Helium emission in the middle chromosphere

Slitless spectrograms obtained during the eclipse of 10 June 1972 have been analyzed to determine the height distribution of the D₃ He line intensity.For undisturbed regions the maximum of D₃ line intensity is confirmed to exist at about 1700km above the limb. Besides the above mentioned maximum, in plages a considerable intensity may be observed at low heights (h < 1000 km).An analysis of these observations for h > 1000 km has been carried out within the low temperature mechanism of triplet helium emission taking into account the helium ionization by XUV radiation. The density dependence of the 2³ S level population at different XUV flux values has been calculated. Our observations give N _e 2 × 10¹⁰ cm^–3 in the chromosphere at h = 2000 km. The probable coincidence of the H and He emission small filaments in the middle chromosphere is discussed.     

Two-dimensional pH distributions and dynamics in bioturbated marine sediments

The seafloor is the site of intense biogeochemical and mineral dissolution-precipitation reactions which generate strong gradients in pH near the sediment-overlying water interface. These gradients are usually measured in one-dimension vertically with depth. Two-dimensional pH distributions in marine sediments were examined at high resolution (65 × 65 μm pixel) and analytical precision over areas of ∼150 to 225 cm² using a newly developed pH planar fluorosensor. Dramatic three-dimensional gradients, complex heterogeneity, and dynamic changes of pH occur in the surficial zone of deposits inhabited by macrofauna. pH can vary by ±2 units horizontally as well as vertically over millimeter scales. pH minima zones often form in association with redoxclines within a few millimeters of inner burrow walls, and become more pronounced with time if burrows remain stable and irrigated for extended periods. Microenvironmental pH minima also form locally around decaying biomass and relict burrow tracks, and dissipate with time (∼5 d). H⁺ concentrations and fluxes in sandy mud show complex acid-base reaction distributions with net H⁺ fluxes around burrows up to ∼12 nmol cm⁻² d⁻¹ and maximum net reaction rates varying between −90 (consumption) to 120 (production) μM d⁻¹ (∼90 nmol cm⁻¹ d⁻¹ burrow length). Acid producing zones that surround irrigated burrows are largely balanced by acid titration zones along inner burrow walls and outer radial boundaries. The geometry and scaling of pH microenvironments are functions of diagenetic reaction rates and three-dimensional transport patterns determined by sediment properties, such as diffusive tortuosity, and by benthic community characteristics such as the abundance, mobility, and size of infauna. Previously, undocumented biogeochemical phenomena such as low pH regions associated with in-filled relict biogenic structures and burrowing tracks are readily demonstrated by two-dimensional and time-dependent images of pH and sedimentary structure.     

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.     

贵州南部“半边街式”铅锌矿床地质特征及其成因探讨

贵州省南部地区是全国重要的汞、锑资源分布区。2000年由于产于上泥盆统中铅锌矿的陆续发现,贵州省地矿局启动了以铅锌资源评价和成矿规律研究为主的地质工作,目标是总结铅锌矿产出的地质特征和成矿规律。通过三年的研究认为,该区处扬子准地台、华南褶皱带和右江造山带交汇部位,受晚古生代初期发生的陆内裂谷活动影响,产生了一个与桂中台陷相连的大型沉积凹陷区—黔南台陷沉积区,形成了巨厚碳酸盐和碎屑岩沉积,产生了与裂陷盆地边缘同沉积断层活动有关的低温成矿作用,造成了在晚泥盆纪以前的地层中汞、锑、砷、金、铅锌等矿床沿同沉积断层密集分布。本文通过矿床特征总结和矿床成因探讨,建立了准同生沉积成矿作用模式,旨在为该区寻找这类矿床提供参考和借鉴作用。     

预应力锚索在公路高陡边坡加固整治工程中的应用

预应力锚索锚固技术以其结构合理、工艺灵巧、适应性广、施工速度快、造价低等优势，目前已广泛应用于各工程领域。在桂（林）—柳（州）高速公路高边坡加固工程中采用了该项技术，经过近1年的运转表明，效果良好。对该项工程作了详细讨论，介绍了边坡的地质条件、稳定性分析和设计参数的选取，总结了施工中锚索的造孔、下索、注浆、张拉锁定等设计及施工要点。     

汽车底盘技术在HGY-1500型钻机中的应用

在HGY-1500型钻机的设计中应用汽车底盘技术，选用汽车变速器、离合器等零部件；钻机分动箱采用斜齿圆柱齿轮传动，使用接合套式换挡装置进行换挡，提高了钻机工作的可靠性，降低了生产成本，减轻了钻机质量，操作轻松、方便。     

重力取样器取样技术研究

在湖泊环境研究中，淤泥质沉积物取样是一项很重要的工作，样品的取心率和原状性直接影响了环境研究的结果。重力取样器是获取湖泊、水库等水域浅层湖泊沉积物的一种经济有效、操作简单的常用工具。因此研究重力取样器的取样技术对环境研究具有积极的意义。研究了重力取样器的取样技术，并在此基础上成功设计了一种便携式的重力式取样器，非常适合环境研究机构的沉积物取样工作。     

卵砾石地层潜孔锤同心跟管钻具的研究

卵砾石地层是钻探工程中常见的一种典型的不稳定地层。通过分析目前在卵砾石地层的钻进方法，并针对这一地层的特点，提出了潜孔锤同心跟管钻具在该地层中应用的可行性，并分析设计了钻具的原理、结构及特点。结合实验结果，认为潜孔锤同心跟管钻具在卵砾石地层中具有广阔的应用前景。     

用于砾石夹层钻进的新型PDC钻头的研制与使用

无压浸渍工艺生产的PDC石油钻头钻遇砾石夹层不适应。根据砾石夹层砾石坚硬、软硬互层、非均质、研磨性强的特点，研究了新型PDC钻头，在钻头结构上主要采取外抛内锥带辅助切削齿的结构形式，在复合片上主要采用非平面结合方式，即采用双向多条直槽非平面结合。按此方案设计与生产了3只钻头，分别在3口井试用，直接钻穿砾石夹层馆陶组地层井段，钻井效率提高26%，突破了砾石夹层钻进不能使用PDC钻头的禁区。     

等截面单桩抗拔承载性状试验研究

在基坑中对等截面单桩进行了抗拔静载试验，在桩身设置应变式钢筋计，成功测得桩身各截面的应变数据。分析试验所得数据，对试验抗拔桩抗拔系数的取值、侧摩阻力的发挥、混凝土桩身的开裂等进行了探讨，相应给出了抗拔桩的设计建议。