peninsula, and eastern Kyushu, respectively; that is, the region beneath eastern Kyushu has the lowest water dehydration rate value. Considering that the Kyushu–Palau Ridge that is subducting beneath eastern Kyushu is composed of tonalite, which is low in hydrous minerals, this finding suggests that the regionality may be related to the amount of water dehydration associated with subduction of the PHS plate and/or differences in LFE depths. Notable dehydration reactions take place beneath western Shikoku and the Kii Peninsula, where the depth ranges for dehydration estimated by thermal modeling agree well with those for the relocated LFEs. The temperature range in which LFEs occur in these regions is estimated to be 400–500 °C. 相似文献
The Kuroshio flows very close to Cape Shionomisaki when it takes a straight path. The detailed observations of the Kuroshio were made both on board the R/V Seisui-maru of Mie University and on board the R/V Wakayama of the Wakayama Prefectural Fisheries Experimental Station on June 11–14, 1996. It was confirmed that the current zone of the Kuroshio touches the coast and bottom slope just off Cape Shionomiaki, and that the coastal water to the east of the cape was completely separated from that to the west. The relatively high sea level difference between Kushimoto and Uragami could be caused by this separation of the coastal waters when the Kuroshio takes a straight path. This flow is rather curious, as the geostrophic flow, which has a barotropic nature and touches the bottom, would be constrained to follow bottom contours due to the vorticity conservation law. The reason why the Kuroshio leaves the bottom slope to the east of Cape Shionomisaki is attributed to the high curvature of the bottom contours there: if the current were to follow the contours, the centrifugal term in the equation of motion would become large and comparablee to the Coriolis (or pressure gradient) term, and the geostrophic balance would be destroyed. This creates a current-shadow zone just to the east of the cape. As the reason why the current zone of the Kuroshio intrudes into the coastal region to the west of the cape, it is suggested that the Kii Bifurcation Current off the southwest coast of the Kii Peninsula, which is usually found when the Kuroshio takes the straight path, has the effect of drawing the Kuroshio water into the coastal region. The sea level difference between Kushimoto and Uragami is often used to monitor the flow pattern of the Kuroshio near the Kii Peninsula. It should be noted that Uragami is located in the current shadow zone, while Kushimoto lies in the region where the offshore Kuroshio water intrudes into the coastal region. The resulting large sea level difference indicates that the Kuroshio is flowing along the straight path. 相似文献
The lunar photometric function, which describes the dependency of the observed radiance on the observation geometry, is used for photometric correction of lunar visible/near-infrared data. A precise photometric correction parameter set is crucial for many applications including mineral identification and reflectance map mosaics. We present, for the first time, spectrally continuous photometric correction parameters for both sides of the Moon for wavelengths in the range 0.5-1.6 μm and solar phase angles between 5° and 85°, derived from Kaguya (SELENE) Spectral Profiler (SP) data. Since the measured radiance also depends on the surface albedo, we developed a statistical method for selecting areas with relatively uniform albedos from a nearly 7000-orbit SP data set. Using the selected data set, we obtained empirical photometric correction parameter sets for three albedo groups (high, medium, and low). We did this because the photometric function depends on the albedo, especially at phase angles below about 20° for which the shadow hiding opposition effect is appreciable. We determined the parameters in 160 bands and discovered a small variation in the opposition effect due to the albedo variation of mafic mineral absorption. The consistency of the photometric correction was checked by comparing observations made at different times of the same area on the lunar surface. Variations in the spectra obtained were lower than 2%, except for the large phase angle data in mare. Lastly, we developed a correction method for low solar elevation data, which is required for high latitude regions. By investigating low solar elevation data, we introduced an additional correction method. We used the new photometric correction to generate a 1° mesh global lunar reflectance map cube in a wavelength range of 0.5-1.6 μm. Surprisingly, these maps reveal that high latitude (?75°) regions in both the north and south have much lower spectral continuum slopes (color ratio r1547.7nm/r752.8nm ? 1.8) than the low and medium latitude regions, which implies lower degrees of space weathering. 相似文献
Acoustic emission (AE) technique that is capable of diagnosing the failure process of stressed materials has rarely reported its application to sandy soils subjected to triaxial compression. In this paper, drained triaxial compression tests incorporating with a high-performance AE measurement system were conducted for dry sands with different confining stresses and initial relative densities. Generally, an increased confining stress or initial relative density generates more acoustic emissions, while there also exist exceptions due to different failure patterns. A good resemblance between stress–strain and AE hit rate–strain relations was observed, and power functions between the mechanical parameters and AE hit rate were well established regardless of different confining stresses and initial relative densities. Besides, the behavioral state of yield and peak during compression could be also evaluated by AE hit rate, compared with conventional stress–strain determination. Particularly, the peak AE hit rate is found not always synchronous to but fluctuating at around the peak stress depending on different failure patterns, which might provide beneficial insights into the incipient failure of sands. The present good consistencies suggest that AE characteristics could be used as alternative parameters to evaluate and even predict the mechanical behavior of dry sands.
Some of the results about vertical profile of heavy metals of seawater to the south of Japan in Oct. 1990 are presented and discussed in relation to the concentration of dissolved Cu, Cd and Ni to biogeochemical environments. It points out that the distribution of dissolved Cu is higher in surface water than that in/upper 500 m layer, and maxima value attains the 8. 2 n mol/dm3 in depth of 4 000 m. The concentrations of dissolved Ni ranges from 3. 4 n mol/dm3 in surface seawater to 8. 5 n mol/dm3 in the deep to the south of Japan. The highest values are observed in the colder waters. This paper shows also that the vertical profile of dissolved Cd is perfect nutrient-type distribution. And dissolved Cd and Phosphate are linearly correlated by the regression equation. The ·Cd : ·N : ·P atomic ratio is 3. 5 × 10-4 : 14 : 1. 相似文献