Distribution of heavy metals in the core sediments of a tropical wetland system

Five sediment cores from the fresh water region of the Vembanad wetland system were studied for the trace element contents The average concentration of iron, manganese, nickel, copper, zinc, cadmium, lead, mercury and chromium were determined. The core samples were collected using gravity type corer, digested with a mixture of nitric acid and perchloric acid and analyzed by atomic absorption spectrophotometry. Heavy metals such as iron, copper, nickel and zinc reported enrichment towards the surface of the core sediment sample collected from the centre of the lake. Lead, cadmium and mercury showed uniform distribution through out the core. Quality of the sediments were evaluated based on sediment quality guidelines, pollution load index, sum of toxic units and with effect range low/effect range median and threshold effect level/probable effect level values of Environmental Protection Agency guidelines. The degree of contamination for each station was determined. The concentration of different heavy metals has been compared with the world average concentration of shale values. Results of the analysis showed that Vembanad lake is facing serious metal pollution with increased rate of deposition.     

Dynamics of Saxothuringian subduction channel/wedge constrained by phase‐equilibria modelling and micro‐fabric analysis

Subduction and exhumation dynamics can be investigated through analysis of metamorphic and deformational evolution of associated high‐grade rocks. The Erzgebirge anticline, which forms at the boundary between the Saxothuringian and Teplá‐Barrandian domains of the Bohemian Massif, provides a useful study area for these processes owing to the occurrence of numerous meta‐basites preserving eclogite facies assemblages, and coesite and diamond bearing quartzofeldspathic lithologies indicating subduction to deep mantle depths. The prograde and retrograde evolution of meta‐basite from the Czech portion of the Erzgebirge anticline has been constrained through a combination of thermodynamic modelling and conventional thermobarometry. Garnet growth zoning indicates that the rocks underwent burial and heating to peak conditions of 2.6 GPa and at least 615 °C. Initial exhumation occurred with concurrent cooling and decompression resulting in the growth of amphibole and zoisite poikiloblasts overgrowing and including the eclogite facies assemblage. The development of clinopyroxene–plagioclase–amphibole symplectites after omphacite and Al‐rich rims on matrix amphibole indicate later heating at the base of the lower crust. Omphacite microstructures, in particular grain size analysis and lattice‐preferred orientations, indicate that the prograde evolution was characterized by a constrictional strain geometry transitioning into plane strain and oblate fabrics during exhumation. The initial constrictional strain pattern is interpreted as being controlled by competing slab pull and crustal buoyancy forces leading to necking of the subducting slab. The transition to plane strain and flattening geometries represents transfer of material from the subducting lithosphere into a subduction channel, break‐off of the dense slab and rebound of the buoyant crustal material.     

Unique isoprene oxidation products demonstrate chlorine atom chemistry occurs in the Houston,Texas urban area

As part of the 2000 Texas Air Quality Study (TexAQS), we studied the isoprene oxidation process under ambient conditions to discern the presence of chlorine atom (Cl) chemistry in the Houston, Texas urban area. By measuring chloromethylbutenone (CMBO) and an isomer of chloromethylbutenal (CMBA), we clearly observed sixteen episodes of active Cl chemistry during the 24-day experiment. Estimated median Cl concentration during each of these episodes was between the detection limit of ~10² atoms cm⁻³ and 50 _{- 30} ^{+ 70} ×10⁴ 50_{ - 30}^{ + 70} \times {10^4} atoms cm⁻³. Cl concentration during all the episodes averaged 7.6 _{- 2.0} ^{+ 4.7} ×10⁴ 7.6_{ - 2.0}^{ + 4.7} \times {10^4} atoms cm⁻³ and thus amounted to less than 3% of the OH concentration during the same periods. During the episodes, the fraction of oxidation chemistry initiated by Cl ranged from 3–43% and was strongly dependent on the quantity and type of hydrocarbons present in the atmosphere. Because of its intermittent presence and low concentration, Cl is not a broadly influential oxidant in the Houston, Texas urban area.     

The influence of human activity in the Arctic on climate and climate impacts

Human activities in the Arctic are often mentioned as recipients of climate-change impacts. In this paper we consider the more complicated but more likely possibility that human activities themselves can interact with climate or environmental change in ways that either mitigate or exacerbate the human impacts. Although human activities in the Arctic are generally assumed to be modest, our analysis suggests that those activities may have larger influences on the arctic system than previously thought. Moreover, human influences could increase substantially in the near future. First, we illustrate how past human activities in the Arctic have combined with climatic variations to alter biophysical systems upon which fisheries and livestock depend. Second, we describe how current and future human activities could precipitate or affect the timing of major transitions in the arctic system. Past and future analyses both point to ways in which human activities in the Arctic can substantially influence the trajectory of arctic system change.     

Water renewal estimates for aquaculture developments in the Richibucto estuary,Canada

Water renewal in semi-enclosed coastal areas is crucial for the supply of oxygen and seston and for the removal of organic loadings from finfish or shellfish aquaculture sites. Water renewal depends on hydrodynamic processes and can have a complex spatial distribution due to irregular topographic features. This study describes some physical oceanography observations gathered in the Richibucto estuary, New Brunswick, Canada, and provides an estimate of the spatial distribution of water renewal in the North Arm, a location in the estuary where the largest American oyster (Crassostrea virginica) aquaculture operation in eastern Canada is located. The estuary changes from a well mixed estuary to a partially stratified estuary depending on runoff conditions. Tides are mixed but mainly diurnal due to the nearby presence of the second M₂ amphidromic point in the Gulf of St. Lawrence. Tidal amplitudes vary from 0.3 to 0.6 m and show a slight increase some 35 km upstream. Currents in the main channel can reach over 0.60 m s⁻¹ during ebb and 0.3 m s⁻¹ during flood, with a slack water period of approximately 8 h. Low frequency sea level fluctuations have a range of 0.5 m at the mouth and are coherent within the estuary. Hydrodynamic and advection-dispersion models are used to calculate the spatial distribution of the local renewal time (LRT) in the North Arm for high and low freshwater discharge conditions, using the dissolved tracer method. Results show that the LRT varies from less than 5 d at the downstream end of the North Arm to over 100 d further upstream. When averaged over the entire North Arm, the integral renewal time (IRT) is estimated to vary only from 8 to 21 d depending on the season. The LRT and IRT estimates are major improvements over conventional renewal estimates using tidal prism methods.     

A SPATIALLY-VARYING PARAMETER MODEL OF AFDC PARTICIPATION: EMPIRICAL ANALYSIS USING THE EXPANSION METHOD*

Spatial variation in the importance of determinants of participation in the Aid to Families with Dependent Children program (AFDC) is investigated for the U.S. Casetti's Expansion Method is applied to the two-dimensional space domain by making the model's parameters a function of state x–y centroids. The spatially-varying parameter model suggests that the black population's association with participation is lowest in the Southeast and Northwest and greatest in the Southwest and Northeast.     

Simulation of scree‐slope dynamics: investigating the distribution of debris avalanche events in an idealized two‐dimensional model

We present a two‐dimensional model of the development of scree slopes using the discrete‐element method. We concentrate on the dynamics of the accumulating debris at the cliff foot rather than on the failure modes of the cliff‐face or shape of the underlying rock surface. The evolution of this unconsolidated material is intermittent and systematically changing over time, with an early high disturbance regime, dominated by a characteristic event size (where 65% of particles in the debris are in motion to some extent), replaced at later times by many shallow slides interspersed with infrequent large events that involve motion through almost the full scree depth. These large slides lead to a stratigraphy in which the layers of material are stretched almost horizontal near the base of the slope. The scree surface thus shows a gradient in age with most recent rock‐fall close to the cliff and the oldest rock‐fall debris outcropping at the foot. The final surface slope tends to show little curvature, and the final mean slope is well correlated with the angle of internal friction of the particles, although the change is very small over a wide range of friction angles [final slope (in degrees relative to horizontal) ~ 0.043 × internal friction angle + 17.49, with a correlation coefficient of 0.89, p‐value 0.0001]. Some weak size‐segregation of the debris is found, but this seems to have little to do with individual particles bounding down the slope. The shape of the rock core agrees largely with the analytic forms given by Fisher–Lehmann and Bakker–Le Heux expressions, but the original simple Fisher quadratic can give the best fit. Overall the evolution shows a remarkable insensitivity to the model parameters, suggesting that the controls on dry scree‐slope evolution are primarily geometric in character. Copyright © 2014 John Wiley & Sons, Ltd.     

The origin and response of zircon in eclogite to metamorphism during the multi-stage evolution of the Huwan Shear Zone,China: Insights from Lu–Hf and U–Pb isotopic and trace element geochemistry

The Huwan Shear Zone (HSZ) is an eclogite bearing transpressive wrench zone located along the Shangdan Suture that juxtaposes the Paleozoic Qinling and Mesozoic Hong'an–Dabie orogenic terrains. The region preserves a complex history that bridges the gap between adjacent orogenic terrains. Simultaneous in-situ trace element, U–Th–Pb and Lu–Hf‐isotope analysis of zircon grains from samples of the Xiongdian and Sujiahe eclogite identify a late Carboniferous to early Permian period of high pressure metamorphism, ca. 283 to 306 Ma. Zircon grains are observed to respond to metamorphic overprint via a two stage process: (1) An initial prograde stage of fluid catalyzed interface coupled dissolution–reprecipitation, involving exsolution of a non-ideal solid solution thorite (ThSiO₄) end member and loss of highly incompatible components (LREE and Pb), (2) A second stage of coupled zircon dissolution, coarsening, and new rim growth in equilibrium with garnet at high pressure conditions.We identify Proterozoic whole rock Sm–Nd and zircon grain Lu–Hf isotopic evidence which challenges the traditional interpretation that the Xiongdian and Sujiahe eclogite formed in response to early Paleozoic mantle melting and oceanic crust generation. We argue the Huwan Shear Zone contains no conclusive evidence of early/middle Paleozoic oceanic crust, but rather Proterozoic crustal components analogous to those found in the Northern Qinling Terrain and associated with formation of the Shangdan Suture. We present a simpler geodynamic model involving continuous convergence and accretion of terrains onto the southern margin of the North China Block during the Paleozoic Qinling and Mesozoic Dabie orogenies.