岛屿环流理论发展回顾及展望

为了寻找岛屿环流理论进一步发展的突破口,使其在长期气候变化背景下海洋的响应以及深海环流等海洋领域前沿研究方向中继续起到指导作用,首先回顾了岛屿环流理论的发展过程,对其重要的发展里程碑和实际应用进行了系统梳理。同时,对岛屿环流理论未来进一步丰富发展的重点方向进行了展望。分析结果显示,该理论仍存在深入发掘的潜力,可在积分路径设计、时间变化项的影响和地形及斜压效应的影响等多方面进行细节修正和补充,拓展其应用的时间和空间尺度。     

�����������������Dz�������о��й������ϲ��ת��

?????????????????????????????????????????????????????Σ??о????й????????????????????????????????????????????仯??????????????????????????????????????????????????????????????仯??????????????廷???????????????????????????κ????????????????????????????????????????????????????????????????????????????     

Research and application of mineral resources assessment by weights of evidence model based on SIG

Geological data are usually of the characteristics of multi-source, large amount and multi-scale. The construction of Spatial Information Grid overcomes the shortages of personal computers when dealing with geological data. The authors introduce the definition, architecture and flow of mineral resources assessment by weights of evidence model based on Spatial Information Grid (SIG). Meanwhile, a case study on the prediction of copper mineral occurrence in the Middle-Lower Yangtze metallogenic belt is given. The results show that mineral resources assessement based on SIG is an effective new method which provides a way of sharing and integrating distributed geospatial information and improves the efficiency greatly.     

Numerical simulation of wave transformation and runup incorporating porous media wave absorber and turbulence models

A numerical wave tank is first established using the Navier–Stokes equations and the VOF method assuming laminar flow. The standard k–ε, realizable k–ε and RNG k–ε turbulent models are then incorporated to the numerical tank. An effective numerical method for wave absorption utilizing the energy-dissipating property of porous media is also included. To validate the accuracy of the proposed models, the propagation of a solitary wave, where analytical solution is available for comparison, is first simulated. This is followed by the simulation of irregular wave runup on a composite seawall, wave propagation over submerged bars and wave refraction and diffraction over an elliptic shoal, where experimental data are available for comparison. All computed results agree well with either the analytical solution or the experimental data.     

基于灾害风险管理的震害防御业务体系架构建立

随着我国经济社会的发展,震害防御业务内涵与外延不断演化发展.按照新时代防灾减灾救灾基本要求,首先阐述震害防御业务发展历程,遵循风险管理原则给出地震灾害风险基本概念;然后基于灾害风险管理过程,重构震害防御业务流程,运用系统分析方法对震害防御业务组成元素进行分析;最后在聚类分析的基础上,建立以地震灾害风险调查、评估、防治与...     

盐度胁迫对小黄鱼(Larimichthys polyactis)抗氧化酶、非特异性免疫酶和Na+/K+-ATP酶活力的影响

为了研究不同盐度对小黄鱼生理的影响,以人工养殖的4月龄小黄鱼(体质量为(12.6±3.1)g)为实验对象,将在自然海水(对照组盐度为22.1)中养殖的小黄鱼转入到盐度为5(低盐组)和34.5(高盐组)的海水中进行急性盐度胁迫处理10 d,测定并分析肝脏中超氧化物歧化酶(SOD)、过氧化氢酶(CAT)、碱性磷酸酶(AKP...     

Assessing titanium dioxide nanoparticles transport models by Bayesian uncertainty analysis

With the rapid growth of nanotechnology industry, nanomaterials as an emerging pollutant are gradually released into subsurface environments and become great concerns. Simulating the transport of nanomaterials in groundwater is an important approach to investigate and predict the impact of nanomaterials on subsurface environments. Currently, a number of transport models are used to simulate this process, and the outputs of these models could be inconsistent with each other due to conceptual model uncertainty. However, the performances of different models on simulating nanoparticles transport in groundwater are rarely assessed in Bayesian framework in previous researches, and these will be the primary objective of this study. A porous media column experiment is conducted to observe the transport of Titanium Dioxide Nanoparticles (nano-TiO₂). Ten typical transport models which consider different chemical reaction processes are used to simulate the transport of nano-TiO₂, and the observed nano-TiO₂ breakthrough curves data are used to calibrate these models. For each transport model, the parameter uncertainty is evaluated using Markov Chain Monte Carlo, and the DREAM_(ZS) algorithm is used to sample parameter probability space. Moreover, the Bayesian model averaging (BMA) method is used to incorporate the conceptual model uncertainty arising from different chemical reaction based transport models. The results indicate that both two-sites and nonequilibrium sorption models can well reproduce the retention of nano-TiO₂ transport in porous media. The linear equilibrium sorption isotherm, first-order degradation, and mobile-immobile models fail to describe the nano-TiO₂ retention and transport. The BMA method could instead provide more reliable estimations of the predictive uncertainty compared to that using a single model.     

Multi-type sensor placement and response reconstruction for building structures: Experimental investigations

Estimation of lateral displacement and acceleration responses is essential to assess safety and serviceability of high-rise buildings under dynamic loadings including earthquake excitations. However, the measurement information from the limited number of sensors installed in a building structure is often insufficient for the complete structural performance assessment. An integrated multi-type sensor placement and response reconstruction method has thus been proposed by the authors to tackle this problem. To validate the feasibility and effectiveness of the proposed method, an experimental investigation using a cantilever beam with multi-type sensors is performed and reported in this paper. The experimental setup is first introduced. The finite element modelling and model updating of the cantilever beam are then performed. The optimal sensor placement for the best response reconstruction is determined by the proposed method based on the updated FE model of the beam. After the sensors are installed on the physical cantilever beam, a number of experiments are carried out. The responses at key locations are reconstructed and compared with the measured ones. The reconstructed responses achieve a good match with the measured ones, manifesting the feasibility and effectiveness of the proposed method. Besides, the proposed method is also examined for the cases of different excitations and unknown excitation, and the results prove the proposed method to be robust and effective. The superiority of the optimized sensor placement scheme is finally demonstrated through comparison with two other different sensor placement schemes: the accelerometer-only scheme and non-optimal sensor placement scheme. The proposed method can be applied to high-rise buildings for seismic performance assessment.     

Silurian integrative stratigraphy and timescale of China

Silurian is a period with the shortest duration in Phanerozoic except for the Neogene and Quaternary. It represents an important and unique interval when the biotic diversity recovered quickly after the end-Ordovician mass extinction, different paleoplates or terranes conjoined, big oceans disappeared or narrowed, climate and sea level changed frequently, global biotic provincialism became weaker, some primitive plants started to occupy the land. Silurian is also the first system of which all the chronostratigraphic stratotypes(i.e. the GSSPs) including four series and seven stages were established by the International Subcommission on Silurian Stratigraphy(ISSS). Nonetheless, during the post-GSSP studies conducted by ISSS in the middle1980 s, some Silurian GSSPs were found to have some congenital defects such as no index fossils available that hinder the high resolution subdivision and correlation on a regional or global scale. In this paper, based on the latest development of Silurian study in China, the progress in biostratigraphy, chronostratigraphy, event stratigraphy(such as facies differentiation, heterochrony of black shales, marine red beds, carbonate rocks and reefs), chemostratigraphy, and tectonic stratigraphy(e.g., widespread of the late Silurian rocks in South China and its tectonic implication) are systematically summarized. Some existing problems and the areas to be focused in future work are also discussed. It is suitable for chronostratigraphic study to concentrate not only on the boundary but also doing multidisciplinary analysis on the biotic, chemical, magnetic, environmental, and chronologic aspects, in order to enhance the reliability and the potential for regional and global correlation of a certain GSSP.Some important achievements are expected in these areas in the Silurian study in China:(1) ecostratigraphy and basin analysis of the Llandovery, and the correlation of integrative stratigraphy with a high resolution;(2) establishment of the Wenlock to Pridoli chronostratigraphic framework;(3) the chemo-and magnetic stratigraphy and the age of some key intervals and horizons;(4)further investigation on paleogeography and plate tectonics; and(5) origin and early evolution of the terrestrial ecosystem. Some new breakthroughs might occur in the restudy on some of those problematic GSSPs of some particular series and stages.     

Air Compressibility Effect on Bouwer and Rice Seepage Meter

Measuring a disconnected streambed seepage flux using a seepage meter can give important streambed information and help understanding groundwater‐surface water interaction. In this study, we provide a correction for calculating the seepage flux rate with the consideration of air compressibility inside the manometer of the Bouwer and Rice seepage meter. We notice that the effect of air compressibility in the manometer is considerably larger when more air is included in the manometer. We find that the relative error from neglecting air compressibility can be constrained within 5% if the manometer of the Bouwer and Rice seepage meter is shorter than 0.8 m and the experiment is done in a suction mode in which air is pumped out from the manometer before the start of measurement. For manometers longer than 0.8 m, the relative error will be larger than 5%. It may be over 10% if the manometer height is longer than 1.5 m and the experiment is done in a no‐suction mode, in which air is not pumped out from the manometer before the start of measurement.