Le complexe filonien de Fuerteventura (Iles Canaries)

Two sectors in the island have been distinguished which depend on the intensity of the penetration of the dyke swarm: the central-western sector, where the proportion of dykes in relation to the host rocks is — in some cases — more than 90% and all the rest of the island, where the dykes are in less proportion. In the central-western sector the predominant direction varies from N-10^o-E to N-20^o-E, whilst in the rest of the island a clear constant direction does not exist, although there are some directional trends more or less well defined. Most dykes are of basaltic composition, but there are also salic dykes (trachytic and phonolitic) and camptonites. The dykes from the western sector have suffered intense transformation processes (albitization and amphibolization), so that it is frequent to find dykes that do not preserve practically any one of their primary minerals. As the albitization process also affects the host rocks and has a regional development; we can speak of a regional metamorphism equivalent in its intensity to the Green Schist. Three main generations of dykes have been established: 1st) those of an approximately N-S direction, forming the older generation, constituted by multiple injections, 2nd) those genetically related to the Basaltic Series I, 3rd) those of salic composition, closely related with the syenitic-trachytic intrusions.     

Electrical conductivity of igneous rocks: Composition and temperature relations

The conductivity of four igneous rocks with, 49, 65, 77, and 84% SiO₂ was measured as a function of temperature in the interval from 20° to 1280°C; measurements were made in a vacuum of 10^?3 torr. No simple relationships were found between conductivity and SiO₂ content or versus major element groupings such as Na₂O=K₂O=CaO and TiO₂=Cr₂O₃=Al₂O₃=Fe₂O₃=FeO. An analytical expression was obtained between conductivity and the albite-quartz ratio, valid for temperatures between 300° and 1200°C. It was necessary to compute the CIPW norm in order to obtain the albite and quartz percentages. The onset of melting apparently occurred between 600° and 700°C. Petrography performed on two samples after cooling showed 70 and 85% partial melting. Three conduction regions were identified: 1) below 300°C, 2) between 300°C and 600°C, and 3) above 600°C. Different activation energies obtained for the heating and cooling intervals confirm that the sample undergoes textural changes in the heating-cooling cycle. Activation energy increments of 0.1 and 0.2 eV per decade of albite-quartz ratio were obtained.     

Relation between semen quality and rangeland diets of mixed-breed male goats

The impact of range plant toxins on the reproductive performance of female cattle is economically important to the livestock industry. Nevertheless, there is little information on the significance of toxicosis from range plants on semen quality in domestic ruminants. A total of 18 adult mixed-breed bucks under range conditions were used to evaluate the effect of diet composition (microhistological analysis of fecal samples) on some semen characteristics, and blood and fecal components in April and August. Forages in the buck diets were grouped into 2 classes: low or high levels of each plant in the buck diets. Bucks with higher proportion of Acacia greggii, Flourensia cernua and Lindleya mespiloides in their diets yielded 23–50% less (p<0.05) semen than bucks with low proportion of these shrubs in their diet. Sperm motility was reduced by 3–8 percent units (p<0.05) by high levels of five rangeland shrubs in the buck diets. Bucks consuming high levels of Acacia greggii showed significantly lower percentages of normal sperm (92±10 vs. 96±3; p<0.05) than bucks with low intake of this forage. High proportions of Rhus virens and Solanum elaeagnifolium in the buck diet increased the percentage of normal sperm (5 units, p<0.05) when compared to bucks with low utilization of these forages. Increased intake of Acacia greggii, Dalea bicolor, Opuntia rastrera, Larrea tridentata and Cowania plicata reduced percentage of live sperm by 5 units (p<0.05). Blood metabolites analysis showed that increased levels of Acacia greggii and Parthenium incanum were related to better nutritional status of bucks. Zn (−), Cu (−) and glucose (+) were significant predictors of semen volume (r²=0.30). Cu (−) and cholesterol (−) accounted for 37% of the variation in percentage of normal sperms. Forty-four percent of the variation in secondary abnormalities was accounted by Zn (+) and cholesterol (+), whereas fecal N, serum total proteins and creatinine positively affected percentage of live sperms (r²=0.37). These results indicate that semen quality and metabolic profiles of grazing bucks were sensitive to the ingestion of some Chihuahuan desert forages.     

Relationship between subcellular cadmium distribution in prey and cadmium trophic transfer to a predator

We tested the hypothesis that exposure-related alterations in the subcellular Cd distribution in prey relate to changes in Cd absorption by a predator. Oligochaete worms,Limnodrilus hoffmeisteri were exposed for 1 wk or 6 wk to 0.5 μg Cd 1^?1, 47 μg Cd 1^?1, or 140 μg Cd 1^?1 (including¹⁰⁹Cd as a tracer) and relationships between oligochaete subcellular Cd distribution and Cd absorption by a predator, the grass shrimp (Palaemonetes pugio), were determined. Concentration and duration of Cd exposure had direct effects on oligochaete subcellular Cd distribution. Changes in oligochaete subcellular Cd distribution were characterized by increases in both the amount and proportion of Cd bound to the cytosolic fraction. The induction of Cd-binding proteins (e.g., metallothioneins) were suspected to be responsible for these changes. We found 1∶1 relationships between the amount and percentage of Cd in oligochaete cytosol and the amount and percentage of Cd adsorbed by shrimp. These results demonstrate that only metal bound to the soluble fraction of prey is available to higher trophic levels, and that factors influencing subcellular metal distribution in prey will directly alter metal trophic transfer to predators.     

GPS network monitors the Arabia-Eurasia collision deformation in Iran

The rate of crustal deformation in Iran due to the Arabia–Eurasia collision is estimated. The results are based on new global positioning system (GPS) data. In order to address the problem of the distribution of the deformation in Iran, Iranian and French research organizations have carried out the first large-scale GPS survey of Iran. A GPS network of 28 sites (25 in Iran, two in Oman and one in Uzbekistan) has been installed and surveyed twice, in September 1999 and October 2001. Each site has been surveyed for a minimum observation of 4 days. GPS data processing has been done using the GAMIT-GLOBK software package. The solution displays horizontal repeatabilities of about 1.2 mm in 1999 and 2001. The resulting velocities allow us to constrain the kinematics of the Iranian tectonic blocks. These velocities are given in ITRF2000 and also relative to Eurasia. This last kinematic model demonstrates that (1) the north–south shortening from Arabia to Eurasia is 2–2.5 cm/year, less than previously estimated, and (2) the transition from subduction (Makran) to collision (Zagros) is very sharp and governs the different styles of deformation observed in Iran. In the eastern part of Iran, most of the shortening is accommodated in the Gulf of Oman, while in the western part the shortening is more distributed from south to north. The large faults surrounding the Lut block accommodate most of the subduction–collision transition.     

Establishing habitat-specific indicator species in Tierra del Fuego with freshwater macroinvertebrates

As a tool to understand Tierra del Fuego’s basic ecology and detect changes due to human pressures, this study develops habitat bioindicators. We compared the freshwater benthic macroinvertebrates at 61 study sites in six habitat types: grassland streams, urbanised streams, forested streams, beaver ponds, lakes and peat bog ponds. Forty-nine taxa were identified; insects were the most diverse group. Beaver pond, lake and grassland stream assemblages were similar, as were those from lakes, grassland streams and peat bog ponds. Fourteen taxa were habitat-specific. In forests, these included mayfly scrapers (Andesiops, Meridialaris) and blackfly filterers (Gigantodax). In lakes, two copepod filterers were indicators, and in urban streams, one shredder (Aphroteniella) and three collector-gatherers (springtail, earthworm, aquatic worm). Predators (Corixa, Aeshna) were characteristic of peat bog ponds. Beaver ponds had no indicator species. Establishing links between species and ecosystems constitutes the beginning of a broader effort to understand anthropogenic impacts to Fuegian watersheds.     

Video-monitoring of wood discharge: first inter-basin comparison and recommendations to install video cameras

Wood in rivers plays a major role both ecologically and morphologically. In recent decades, due to human activities in the river channels and along the riparian zone, wood obstruction and jamming has exacerbated flooding hazards and infrastructure damage. Therefore, it is necessary to quantify the wood flux and discharge in rivers to improve wood hazard management. Among the various methods for monitoring the wood flux in a river, the streamside videography technique is effective given its high temporal and spatial resolution. Previous work monitored the wood discharge (m³/s) using this technique in the Ain River (France) during three floods (MacVicar and Piégay, 2012), and the same method is implemented on the Isère River (France) to obtain the statistics of wood discharge for two floods. Comparison between the two sites supports the generalization of both the monitoring technique and the link between wood discharge and flood characteristics. We first show that the maximum wood discharge is observed at bankfull discharge, and we confirm the three stage model proposed by MacVicar and Piégay (2012). Additionally, transverse distributions of the number of wood pieces and corresponding wood length appear to be similar for different flood magnitudes on each site. As a technical contribution, the use of the same technique on two sites allows for recommendations on key decisions related to the location and implementation of the equipment. Both statistical and technical contributions can be used by decision makers to implement this monitoring technique, acquire the wood transport parameters, and evaluate the potential wood hazards at local scale or along a river. © 2020 John Wiley & Sons, Ltd.     

Interactions between the Laramide Foreland and the passive margin of the Gulf of Mexico: Tectonics and sedimentation in the Golden Lane area,Veracruz State,Mexico

This paper focuses on the analyses of the clastic sedimentary infill of the Coastal Plain of Eastern Mexico, which initiated synchronously with the Laramide orogeny in the vicinity of the Golden Lane. Results of these analyses are used as boundary conditions for calibrating/interpreting seismic profiles across more distal depocenters in the offshore of the Gulf of Mexico, from the sea shore and continental slope in the west to the abyssal plain in the east. The objective of the study is to better predict the reservoir distribution in the Deep offshore Basin of the Gulf of Mexico (DBGM), in order to explore for petroleum.     

ESR chronology of the Somme River Terrace system and first human settlements in Northern France

The Somme Valley, Northern France, is famous for its archaeological sequence, where numerous rich Palaeolithic sites, such as Saint-Acheul, the type site of the Acheulian, have been discovered. The archaeological levels are often directly associated with fossil alluvial sediments of the River Somme or with slope deposits, including loess and palaeosols. In the middle reaches of the valley, near Amiens, the system of fossil-stepped fluvial terraces is particularly well developed and preserved, and occurs on 10 alluvial formations. These terraces, from +5 to +55 m above the present-day valley bedrock, allow the study of the environmental changes and the human settlement of this area through the Pleistocene.

Since 1988, ESR dating was systematically applied on bleached quartz extracted from the fossil fluvial deposits, in order to better describe the geological evolution of the stepped system. More recently, U-series/ESR dating has also been performed on teeth collected from the different terrace deposits. Here we present a synthetic review of the main ESR results, and propose an ESR chronology for the geological evolution of the Somme fluvial system and for the Middle Pleistocene human settlement of northern France.