The S-External pyrenees of Huesca

An Upper Cretaceous-Paleocene series is more or less detached from the Hercynian basement and piled up southward as a Younger Calcareous Chain. A broad belt of Eocene flysch with limestone intercalations terminates eastward against a contemporaneous cross-structure and is affected by a zone of persistent overturning.

---

Zusammenfassung Eine Oberkreide-PalÄozÄn-Serie ist teilweise vom herzynischen Untergrund abgeschert und südwÄrts als Jüngere Kalkkette aufgestaucht. Eine breite Zone von EozÄn-Flysch mit Kalkeinlagerungen endet nach Osten an einer gleichaltrigen Querstruktur. Sie enthÄlt einen durchgehend überkippten Streifen.

---

Résumé La série néocrétacée-paléocène est plus ou moins décollée du socle hercynien et déversée au sud comme «ChaÎne calcaire postérieure». Une large zone de flysch éocène à intercalations calcaires se termine vers l'est contre un accident transversal contemporain et est affectée d'une bande persistante de renversement.

---

. . . .

     

Palaeomagnetism of the Ordovician dolerites of the Crozon Peninsula (France)

Summary. In order to obtain a Lower Palaeozoic pole for the Armorican Massif and to test the origin of the Ibero-Armorican arc, the Ordovician dolerites of the Crozon peninsula have been palaeomagnetically studied. The samples show a multicomponent magnetization which has been revealed by AF and thermal demagnetization and thoroughly investigated with rock magnetic experiments, polished section examinations and K/Ar dating. Four groups of directions have been recognized, often superimposed on each other in an individual sample. One component (D) has always the lowest blocking temperatures and coercivities and is considered to be of viscous origin, acquired recently in situ or in the laboratory during storage. Two components (A and B) are interpreted to be of secondary origin and to correspond to the observed K/Ar age distribution between 300 and 190 Myr. These ages represent the time interval between two regional thermo-tectonic events, associated with the Hercynian orogeny and the intrusion of dykes related to the early opening of the Central Atlantic Ocean and the Bay of Biscay. A fourth component (C) could be of Ordovician or younger Palaeozoic age; it is not clear whether the age of the magnetization is pre- or post-folding, but a pre-folding age would yield a direction of magnetization similar to Ordovician results from the Iberian peninsula. The latter interpretation suggests a fairly high palaeolatitude, which is in agreement with a glacio-marine postulated for sediments overlying the dolerite sills.     

Spatial distribution and bonding forms of heavy metals in sediments along the middle course of the River Elbe (km 287ċ390)

Sediments of eight groyne fields along the middle course of the River Elbe (river km 287?390) were geochemically studied. The 78 sediment samples were analysed for pH and grain size distribution. The grain size fraction < 2 μm was used for mineralogical and chemical analysis: semiquantitative clay mineral analysis; total element content (Al, Ca, Fe, K, Mn, Cd, Cr, Cu, Ni, Pb, Zn), total inorganic and organic C, and bonding form fractionation with a six‐step sequential chemical extraction. The latter was performed on selected samples (n = 32). The sediments along the Elbe's course are still contaminated with heavy metals far above the local geogenic background level. An enrichment factor of more than 15 was calculated for zinc. Cr and Ni are the elements with the lowest enrichment. The bonding form analysis of selected heavy metals shows a dominance of relatively immobile bonding forms, e. g. the moderately reducible and the residual fraction, which implies a relative low mobility potential. Only Zn poses a higher potential threat to the environment, since it has a higher percentage of the first three extracted phases: adsorbed, carbonate, and easily reducible fraction.     

Constraining P-wave velocity variations in the upper mantle beneath Southeast Asia

We have produced a P-wave model of the upper mantle beneath Southeast (SE) Asia from reprocessed short period International Seismological Centre (ISC) P and pP data, short period P data of the Annual Bulletin of Chinese Earthquakes (ABCE), and long period PP-P data. We used 3D sensitivity kernels to combine the datasets, and mantle structure was parameterized with an irregular grid. In the best-sampled region our data resolve structure on scale lengths less than 150 km. The smearing of crustal anomalies to larger depths is reduced by a crustal correction using an a priori 3D model. Our tomographic inversions reveal high-velocity roots beneath the Archean Ordos Plateau, the Sichuan Basin, and other continental blocks in SE Asia. Beneath the Himalayan Block we detect high seismic velocities, which we associate with subduction of Indian lithospheric mantle. This structure is visible above the 410 km discontinuity and may not connect to the remnant of the Neo-Tethys oceanic slab in the lower mantle. Our images suggest that only the southwestern part of the Tibetan plateau is underlain by Indian lithosphere and, thus, that the upper mantle beneath northeastern Tibet is primarily of Asian origin. Our imaging also reveals a large-scale high-velocity structure in the transition zone beneath the Yangtze Craton, which could have been produced in multiple subduction episodes. The low P-wave velocities beneath the Hainan Island are most prominent in the upper mantle and transition zone; they may represent counter flow from the surrounding subduction zones, and may not be unrelated to processes beneath eastern Tibet.     

The ‘Stained Glass Procedure’, a new method to compare classification performance of images acquired with different pixel sizes

Objective comparison of classification performance of earth observation images, acquired at different spatial resolutions (e.g. NOAA-AVHRR, IRS-MOS, IRS-WiFS, Landsat-TM, IRS-LISS), is complicated because both class definition and training site selection are hampered by the inherent scale differences. This paper presents a new, generic method to compare the information content of such a set of images, the “Stained Glass Procedure”. It overcomes the stated problems by computing the scale-dependent, internal spectral variation in an image and by using this as an indicator for land cover information. The Stained Glass Procedure creates segments in the images and calculates the internal spectral variation in a high-spatial-resolution image for each segment. For each image from the set the average variance, weighted to area, is calculated. The Stained Glass Procedure can be used to predict the performance of sensors that are not available, yet, or to roughly determine the optimal spatial resolution for the classification of a specific area.The procedure was applied to images with pixel sizes ranging from 23 to 1100 m. Classification detail of Envisat-MERIS (300 m pixel size), not included in the image set, could be predicted accurately using the Stained Glass Procedure.The Stained Glass Procedure applies one procedure to all images, without any subjective decision during the analysis, thus offering a method to compare images with different pixel sizes in terms of classification detail that is truly objective.     

Mineralogical alteration and associated permeability changes induced by a high-pH plume: Modeling of a granite core infiltration experiment

Within the framework of the HPF project (Hyperalkaline Plume in Fractured Rock) at the Grimsel Test Site (Switzerland), a small scale core infiltration experiment was performed at the University of Bern. A high-pH solution was continuously injected, under a constant pressure gradient, into a cylindrical core of granite containing a fracture. This high-pH solution was a synthetic version of solutions characteristic of early stages in the degradation of cement. The interaction between the rock and the solutions was reflected by significant changes in the composition of the injected solution and a decrease in the permeability of the rock. Changes in the mineralogy and porosity of the fault gouge filling the fracture were only minor. One-dimensional reactive transport modeling, using a modified version of the GIMRT code, was used to interpret the results of the experiment. Dispersive and advective solute transport, mineral reaction kinetics and a coupling between porosity and permeability changes were taken into account. In order to obtain a reasonable agreement between models and experimental results, reactive surface areas of the order of 10⁵ m²/m³ rock had to be used. These values are much smaller than the values measured for the fault gouge filling the fracture, which are in the order of 10⁶–10⁷ m²/m³ rock. However, the results could be improved by adding a small fraction of fine grained mineral, which could explain the high initial peaks in Al and Si concentration. With the inclusion of this fine grained fraction, the initial surface areas in the model were within the range of the measured specific surface areas of the fault gouge. The fact that the decrease in permeability was significant despite the minor changes in mineralogy, suggests that permeability may be controlled by changes in the structure of the rock (pore geometries) rather than by only the bulk volumetric (porosity) changes.     

Spatio-temporal characteristics of small-scale wave–current ripples on the Ameland ebb-tidal delta

Ebb-tidal deltas are highly dynamic environments affected by both waves and currents that approach the coast under various angles. Among other bedforms of various scales, these hydrodynamics create small-scale bedforms (ripples), which increase the bed roughness and will therefore affect hydrodynamics and sediment transport. In morphodynamic models, sediment transport predictions depend on the roughness height, but the accuracy of these predictors has not been tested for field conditions with strongly mixed (wave–current dominated) forcing. In this study, small-scale bedforms were observed in the field with a 3D Profiling Sonar at five locations on the Ameland ebb-tidal delta, the Netherlands. Hydrodynamic conditions ranged from wave dominated to current dominated, but were mixed most of the time. Small-scale ripples were found on all studied parts of the delta, superimposed on megaripples. Even though a large range of hydrodynamic conditions was encountered, the spatio-temporal variations in small-scale ripple dimensions were relatively small (height 0.015 m, length 0.11 m). Also, the ripples were always highly three-dimensional. These small dimensions are probably caused by the fact that the bed consists of relatively fine sediment. Five bedform height predictors were tested, but they all overestimated the ripple heights, partly because they were not created for small grain sizes. Furthermore, the predictors all have a strong dependence on wave- and current-related velocities, whereas the ripple heights measured here were only related to the near-bed orbital velocity. Therefore, ripple heights and lengths in wave–current-dominated, fine-grained coastal areas ( mm) may be best estimated by constant values rather than values dependent on the hydrodynamics. In the case of the Ameland ebb-tidal delta, these values were found to be m and m. ©2019 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Geochemistry of overbank and high-order stream sediments in Belgium and Luxembourg: a way to assess environmental pollution

A geochemical survey of Belgium and Luxembourg was carried out as part of an international research project entitled ‘Regional geochemical mapping of Western Europe towards the year 2000'. The aim of this research was to map regional background geochemical patterns based on pristine or at least pre-industrial overbank samples and to deduce regional information on the degree of environmental pollution of floodplain and present-day river sediments. Over the entire study area (about 33,000 km²), 66 overbank sites have been sampled. Catchment areas range between 60 and 600 km². At each site an overbank profile has been dug out in the immediate vicinity of the river and described in detail. A first composite sample was taken 5–25 cm below the surface. This sample is supposed to represent deposition over the last centuries. Human interferences in this interval are often inferable based on changed sedimentary characteristics and the presence of anthropogenic particles such as charcoal, slags and brick fragments. A second composite sample was taken at depth, usually >1.5 m below the surface over an interval of about 20 cm. In most sites, the profile characteristics allowed to assume pre-industrial or even pristine conditions for this lower overbank sample. In some profiles this was confirmed by ¹⁴C-dating and/or by the absence of anthropogenic particles. Finally, a present-day stream sediment was sampled on the site to infer the actual pollution status. After drying at 80°C, disaggregation and sieving, the <125 μm fractions of the three sediment samples were analysed by XRF for major elements and several trace elements. Lower overbank samples generally show a direct link with the geological substrate and allow to assess natural background concentrations. Results from the mapping exercise as well as from the statistical analyses display a clear contrast between the northern part of Belgium where Cenozoic unconsolidated sandy and silty formations dominate which are especially vulnerable for erosion, and the southern part of Belgium and Luxembourg where Paleozoic and Mesozoic sandstones, carbonates, marls and shales are the prevalent lithologies. Here the shales are the most intensively eroded lithologies. This is especially reflected in the element patterns of Al₂O₃, MgO, K₂O, Ga, Ni, Rb, Sc and V which negatively correlate with SiO₂. Despite the human related pollution, the geological contrast between north and south Belgium is still recognisable in the geochemical pattern of the upper overbank and present-day stream sediment samples for the above-mentioned elements. Furthermore there is a clear increase in heavy metal contents (Zn, Cd, Pb, Cu), As and in certain locations in Ba from the lower to the upper overbank sediment, as well as to the present-day stream sediment. The relative increase in element content allows to assess the degree of pollution and helps to define those drainage areas where more detailed research is needed.     

The impact of the parking situation in shopping centres on store choice behaviour

The article discusses the effects of changing the parking situation in the surrounding of shopping centres on consumers store choice behaviour. To get insight into these effects a hierarchical logit model of parking lot and store choice behaviour is estimated and validated. The research is based on before-and-after data of supermarket visitors collected in a major regional shopping centre in a suburban area in The Netherlands. The model is estimated using the before data. At the level of the supermarkets the estimated hierarchical logit model performs very well. The model is less accurate at the level of parking lots but still performs satisfactory. Significant attributes are a constant representing the characteristics of the supermarket, the distance between supermarket and parking lot, the number of parking spaces per parking lot, the location of the parking lot vis-à-vis the origin of the consumer, and the availability of supermarket trolley facilities at the parking lot. Validating the model by reproducing the after data yields less satisfactory results. Especially the model does not perform very well on predicting parking lot choice. This revised version was published online in July 2006 with corrections to the Cover Date.     

Background of ground penetrating radar measurements

Characterization of the shallow subsurface (0.25 to 10 m) is of growing importance for engineering activities, solutions of environmental problems, and archaeological investigations. Ground-penetrating radar (GPR) is an appropriate technique considering the depth range of interest, the strength of electric and magnetic contrasts between different subsurface layers and buried objects, and the required resolution. GPR surveys can detect subsurface structures by recording electromagnetic reflections from discontinuities. The detectability of objects and the delineation of subsurface structures increases with increasing wave velocity and conductivity differences between the object and its surroundings or between adjacent layers. However, unwanted reflections from objects above the surface influence the images. Shielded antennas can be used to avoid strong reflections from these objects. The data thus obtained are, however, more difficult to interpret. The fundamentals of GPR and two different acquisition setups for a GPR system are discussed. Basic interpretation tools for travel-time and velocity estimation are described, and finally, case studies are presented, followed by conclusions.