GPS signal acquisition using the repeatability of successive code phase measurements

This paper introduces a new method for GPS signal acquisition, which is based on the repeatability of successive code phase measurements and the M-of-N search algorithm. The performance of the proposed method in terms of probability of signal detection is similar to that of traditional methods, except that the calculation of the probability of detection does not rely on the noise distribution or the Carrier-to-Noise ratio (C/N₀). The code phase repeatability-based method is presented along with equations for probability of detection and probability of false detection. If the distribution of the noise is known, it also provides an estimate of the C/N₀. The proposed method is illustrated for coherent and non-coherent acquisition and C/N₀ estimation.     

Objective prism survey of qsos in the field centered at 10h40m + 00°00′

QSO objective prism survey was done for the field centered at 10^h40^m + 00°00. For the 348 objects selected, we present in this paper their positions,B _J magnitudes, spectra, and finding charts. Based on the sample containing 163 QSO candidates with higher reliabilities (F 3), the surface density of QSO candidates withB _J 20 is estimated to be about 4.5 per square degree.Work based on UKST plates.     

钾霞石制备体系碱性滤液的利用技术

为处理钾长石水热制备钾霞石所产生的碱性滤液,本文采用水热法,考察了氢氧化铝溶解时间、晶化时间、晶化温度、水碱比对钾霞石产率和白度的影响,并对合成钾霞石物相进行了表征。结果表明,合成钾霞石的最佳条件为,氢氧化铝溶解时间为1.5 h,晶化时间为4 h,晶化温度280℃,水碱比为1.8。XRD结果表明,产物为钾霞石粉体。傅里叶变换红外光谱表明,Al(OH)₃中的Al在水热条件下进入到Si—O骨架中形成了Si—O—Al官能团,从而印证了钾霞石的合成。差热分析结果表明,合成钾霞石具有良好的热稳定性。氮气吸附结果表明,合成钾霞石比表面积为5.18 m²/g,平均孔径为32.98 nm。实现了钾长石水热制备钾霞石所剩碱性滤液的资源化利用,并为钾长石水热制备钾霞石提供了一种母液循环的思路,使水热制备钾霞石工业化成为一种可能。     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

参数的期望估计及其在形变分析中的应用

利用“参数的期望估计”能准确定位、定量粗差及参数的期望估计不受粗差影响折特殊性质,寻找地壳变形区域和不变形区域,以确定拟稳点,进而进行拟稳变换,分析地菜变,将是一种有效方法。     

Comparison of methods to model the gravitational gradients from topographic data bases

A number of methods have been developed over the last few decades to model the gravitational gradients using digital elevation data. All methods are based on second-order derivatives of the Newtonian mass integral for the gravitational potential. Foremost are algorithms that divide the topographic masses into prisms or more general polyhedra and sum the corresponding gradient contributions. Other methods are designed for computational speed and make use of the fast Fourier transform (FFT), require a regular rectangular grid of data, and yield gradients on the entire grid, but only at constant altitude. We add to these the ordinary numerical integration (in horizontal coordinates) of the gradient integrals. In total we compare two prism, two FFT and two ordinary numerical integration methods using 1" elevation data in two topographic regimes (rough and moderate terrain). Prism methods depend on the type of finite elements that are generated with the elevation data; in particular, alternative triangulations can yield significant differences in the gradients (up to tens of Eötvös). The FFT methods depend on a series development of the topographic heights, requiring terms up to 14th order in rough terrain; and, one popular method has significant bias errors (e.g. 13 Eötvös in the vertical–vertical gradient) embedded in its practical realization. The straightforward numerical integrations, whether on a rectangular or triangulated grid, yield sub-Eötvös differences in the gradients when compared to the other methods (except near the edges of the integration area) and they are as efficient computationally as the finite element methods.     

FORMOSAT-3/COSMIC science mission update

The FORMOSAT-3/COSMIC mission is a microsatellite mission for weather forecast, climate monitoring, and atmospheric, ionospheric and geodesy research. This mission is a collaborative Taiwan-USA science experiment to deploy a constellation of six microsatellites in low Earth orbits. The mission life is 2 years with a goal of 5 years. The final mission orbit has an altitude of 750–800 km. Each satellite consists of three science payloads: global positioning system (GPS) occultation experiment (GOX) payload, tiny ionospheric photometer (TIP) and tri-band beacon (TBB). The GOX will collect the GPS signals for the study on atmosphere, ionosphere, and geodesy. The TIP and TBB can provide the electron distribution information for ionospheric research. The deployment of the FORMOSAT-3 constellation and the resulting influence on the occultation sounding distributions are reported. Details are also given on GOX, TIP, and TBB payload operations and the contributions of the Taiwan Science Team.     

Annual amphidromes: a common feature in the ocean?

The scientific term "amphidrome" is usually associated with tides in oceanography. The dozen tidal amphidromes observed in the ocean are critical points that determine the fundamental pattern of the global tidal system. Exploration of recently available satellite data with an unprecedented 1-2 decades duration suggests that an amphidrome is not a tide-only phenomenon in the ocean. Analysis of altimeter-derived sea level anomaly (SLA) data and radiometer-derived sea surface temperature (SST) data allows ten amphidromic points to be clearly identified in annual SLA and SST variations. These amphidromes are located in the tropical areas of the Pacific, Atlantic, and Indian oceans. Their existence implies that the annual cycle (in time) of the atmosphere-ocean system is translated into a rotary variation (in space) for many of the geophysical parameters. It can be concluded that annual amphidromes are common, the knowledge of which is of particular interest, given their annually "constant" nature, for the monitoring and understanding of oceanic, climatic, as well as biological variabilities at seasonal to decadal scales, which strongly affect many aspects of the natural and societal activities on the globe.     

Effects of detailed soil spatial information on watershed modeling across different model scales

Hydro-ecological modelers often use spatial variation of soil information derived from conventional soil surveys in simulation of hydro-ecological processes over watersheds at mesoscale (10–100 km²). Conventional soil surveys are not designed to provide the same level of spatial detail as terrain and vegetation inputs derived from digital terrain analysis and remote sensing techniques. Soil property layers derived from conventional soil surveys are often incompatible with detailed terrain and remotely sensed data due to their difference in scales. The objective of this research is to examine the effect of scale incompatibility between soil information and the detailed digital terrain data and remotely sensed information by comparing simulations of watershed processes based on the conventional soil map and those simulations based on detailed soil information across different simulation scales. The detailed soil spatial information was derived using a GIS (geographical information system), expert knowledge, and fuzzy logic based predictive mapping approach (Soil Land Inference Model, SoLIM). The Regional Hydro-Ecological Simulation System (RHESSys) is used to simulate two watershed processes: net photosynthesis and stream flow. The difference between simulation based on the conventional soil map and that based on the detailed predictive soil map at a given simulation scale is perceived to be the effect of scale incompatibility between conventional soil data and the rest of the (more detailed) data layers at that scale. Two modeling approaches were taken in this study: the lumped parameter approach and the distributed parameter approach. The results over two small watersheds indicate that the effect does not necessarily always increase or decrease as the simulation scale becomes finer or coarser. For a given watershed there seems to be a fixed scale at which the effect is consistently low for the simulated processes with both the lumped parameter approach and the distributed parameter approach.     

胶莱盆地含金建造地球化学特征

胶莱盆地蓬家夼金矿床及宋家沟金矿床均赋存于下白垩统莱阳群一段含金建造中,该含金建造由砾岩、含砾砂岩、碳质泥岩及碳酸盐岩等组成,Au100.2～241.0ng/g,Ag1.50～3.73μg/g,Zn560～1021μg/g,Pb356～364μg/g,Cu60～394μg/g,As11.0～25.4μg/g,同时富硫及有机碳。含金建造K-Rb、K-Ba呈正相关,K-Sr、K-Ca不相关,Sr/Ba<1,B、V关系均显示了陆相淡水沉积特征。La/Y-REE组成显示了沉积特征。围岩、矿石及矿石中黄铁矿及磁铁矿的稀土元素分布模式相似,该含金建造是矿源层也是容矿层,是区内重要的成矿地质条件及找矿标志。