Geotechnical investigation of sewage wastewater disposal sites and use of GIS land use maps to assess environmental hazards: Sohag, upper Egypt

Land application is the only currently available technique for sewage wastewater disposal along the Nile Valley in Upper Egypt. Wastewater disposal projects have been established in the lowland desert zone extending between the cultivated floodplain and the Eocene Limestone plateau. The plan is to use the treated wastewater in irrigating woody farmlands. Some wastewater disposal sites are already operating, and several others will be established in the near future. The proposed wastewater disposal sites are located in a sensitive desert zone that is extremely narrow and situated very close to vital resources including the cultivated floodplain, reclaimed lands, residential areas, and surface water resources. In addition, the subsurface sediments of this zone (Pleistocene sand–gravel succession) constitute a significant part of the Quaternary aquifer of the valley. The objective of this study is to characterize and investigate the wastewater disposal sites and assess their probable environmental hazards. The study showed that the available lands are insufficient to accommodate the projected quantities of wastewater. At the currently operating sites, excess raw wastewater is accumulating on the ground surface forming large uncontrolled ponds. Such wastewater ponds represent a potential environmental hazard and might cause disastrous health effects, where chemical and bacteriological pollution of soil, crops and water resources may occur.     

Assessment of physico-chemical and microbiological surface water quality using multivariate statistical techniques: a case study of the Wadi El-Bey River,Tunisia

Located in the northeastern part of Tunisia, Wadi El Bey drains the watershed through farmland, industrial, and urban areas of the region. It serves to discharge treated wastewater of different types. In this work, the variations of the water quality of Wadi El Bey were studied and evaluated, during 2 years (2012–2013), using multivariate statistical techniques such as principal component analysis (PCA) and cluster analysis (CA). In addition, the similarities or dissimilarities among the sampling points were as well analyzed to identify spatial and temporal variations. The results obtained based on the cluster analysis, led to identify three similar water quality zones: relatively polluted (LP), moderately polluted (MP), and highly polluted (HP). The inorganic and organic parameters, temperature, conductivity, dissolved oxygen, chemical oxygen demand, salmonella, and enterococcus, seemed to be the most significant parameters of water quality. Three factors were identified as responsible for the data structure, explaining 60.95% of the total variance. The first factor is the physical and non-organic chemical parameters explaining 23.48% of the total variance. The second and third factors are, respectively, the microbiological (21.26%) and organic-nutrient (16.2%).This study shows that multivariate statistical methods can help the water managers to understand the factors affecting the water quality.     

Evolution of Pleistocene travertine depositional system from terraced slope to fissure-ridge in a mixed travertine-alluvial succession (Jebel El Mida,Gafsa, southern Tunisia)

The Quaternary stratigraphic record of Jebel El Mida, composed of continental deposits, is a useful example of concomitant travertines and alluvial deposition in an extensional setting. Travertine deposition occurred in a faulted Pleistocene alluvial fan giving rise to seven (recognised) facies interfingering with five other alluvial ones. The travertine depositional events indicate a tectonically driven evolution from terraced slope (facies group FC1–FC6) to a travertine fissure ridge-type depositing phase (facies group of FC1–FC7). Interfingering between travertine and alluvial facies indicates the co-existence of adjacent and time-equivalent depositional environments. The travertine deposition resulted from deep origin hydrothermal fluids channelled along damaged rocks volumes associated to a regional fault system, named as the Gafsa Fault (GF). The travertine–terrigenous succession in Jebel El Mida highlights the major role played by the GF in controlling: (i) the hydrothermal fluid flow, still active as also indicated by the numerous thermal springs aligned along the fault zone; (ii) paleoflow directions, discharge locations, volume, rate and fluctuations of the water supply. The paleoclimatic correlation with adjacent localities reveals that, at that time, humid episodes could have contributed to the recharge of the hydrothermal system and to the deposition of alluvial sediments.     

Geomorphic and lithologic characteristics of Wadi Feiran basin,southern Sinai,Egypt, using remote sensing and field investigations

Wadi Feiran is an important drainage basin in southern Sinai Peninsula covering an area of about 1785 \(\hbox {km}^{2}\), its streams drain into the Gulf of Suez crossing variety of rocks and sedimentary units varied in age from Precambrian to Quaternary. Field investigations, geographic information systems (GIS) and remote sensing studies including Landsat-7 ETM+, Radarsat-1, and SRTM DEM were integrated to reveal its lithologic, geologic and geomorphic features. Besides the field investigations, rock units including basement and pre- and syn-rift sedimentary units were discriminated using band ratios and principal component analysis techniques (PCA). Such techniques revealed that the crystalline rocks covering W. Feiran are unaltered rocks lacking OH-bearing minerals. Radar data successfully displayed the structures and geomorphic features related to topography. Moreover, the techniques allowed the extraction of the dyke-like structures along faults and shear zones. This also characterized the topographic variations through analysis of the shaded terrain and the altitudinal profiles. The results of data integration, lineament analysis and lineament density maps revealed that the structural grain in the present study has four different trends: N20–45E, N30–45W, N–S and E–W. Based on analysis of radar data and geomorphic indices, W. Feiran is an asymmetrical basin, its left side occupies \(\sim \)34% of the total area that leads to a supposedly massive tilt towards the south which caused the southwestward slope.     

High pressure deformation in two-phase aggregates

We investigate the rheological behavior of multi-phase aggregates at high pressure and high temperature. Using synchrotron X-ray radiation as the probing tool, we are able to quantify the stress state of individual phases within the aggregates. This method provides fundamental information in interpreting the behavior of two phase/multi-phase mixtures, which contribute to our understanding of the deformation process at deep earth conditions. We choose MgAl₂O₄ spinel and MgO periclase as our model materials. Mixtures of various volume proportions were deformed in a multi-anvil high pressure deformation apparatus at pressure of 5 GPa and elevated temperatures. Stress is determined from X-ray diffraction, providing a measure of stress in each individual phase of the mixture in situ during the deformation. Macroscopic strain is determined from X-ray imaging. We compare the steady state strength of various mixtures at 1000 °C and 800 °C and at the strain rate in the range of 1.8 to 8.8 × 10^− 5 s^− 1. Our data indicate that the weak phase (MgO) is responsible for most of the accumulated strains while the strong phase (spinel) is supporting most of the stress when the volume proportion is 75% spinel and 25% MgO. The intermediate compositions (40/60) are much weaker than either of the end members, while the grain sizes for the intermediate compositions (submicrons) are much smaller than the end members (5–10 μm). We conclude that a change in flow mechanism resulting from these smaller grains is responsible for the low strength of the intermediate composition mixtures. This study demonstrates an approach of using synchrotron X-rays to study the deformation behaviors of multi-phase aggregates at high pressure and high temperature.     

Rare earth elements in modern coral sands: an environmental proxy

The concentration rare earth elements and Yttrium (REE + Y) were determined in coral sands from Kavaratti Island, Arabian Sea, India. Chondrite-normalized REE + Y patterns show: (1) high REE concentration particularly light REE (LREE) enrichment; (2) consistent negative Ce anomaly; (3) nearly chondritic Y/Ho ratios. All these features are consistent with the geochemistry of well oxygenated seawater with significant terrestrial contribution. The seawater composition of Nd/Yb ratio inferred from the coral record point to the dominance of LREE more than the heavy REE (HREE). The high terrestrial input rich in LREE and property of adsorption/scavenging processes of LREE than that of HREE may be the cause. Terrigenous contributions were detected on the basis of co-occurring trace element concentrations (Sc, Hf and Th) and Y/Ho ratio. Except for La, the REE distribution coefficients, KD(REE)s, are between 100 and 300. KDs are high comparing to the other elements in biogenic calcite which is attributed to detrital contamination during elemental incorporation. This study may not reflect original seawater chemistry but it can be a good proxy to indicate proximity of corals to terrigenous input sources.     

Biostratinomy and facies analysis of the upper Cretaceous oyster storm shell beds of the Duwi formation, Qusseir District, Red Sea Region, Egypt

The Maastrichtian oyster Lopha villei (Coquand) occurs abundantly in the upper part of the Duwi Formation in the Red Sea region, Egypt. It forms thin undulating sharp-based shell beds that comprise both reclining and encrusting morphotypes of Lopha villei. Bed-by-bed biostratinomic and facies analyses of these shell beds confirm their shallow marine origin and formation by storm events. A tempestite model, explaining the mode of formation and the idealized sequence of events of such storm shell beds, has been inferred.     

Drought risk assessment using remote sensing and GIS techniques

Beginning with a discussion of drought definitions, this review paper attempts to provide a review of fundamental concepts of drought, classification of droughts, drought indices, and the role of remote sensing and geographic information systems for drought evaluation. Owing to the rise in water demand and looming climate change, recent years have witnessed much focus on global drought scenarios. As a natural hazard, drought is best characterized by multiple climatological and hydrological parameters. An understanding of the relationships between these two sets of parameters is necessary to develop measures for mitigating the impacts of droughts. Droughts are recognized as an environmental disaster and have attracted the attention of environmentalists, ecologists, hydrologists, meteorologists, geologists, and agricultural scientists. Temperatures; high winds; low relative humidity; and timing and characteristics of rains, including distribution of rainy days during crop growing seasons, intensity, and duration of rain, and onset and termination, play a significant role in the occurrence of droughts. In contrast to aridity, which is a permanent feature of climate and is restricted to low rainfall areas, a drought is a temporary aberration. Often, there is confusion between a heat wave and a drought, and the distinction is emphasized between heat wave and drought, noting that a typical time scale associated with a heat wave is on the order of a week, while a drought may persist for months or even years. The combination of a heat wave and a drought has dire socio-economic consequences. Drought risk is a product of a region’s exposure to the natural hazard and its vulnerability to extended periods of water shortage. If nations and regions are to make progress in reducing the serious consequences of drought, they must improve their understanding of the hazard and the factors that influence vulnerability. It is critical for drought-prone regions to better understand their drought climatology (i.e., the probability of drought at different levels of intensity and duration) and establish comprehensive and integrated drought information system that incorporates climate, soil, and water supply factors such as precipitation, temperature, soil moisture, snow pack, reservoir and lake levels, ground water levels, and stream flow. All drought-prone nations should develop national drought policies and preparedness plans that place emphasis on risk management rather than following the traditional approach of crisis management, where the emphasis is on reactive, emergency response measures. Crisis management decreases self-reliance and increases dependence on government and donors.     

Skin friction behavior of pile fully embedded in limestone

Pile foundation system in limestone rock layers is commonly used in Riyadh area, Saudi Arabia, for high-rise building, bridges, and other structures. Especially in Riyadh region, bored piles are used for bridges and underpasses not only because of bearing capacity but mainly because of limited spaces for using shallow foundations. In addition, piles are used for bridges over wadis to avoid scouring effects. The loads are transferred by the pile from a superstructure to the rock strata through side friction and end-bearing resistance. However, there are no studies conducted in Riyadh area to quantify the skin friction capacity of pile embedded in limestone rock. Accordingly, this experimental study describes in details the behavior of load transfer mechanism through side friction only on a reinforced concrete pile (75 mm diameter and 150 mm long) constructed on hard limestone rock sample. Soft material (Styrofoam) was placed at the bottom of the pile to eliminate the effect of end-bearing resistance. Unconfined compression test was conducted on intact rock sample to find out the properties of the rock used. The result of the ultimate side friction obtained from the test was compared with values predicted by other researcher methods mentioned in the literature.     

Sedimentological and geoenvironmental evaluation of the coastal area between Al-Khowkhah and Al-Mokha,southeastern Red Sea,Republic of Yemen

The increasing anthropogenic activities (e.g., constructing touristic resorts) have led to notable changes in the Yemeni Red Sea coastal regions. In this context, recent sediments have been investigated to infer possible natural and man-induced processes on these coastal areas. The target area lies between longitudes 43°13′–43°30′E and latitudes 13°15′–13°55′N. It extends about 90 km along the coastline as a part of the Tihama plain. Geomorphologically, it forms a long-curved stretch with pronounced headlands, embayments and bays. Generally, it is covered by recent sediments (wadi, lagoon, beach and spit deposits along with sabkha, coastal dunes and mangrove). Textural studies reveal that most of the studied sediments are mainly poorly to moderately sorted and are composed mainly of sandy fractions with few gravel and mud, mostly bimodal with minor unimodal patterns. The igneous (granites) as well as basic (basalt, andesite and andesitic pyroclastics) and acidic (dacite and rhyolite) volcanic rocks of Tertiary age, which are exposed to the east of the study area, are believed to be the source of pyroxenes, amphiboles, epidotes, biotite, sphene, zircon, tourmaline and rutile, in a decreasing order of abundance. Moreover, smectite, kaolinite, chlorite, illite and palygorskite are the predominant clay minerals, mainly of detrital origin. The total carbonate content fluctuates from 37.41% (lagoon sediments) to 53.74% (sabkha sediments). The high amount of sea grasses, which covers the tidal flat zone and relates to the fine-grained sediments, accounts for the high organic matter content. The mineralogy of the source rocks has controlled the general distribution of major elements (Fe, Mg, Na, K and Mn) in the beach sediments. In such sediments, the concentrations of the heavy metals (Cu, Zn, Cd, Ni, Pb and Co) may reflect the sediment pollution using different approaches. The enrichment factors (EFs) of the trace metals for most samples reveal values that are greater than 1, referring to three groupings, which are: moderate to moderately severe (Zn, Cu and Mn), minor to moderate (Pb and Co) and zero to minor (Cd and Ni) enrichment. The EFs for Pb, Cd, Ni and Co metals (<5) may be attributed to the crustal materials and/or natural weathering processes. But, those for Zn, Cu and Mn (>5), especially in Al-Khowkhah–Abu-Zahr, Moushij–Zahari–Ruays, Yokhtol and Mokha localities, are possible of anthropogenic contributions.