Three dimensional simulation of fluid flow in X‐ray CT images of porous media

A numerical scheme is developed in order to simulate fluid flow in three dimensional (3‐D) microstructures. The governing equations for steady incompressible flow are solved using the semi‐implicit method for pressure‐linked equations (SIMPLE) finite difference scheme within a non‐staggered grid system that represents the 3‐D microstructure. This system allows solving the governing equations using only one computational cell. The numerical scheme is verified through simulating fluid flow in idealized 3‐D microstructures with known closed form solutions for permeability. The numerical factors affecting the solution in terms of convergence and accuracy are also discussed. These factors include the resolution of the analysed microstructure and the truncation criterion. Fluid flow in 2‐D X‐ray computed tomography (CT) images of real porous media microstructure is also simulated using this numerical model. These real microstructures include field cores of asphalt mixes, laboratory linear kneading compactor (LKC) specimens, and laboratory Superpave gyratory compactor (SGC) specimens. The numerical results for the permeability of the real microstructures are compared with the results from closed form solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

Geochronology of the American-Antarctic Ridge

A new map of chrons for the American-Antarctic Ridge area has been compiled. Its analysis and the calculations performed showed that the seafloor spreading with respect to its axis started before 85 My B.P. The spreading directions were 115° (chrons C34-C29), 145° (chrons C29-C21), 110° (chrons C21-C5C), and 85° (chrons C5C-C1). The maximum rates of about 4 cm/year were reached earlier than 52 My B.P.; subsequently, a progressive general decrease in the spreading rate has been observed. According to our forecast, the spreading may cease in the following 3.5 My.     

A study on the polarimetric properties of various features using SIR-C data

Spaceborne Imaging Radar (SIR-C) data acquired over Gujarat, India in 1994 were processed and analysed using differnet techniques applicable to polarimetric SAR data such as polarization signatures, polarization index, decomposition of the signal and polarization phase difference and limited groundtruth data. It has been observed that multi-frequency polarimetric data enhances the potential of retrieving geo-physical parameters. The polarization signatures are found to vary with the nature of the target. Target decomposition of the returned signal will be useful for the classification of various features. Polarization Phase Difference (PPD) gives good information about the vegetation parameters.     

In situ estimation of the effective chemical diffusion coefficient of a rock matrix in a fractured aquifer

An in situ method of estimating the effective diffusion coefficient for a chemical constituent that diffuses into the primary porosity of a rock is developed by abruptly changing the concentration of the dissolved constituent in a borehole in contact with the rock matrix and monitoring the time-varying concentration. The experiment was conducted in a borehole completed in mudstone on the campus of the University of the Free State in Bloemfontein, South Africa. Numerous tracer tests were conducted at this site, which left a residual concentration of sodium chloride in boreholes that diffused into the rock matrix over a period of years. Fresh water was introduced into a borehole in contact with the mudstone, and the time-varying increase of chloride was observed by monitoring the electrical conductivity (EC) at various depths in the borehole. Estimates of the effective diffusion coefficient were obtained by interpreting measurements of EC over 34 d. The effective diffusion coefficient at a depth of 36 m was approximately 7.8×10^?6 m²/d, but was sensitive to the assumed matrix porosity. The formation factor and mass flux for the mudstone were also estimated from the experiment.     

A geomorphological approach to sustainable planning and management of the coastal zone of Kuwait

The coastal zone in Kuwait has been under a considerable pressure from conflicting land uses since the early 1960s, as well as from the destruction and oil pollution caused by the Gulf War. To avoid further damage and to protect the coastal heritage it is essential to adopt an environmentally sustainable management process. This paper shows how the study of coastal geomorphology can provide a sound basis for sustainable planning and management. Based on coastal landforms, sediments and processes, the coastline of Kuwait was divided into nine geomorphic zones. These zones were grouped into two main geomorphic provinces. The northern province is marked by extensive muddy intertidal flats and dominated by a depositional and low-energy environment. The southern geomorphic province is characterised by relatively steep beach profiles, rocky/sandy tidal flats and a moderate to high-energy environment. The study has demonstrated that pollution, benthic ecology and other environmental conditions of the coast are a function of coastline geomorphology, sedimentology and related processes. The geomorphological information was used to determine the coastal vulnerability and to assess the environmental impacts of development projects and other human activities. Several strategies were outlined to integrate the geomorphic approach into the management of the coastal resources.     

A new record and a new ichnospecies of Arachnostega from the Middle Miocene of Egypt

The ichnogenus Arachnostega Bertling, 1992 is recorded for the first time from a bioeroded, coral-rich, Middle Miocene limestone bed in the middle Siwa Escarpment Member (Marmarica Formation) at Siwa Oasis, northern Western Desert of Egypt. These burrowing traces are preserved on the surface of a few internal moulds of bivalves and gastropods. Until now, the ichnogenus Arachnostega included a single ichnospecies, A. gastrochaenae Bertling, 1992. In the material studied herein, two ichnospecies are identified, described, illustrated and compared with other, similar traces. One of these is a new ichnospecies of Arachnostega; this is here named A. siwaensis ichnosp. nov. It is distinguished from A. gastrochaenae in the possession of tunnels that usually branch in a V-pattern; intervals of ramification are longest in the main branch and decrease in second- and third-order branches. Arachnostega traces were produced in a warm, low-energy, shallow-marine (<10?m water depth) environment. Polychaetes are the most likely producers of marine Arachnostega, which are commonly occurred in the same studied bed. This new occurrence is significant in extending the known stratigraphical and geographical ranges of Arachnostega into the Middle Miocene of Egypt.     

A Kinematic Model of the Formation of the Sim Trough of the Uralian Foredeep

The structural features and mechanism of the formation of the Sim trough within the Uralian Foredeep, as well as the development of the entire Karatau–Suleiman block, are considered. This wedge-shaped block was subject to lateral extrusion to the north along conjugated strike-slip fault zones under a general latitudinal compression. This factor determined the local meridional compression and latitudinal extension of the block. In the central part of the block, the latitudinal extension was compensated by gradual subsidence, which resulted in the formation of the Sim trough.     

Prediction of Engineering Properties of Basalt Rock in Jordan Using Ultrasonic Pulse Velocity Test

Basalt is an extrusive igneous rock derived from Lava and spread over different localities in Jordan. It can be used in industrial applications, and as construction materials. Before using basalt, it is essential to determine its dry density, porosity, uniaxial compressive strength, and Brazilian tensile strength. The testing procedure and sample preparation used to determine the engineering properties are time-consuming and need expertise. Hence, the ultrasonic pulse velocity (UPV) test, a quick and non-destructive evaluation method, was used to determine the engineering properties. Empirical relationships for determination of dry density, porosity, uniaxial compressive strength, Brazilian tensile strength, and tangent modulus of elasticity were deduced. Good correlation coefficients (R²?=?0.832–0.929) were obtained between UPV and dry density, porosity, uniaxial compressive strength, Brazilian tensile strength and modulus of elasticity. These correlations were limited to intact basalt with UPV?≥?4000 m/s.