孟加拉湾海表盐度变化特征的卫星遥感应用研究

本文利用2011年8月至2014年3月Aquarius卫星盐度产品结合Argo等实测盐度资料,探讨了孟加拉湾海表盐度的季节及年际变化特征。结果显示,Aquarius与Argo盐度呈显著线性正相关,总体较Argo盐度值低,偏差为-0.13,其中在孟加拉湾北部海域负偏差值比南部海域更大,分别为-0.28和-0.10。Aquarius卫星与Argo浮标在表层盐度观测深度上的差别是造成此系统偏差的主因。Aquarius盐度资料清晰显示了孟加拉湾海表盐度具有明显的季节变化特征,包括阿拉伯海高盐水的入侵引起湾南部海域盐度的变化以及湾北部淡水羽分布范围的季节性迁移等主要特征。此外,分析还揭示了2011(2012)年春季整个湾内出现异常高盐(低盐)现象。研究表明,2010(2011)年湾北部夏季降雨减少(增加)导致该海域海水盐度偏高(偏低),并通过表层环流向南输运引起次年春季湾内表层盐度出现异常高盐(低盐)现象,春季风应力旋度正(负)距平通过影响盐度垂直混合过程对同期表层盐度异常高盐(低盐)变化也有影响。     

南极低温降解菌Shewanella sp. NJ49羟化酶分离纯化及最适产酶条件研究

羟化酶是细菌降解烷烃的关键酶,本文以南极低温降解菌Shewanella sp.NJ49为研究对象,通过硫酸铵沉淀、超滤浓缩及葡聚糖凝胶Sephadex G-75柱层析方法,分离纯化NJ49的羟化酶,获得了单一羟化酶组分,研究了温度、p H、表面活性剂和盐度等环境因素对NJ49羟化酶酶活活性影响。结果表明,羟化酶组分由α、β、γ三个亚基组成,分子质量分别为56,45和36 k D。NJ49最适产酶条件为:温度15℃、p H7.2、盐度55;不同类型表面活性剂对酶的活性影响效应不一,两性离子表面活性剂、阳离子表面活性剂、非离子表面活性剂对酶活没有作用,阴离子表面活性剂+非离子表面活性剂混和剂和阳离子表面活性剂+非离子表面活性剂混和剂能提高羟化酶的活性。     

Comprehensive analyses of the initiation and landslide-generated wave processes of the 24 June 2015 Hongyanzi landslide at the Three Gorges Reservoir,China

Reservoir landslides pose a great threat to shipping safety, human lives and properties, and the operation of the hydropower station. In this paper, the 24 June 2015 Hongyanzi landslide at the Three Gorges Reservoir is considered as an example to study the initiation mechanism and landslide-generated wave process of a reservoir landslide. The finite difference method and limit equilibrium analysis are used to analyze the deformation and failure characteristics of the Hongyanzi slope. Simulation results show that a large deformation (about 358 mm) happens in the shallow deposits under intermittent rainfall condition, and the slope is in a limit state. At the same time, continuous rapid drawdown of the water level (about ?0.55 m/day during 8–24 June 2015) reduced the support and accelerated the drainage of the water for the bank slope. A coupling effect of intermittent rainfall and rapid drawdown of the water level was the triggering factor of the 24 June Hongyanzi landslide. Landslide-generated wave process was simulated using a fluid–solid coupling method by integrating the general moving object collision model. Simulation results show that the landslide-generated wave is dominated by the impulse wave, which is generated by sliding masses entering the river with high speed. The maximum wave height is about 5.90 m, and the wave would decay gradually as it spreads because of friction and energy dissipation. To prevent reservoir landslides, the speed for the rising or drawdown of the water level should be controlled, and most importantly, rapid drawdown should be avoided.     

五硼酸铷溶液的物化性质及物种分布

碳酸铷、硼酸化学计量比混合,蒸发溶液,直至五硼酸铷RbB5O8·4H2O晶体析出。经粉末X射线衍射（XRD）、拉曼光谱（Raman spectroscopy）、热重/微商热重/差示扫描量热（TG/DTG/DSC）、原子吸收光谱等实验方法,确定其化学组成及结构。298.15、333.15K时测量溶液的物理化学性质（密度、电导、pH）,并与经验方程进行拟合,研究五硼酸铷溶液的物化性质随浓度、温度的变化规律。根据文献报道的平衡常数,实验测量的pH数据,采用牛顿迭代法进一步研究五硼酸铷溶液中主要存在的硼酸根离子对类型、含量以及物种的形成。     

A new assessment model for evacuation vulnerability in urban areas

In the high-speed urbanization process of China, the urban population has been increasing significantly, leading to a high-density aggregation of population. However, the sharp increase in population density has not produced commensurate improvements in the road networks. On the contrary, the population increase induced a serious evacuation vulnerability, which cities experience during various hazards and catastrophic events. Therefore, research on evacuation vulnerability is important to urban planning. To assess the evacuation vulnerability, the optimal and worst scenarios should be considered because all possible evacuation plans occur between these extremes. However, most previous evacuation vulnerability studies are based on the worst-case scenario, only providing an upper bound of a potential evacuation assessment. To provide a more comprehensive theoretical basis for decision-makers to understand the consequences caused by all possible evacuations, this paper proposes an optimal evacuation vulnerability assessment model that provides the lower bound on potential evacuation difficulties. The model is solved by a stepwise spreading algorithm based on Graph Theory. Subsequently, to evaluate the effectiveness of the model, the study adopts the model to assess the evacuation capability of different road network topologies. A comparison with previous research was performed. The model was demonstrated in an application to the South Luogu Alley of Beijing, China. The significance of this paper is that the combination of our model with previous research may provide a more complete theoretical basis for an evacuation vulnerability assessment.     

The modeled atmospheric and oceanic response to the South China Sea SST anomaly

The sensitivity of the global atmospheric and oceanic response to sea surface temperature anomaly (SSTA) throughout the South China Sea (SCS) is investigated using the Fast Ocean-Atmosphere Model (FOAM). Forced by a warming SST, the experiment explicitly demonstrates that the responses of surface air temperature (SAT) and SST exhibit positive anomalous center over SCS and negative anomalous center over the Northern Pacific Ocean (NPO). The atmospheric response to the warm SST anomalies is characterized by a barotropical anomaly in middle-latitude, leading to a weak subtropical high in summer and a weak Aleutian low in winter. Accordingly, Indian monsoon and eastern Asian monsoon strengthen in summer but weaken in winter as a result of wind convergence owing to the warm SST. It is worth noting that the abnormal signals propagate poleward and eastward away in the form of Rossby Waves from the forcing region, which induces high pressure anomaly. Owing to action of the wind-driven circulation, an anomalous anti-cyclonic circulation is induced with a primary southward current in the upper ocean. An obvious cooling appears over the North Pacific, which can be explained by anomalous meridional cold advection and mixing as shown in the analysises of heat budget and other factors that affect SST.     

The Impact of Large-Scale Reclamation on Hydro-Dynamic Environment——A Case Study of Xinghua Bay

A hydro-dynamic model is established on basis of MIKE21 FM to simulate the hydro-dynamic characteristics of Xinghua Bay and investigate the influence of reclamation project on the tidal elevation and tidal currents. Tidal elevation data was obtained at the six tide gauge stations around the Xinghua Bay, and another six current stations were established to observe the tidal current velocity and direction. Validation shows that the model-simulated tidal elevation and tidal currents agree well with observations made at different stations. Predictions are made according to the reclamation project proposed in the regional marine planning of Hanjiang Industrial Park around the port in Putian City. The variations of hydro-dynamic factors, such as tide, current velocity and direction and tidal influx are obtained, and the adverse effect of reclamation on marine environment is discussed. It is shown that the tidal level inside the Xinghua Bay during high tide decreases after the reclamation project is completed. The tidal currents during flooding tide generally decrease in the southeast of the reclamation region, with the maximum decreasing amplitude reaching 0.44 m s^-1. On the other hand, the tidal currents during flooding tide increase around the southeast and southwest corners of the reclamation region. The tidal currents during ebb tide increase around the southeast and southwest corners of the reclamation region, with the maximum increasing amplitude attaining 0.18 m s^-1. The results in this paper can give some guidance for the marine environment management and the effective utilization of land in Putian.     

Production and Certification of Synthetic Selenium Isotopic Reference Materials

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.