广西中三叠统浊流流向及坡向

通过对广西中三叠统浊积岩系中溢堤流沉积的识别,结合同一鲍马层序Tc段斜层理倾向与其底部槽模走向不一致的分析,以及横向冲刷模、U形障碍冲刷痕等冲蚀构造、大型滑动模等压刻构造的认识,筛选出宽阔水道充填沉积、扇状体及分支水道沉积中底模构造的指向数据,来指示浊流主体流向,并区分出溢堤流流向。从而确定了本区中三叠世时的浊流主体流向为NW向,平均为300°。根据滑塌沉积中滑塌包卷层轴面、滑塌面的测定,确定凤山县金牙处的古坡向平均为322°,与浊流主体流向基本一致。还认为中三叠世时右江盆地沉积物源来自桂东和桂东南蚀源区,海水由其南的越南境内进入。     

Die Entfernung von Cadmiumionen aus Spülwässern der galvanischen Industrie mittels Ionenaustausch

In laboratory investigations with model waters, the behaviour of selected cation-exchange resins (Amberlite 200 C, Duolite C-25, Lewatit S-100, Wofatit KPS and Wofatit KS-10) is tested. The usable volume capacity of the resins in the forms of H, Na and NH₄ as well as the water content and the total volume capacity after 25 cycles of loading/regeneration are determined. It is recommended to use Amberlite 200 C and Wofatit KS-10.     

Generating interface waves using a freely falling, instrumentedsource

In recent years, interface waves such as the Scholte wave have become important tools in the study of the geoacoustic properties of near-bottom seafloor sediments. Traditionally, these waves have been generated by explosive or pneumatic sources deployed at or near the seafloor and monitored by ocean-bottom seismographs or geophone arrays. While these sources generate the requisite interface waves, they also produce higher frequency compressional waves in the water and sediment that tend to contaminate the surface wave and make inversion of the data difficult in the near field. In this paper, a new source consisting of a freely falling projectile instrumented with an accelerometer is described. When the projectile impacts the bottom, the exact time history of the vertical force applied to the sediment is known and therefore may be convolved with the transfer function of a sediment geoacoustic model to produce accurate synthetic seismograms. Moreover, the vertical force applied to the seafloor is very efficient in generating surface wave motion while producing very little compressional wave energy so that the near-field signals are much more easily analyzed. An example of the use of the new source is presented including inversion of the received signals to obtain shear-wave velocity and attenuation as a function of depth in the near bottom sediments at a shallow-water site     

Post-solidification cooling and the age of Io's lava flows

The modeling of thermal emission from active lava flows must account for the cooling of the lava after solidification. Models of lava cooling applied to data collected by the Galileo spacecraft have, until now, not taken this into consideration. This is a flaw as lava flows on Io are thought to be relatively thin with a range in thickness from ∼1 to 13 m. Once a flow is completely solidified (a rapid process on a geological time scale), the surface cools faster than the surface of a partially molten flow. Cooling via the base of the lava flow is also important and accelerates the solidification of the flow compared to the rate for the ‘semi-infinite’ approximation (which is only valid for very deep lava bodies). We introduce a new model which incorporates the solidification and basal cooling features. This model gives a superior reproduction of the cooling of the 1997 Pillan lava flows on Io observed by the Galileo spacecraft. We also use the new model to determine what observations are necessary to constrain lava emplacement style at Loki Patera. Flows exhibit different cooling profiles from that expected from a lava lake. We model cooling with a finite-element code and make quantitative predictions for the behavior of lava flows and other lava bodies that can be tested against observations both on Io and Earth. For example, a 10-m-thick ultramafic flow, like those emplaced at Pillan Patera in 1997, solidifies in ∼450 days (at which point the surface temperature has cooled to ∼280 K) and takes another 390 days to cool to 249 K. Observations over a sufficient period of time reveal divergent cooling trends for different lava bodies [examples: lava flows and lava lakes have different cooling trends after the flow has solidified (flows cool faster)]. Thin flows solidify and cool faster than flows of greater thickness. The model can therefore be used as a diagnostic tool for constraining possible emplacement mechanisms and compositions of bodies of lava in remote-sensing data.     

Mid-infrared observations of methanol maser sites and ultracompact H ii regions: signposts of high-mass star formation

N -band (10.5 μm) and/or Q -band (20.0 μm) images taken with MANIAC on the ESO/MPI 2.2-m telescope are presented for 31 methanol maser sites and 19 ultracompact (UC) H  ii regions. Most of the maser sites and UC H  ii regions are coincident with mid-infrared (MIR) sources to within the positional uncertainties of ∼ 3 arcsec, consistent with the maser emission being powered by the MIR source. The IRAS source positions, however, do not always coincide with the MIR sources.
Based on an average infrared spectral energy distribution, we deduce that the MIR objects are luminous enough that they should also produce a strong ionizing radiation. Some sources are consistent with stars of later spectral type, but not all can be. A number of maser sites show no detectable radio continuum emission associated with MIR emission, despite a powering source luminous enough potentially to produce an UC H  ii region. Since no signs of an UC H  ii region are detected here, these maser sites might be produced during a very early stage of stellar evolution.
We present objects that show evidence of outflow activity stemming from a maser site, exhibiting CO and/or CS line profiles indicative of outflows coincident with the MIR source. These cases are promising examples of maser sites signposting the earliest stages of high-mass star formation.     

利用地震矩张量反演鲜水河断裂带现今运动学特征

本文探讨了利用地震矩反演断裂形变带运动学参数的基本理论和方法，将其初步应用于鲜水河断裂形变带变形分析和运动机制的研究。结果表明，鲜水河断裂带呈现出走向拉伸、倾向压缩的形变格局，由地震矩反演的断裂带剪切形变速率（１０．９ｍｍ／ａ）与用地质学估算方法（１７ｍｍ／ａ）和现今地壳形变测量（８ｍｍ／ａ）的结果相当。同时，反演出的应变主方向能解释鲜水河断裂现今活动分段性特征以及多种滑动方式共存的现状，从而证明该方法是目前研究区域运动学问题切实有效的手段之一。     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

The response of the mid-latitude thermospheric wind to magnetic activity

Observations of the thermospheric wind at a mid-latitude station have been made using a Fabry-Perot interferometer to measure the Doppler shift of the nighttime OI emission at 630 nm. The results from 12 summer nights show that the zonal wind has a distinct feature associated with magnetic activity. The zonal wind first reverses and becomes westward. The maximum strength of the westward wind, its duration, and the maximum strength of the subsequent eastward wind all increase with increasing magnetic activity. The meridional wind is less consistent in its behaviour. It is normally equatorward but during magnetic activity it can increase, decrease, or even reverse, although it is consistently equatorward and of increased strength after 02.00 L.T. The initial reversal of the zonal wind is consistent with changes in the wind expected as a result of convective electric fields penetrating to mid-latitudes indicating that these electric fields modify the mid-latitude wind pattern before effects due to auroral heating reach mid-latitudes. The reversal of the zonal wind back to eastward may also be the result of electric field effects. The large variability of the meridional wind, to the extent that it becomes poleward at times, indicates the importance of wind sources equatorward of the observatory.     

Muon flux at the geographical South Pole

The muon flux at the South Pole was measured for five zenith angles, 0°, 15°, 35°, 82.13° and 85.15° with a scintillator muon telescope incorporating ice Cherenkov tank detectors as the absorber. We compare the measurements with other data and with calculations.