苏北盆地泰州组砂岩成岩序列和储集层质量主控因素分析?

基于53口井310余块储集层砂岩样品的分析研究,指出泰州组储集层存在着压实(压溶)、胶结和溶蚀等成岩作用,但在不同位置成岩作用的表现有所不同。海安凹陷以胶结和溶蚀作用为主,压实与压溶作用不太明显;高邮凹陷的压实程度较海安凹陷强烈。压实作用使得高邮凹陷泰州组储集层孔隙度在2 400～2 800 m处于10%左右,而海安凹陷为10%～20%。海安凹陷和高邮凹陷泰州组储集层目前处于中成岩阶段A期。储集层质量主要受原始沉积环境和成岩作用的综合影响。压实作用和胶结作用均可降低孔隙,但当碳酸盐胶结物含量小于15％时,胶结作用对储集层质量影响较小。碳酸盐胶结物和长石颗粒溶蚀形成了大量的粒间溶孔。海安凹陷有利储集层主要分布在西北部和东部三角洲前缘砂体和滑塌浊积扇砂体中,高邮凹陷有利储集层主要分布在南部扇三角洲前缘砂体中。     

顾及DEM误差自相关的坡度计算模型精度分析

基于DEM的坡度计算,其误差来源于DEM误差、DEM结构和坡度计算模型。在顾及DEM误差自相关的前提下,对四种DEM坡度计算模型进行了分析和评价。研究表明,三阶不带权差分能给出较高的坡度计算精度;在局部窗口中,格网点数量越多,坡度计算越准确;等权比不等权的坡度计算模型更准确;DEM误差自相关结构形式对坡度计算无影响。进一步的理论分析和试验分析还表明：DEM误差自相关性的存在,不仅能够改善地形分析的精度,也能改善DEM自身精度。     

Spatial distribution features and environment effect of heavy metal in intertidal surface sediments of Guanhe estuary, Northern Jiangsu Province

In northern Jiangsu coastal zone area, Guanhe River is the biggest river and has the best navigation conditions among rivers which flow into the Yellow Sea. The grain sizes show gradual increase from the high intertidal zone to lower intertidal zone. The heavy metal values have slight changes along both sides of the river mouth, but show an evident change perpendicular to the tidal flat. In the latter case, they show a good correlation with grain size fluctuation, that is, the heavy metal values gradually decline when the grain size increases from the high intertidal zone to the lower intra-tidal zone. Analyses of the heavy metal elements show that on the Guanhe estuary surface sediment, the content of the elements Hg, As and Cu is above background values; Pb and Zn contents are rather close to the background values; and Cd content is less than the background values. The element Hg comes out to be harmful in a medium level to ecological environment, while the elements of Cr, As, Cu, Pb, Zn and Cd fall in a safe range of MPL. On the whole, Guanhe estuary tidal flat is not very harmful to the ecology in terms of the heavy metals. __________ Translated from Marine Geology & Quaternary Geology, 2007, 27(5): 23–32 [译自: 海洋地质与第四纪地质]     

扬州市6－7月份天气预报服务业务化系统

从地（市）级气象台的业务工作出发,试图建立通过微机实现的对上接收信息、对外预报服务、对下预报指导的三位一体的天气预报服务业务化系统,以发挥地（市）级气象台在经济建设和防灾减灾中的作用,推动天气预报和服务的现代化建设,把基层气象工作推向一个新的台阶。     

矿产预测中成矿信息的提取和强化

成矿信息的提取是矿产预测的重要手段,其方法的有效性直接影响到预测成果的可靠性。在成矿规律研究的基础上,有意识地干预模型的构成,突出与成矿有关的信息;抑制某些成矿意义不明显和属干扰的信息,有目的地使模型向反映成矿信息的方向逼近,提高模型与矿床实际赋存地质环境的吻合程度,均是成矿信息提取和强化的内涵。本文从研究实践中总结了先验约束模型和非先验约束模型的强化方法,在新疆阿勒泰地区的地质－找矿工作中已取得     

新疆地震预报研究

新疆的地震预报是1970年开始的。二十多年来在“边观测、边研究、边预报”、“多路探索、多兵种联合作战”、“走综合预报之路”的方针指导下取得了长足的进展。建设了43个地震台站,投入189套仪器,建成了遍布全疆的地震无线通讯网,开展了历史地震调查和地震烈度区划工作,建立健全了地震会商预报制度,进行了多方面的地震预报研究。实际地震预报统计分析表明,扣除自然发震概率之后,趋势预报的成功率约0.3,短临预报的成功率约0.1。在前兆台网控制范围内取得了一些震例,说明地震确实是有前兆的,但又是非常复杂的。地震预报作为科学难题还有漫长的路要走。作者简要地讨论了地震观测的间接性和地震异常的离散性、难以区别的地震异常和地壳变动异常、建立在复杂现象基础上的地震前兆以及地震的混沌性对地震预报的影响等科学问题。     

Characteristics of afferent activity of ampullary electroreceptors in catfish Parasilurus asotus

The spontaneous and evoked activity of electroreceptors were electrophysiologically studied. The results are:

Two-dimensional pH distributions and dynamics in bioturbated marine sediments

The seafloor is the site of intense biogeochemical and mineral dissolution-precipitation reactions which generate strong gradients in pH near the sediment-overlying water interface. These gradients are usually measured in one-dimension vertically with depth. Two-dimensional pH distributions in marine sediments were examined at high resolution (65 × 65 μm pixel) and analytical precision over areas of ∼150 to 225 cm² using a newly developed pH planar fluorosensor. Dramatic three-dimensional gradients, complex heterogeneity, and dynamic changes of pH occur in the surficial zone of deposits inhabited by macrofauna. pH can vary by ±2 units horizontally as well as vertically over millimeter scales. pH minima zones often form in association with redoxclines within a few millimeters of inner burrow walls, and become more pronounced with time if burrows remain stable and irrigated for extended periods. Microenvironmental pH minima also form locally around decaying biomass and relict burrow tracks, and dissipate with time (∼5 d). H⁺ concentrations and fluxes in sandy mud show complex acid-base reaction distributions with net H⁺ fluxes around burrows up to ∼12 nmol cm⁻² d⁻¹ and maximum net reaction rates varying between −90 (consumption) to 120 (production) μM d⁻¹ (∼90 nmol cm⁻¹ d⁻¹ burrow length). Acid producing zones that surround irrigated burrows are largely balanced by acid titration zones along inner burrow walls and outer radial boundaries. The geometry and scaling of pH microenvironments are functions of diagenetic reaction rates and three-dimensional transport patterns determined by sediment properties, such as diffusive tortuosity, and by benthic community characteristics such as the abundance, mobility, and size of infauna. Previously, undocumented biogeochemical phenomena such as low pH regions associated with in-filled relict biogenic structures and burrowing tracks are readily demonstrated by two-dimensional and time-dependent images of pH and sedimentary structure.     

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.     

Comparison of methods to model the gravitational gradients from topographic data bases

A number of methods have been developed over the last few decades to model the gravitational gradients using digital elevation data. All methods are based on second-order derivatives of the Newtonian mass integral for the gravitational potential. Foremost are algorithms that divide the topographic masses into prisms or more general polyhedra and sum the corresponding gradient contributions. Other methods are designed for computational speed and make use of the fast Fourier transform (FFT), require a regular rectangular grid of data, and yield gradients on the entire grid, but only at constant altitude. We add to these the ordinary numerical integration (in horizontal coordinates) of the gradient integrals. In total we compare two prism, two FFT and two ordinary numerical integration methods using 1" elevation data in two topographic regimes (rough and moderate terrain). Prism methods depend on the type of finite elements that are generated with the elevation data; in particular, alternative triangulations can yield significant differences in the gradients (up to tens of Eötvös). The FFT methods depend on a series development of the topographic heights, requiring terms up to 14th order in rough terrain; and, one popular method has significant bias errors (e.g. 13 Eötvös in the vertical–vertical gradient) embedded in its practical realization. The straightforward numerical integrations, whether on a rectangular or triangulated grid, yield sub-Eötvös differences in the gradients when compared to the other methods (except near the edges of the integration area) and they are as efficient computationally as the finite element methods.