Classification of precipitation types using fall velocity-diameter relationships from 2D-video distrometer measurements

Fall velocity-diameter relationships for four different snowflake types (dendrite, plate, needle, and graupel) were investigated in northeastern South Korea, and a new algorithm for classifying hydrometeors is proposed for distrometric measurements based on the new relationships. Falling ice crystals (approximately 40 000 particles) were measured with a two-dimensional video disdrometer (2DVD) during a winter experiment from 15 January to 9 April 2010. The fall velocity-diameter relationships were derived for the four types of snowflakes based on manual classification by experts using snow photos and 2DVD measurements: the coefficients (exponents) for different snowflake types were 0.82 (0.24) for dendrite, 0.74 (0.35) for plate, 1.03 (0.71) for needle, and 1.30 (0.94) for graupel, respectively. These new relationships established in the present study (PS) were compared with those from two previous studies. Hydrometeor types were classified with the derived fall velocity-diameter relationships, and the classification algorithm was evaluated using 3× 3 contingency tables for one rain-snow transition event and three snowfall events. The algorithm showed good performance for the transition event: the critical success indices (CSIs) were 0.89, 0.61 and 0.71 for snow, wet-snow and rain, respectively. For snow events, the algorithm performance for dendrite and plate (CSIs = 1.0 and 1.0, respectively) was better than for needle and graupel (CSIs = 0.67 and 0.50, respectively).     

A bulk cloud parameterization in a Venus General Circulation Model

A condensing cloud parameterization is included in a super-rotating Venus General Circulation Model. A parameterization including condensation, evaporation and sedimentation of mono-modal sulfuric acid cloud particles is described. Saturation vapor pressure of sulfuric acid vapor is used to determine cloud formation through instantaneous condensation and destruction through evaporation, while pressure dependent viscosity of a carbon dioxide atmosphere is used to determine sedimentation rates assuming particles fall at their terminal Stokes velocity. Modifications are described to account for the large range of the Reynolds number seen in the Venus atmosphere.Two GCM experiments initialized with 10 ppm-equivalent of sulfuric acid are integrated for 30 Earth years and the results are discussed with reference to “Y” shaped cloud structures observed on Venus. The GCM is able to produce an analog of the “Y” shaped cloud structure through dynamical processes alone, with contributions from the mean westward wind, the equatorial Kelvin wave, and the mid-latitude/polar Mixed Rossby/Gravity waves. The cloud top height in the GCM decreases from equator to pole and latitudinal gradients of cloud top height are comparable to those observed by Pioneer Venus and Venus Express, and those produced in more complex microphysical models of the sulfur cycle on Venus. Differences between the modeled cloud structures and observations are described and dynamical explanations are suggested for the most prominent differences.     

The roughness of the dark side of Iapetus from the 2004 to 2005 flyby

The roughness of a planetary surface offers clues to its past geologic history. We apply a surface roughness model developed by Buratti and Veverka (Buratti, B.J., Veverka, J. [1985]. Icarus 64, 320-328) to Cassini ISS data from the January 1st, 2005 flyby of Iapetus. This model uses the observed scattering behavior to provide a depth to radius factor q quantifying the size of idealized craters on the surface. Our findings indicate that the surface on the dark side is significantly smoother than the surfaces of other icy low-albedo saturnian satellites. We have found that the average depth to radius on the leading (dark) side is 0.084, corresponding to a Hapke mean slope angle of 6°. As compared to the 13-33° Hapke mean slope angle of other icy satellites (Buratti, B.J., and 10 colleagues [2008]. Icarus 193, 309-322), our results present a clearly different picture for the leading surface of Iapetus, suggesting that the dark deposit contributes to the decrease in macroscopic surface roughness of the leading side. Attempts were made to obtain an average depth to radius value for the trailing (bright) side; however the scans of the bright side from this flyby exhibited large variations in albedo, resulting in results that were physically unrealistic.     

Oxidation of CO on surface hematite in high CO2 atmospheres

We propose a mechanism for the oxidation of gaseous CO into CO₂ occurring on the surface mineral hematite (Fe₂O₃(s)) in hot, CO₂-rich planetary atmospheres, such as Venus. This mechanism is likely to constitute an important source of tropospheric CO₂ on Venus and could at least partly address the CO₂ stability problem in Venus’ stratosphere, since our results suggest that atmospheric CO₂ is produced from CO oxidation via surface hematite at a rate of 0.4 petagrammes (Pg) CO₂ per (Earth) year on Venus which is about 45% of the mass loss of CO₂ via photolysis in the Venusian stratosphere. We also investigated CO oxidation via the hematite mechanism for a range of planetary scenarios and found that modern Earth and Mars are probably too cold for the mechanism to be important because the rate-limiting step, involving CO(g) reacting onto the hematite surface, proceeds much slower at lower temperatures. The mechanism may feature on extrasolar planets such as Gliese 581c or CoRoT-7b assuming they can maintain solid surface hematite which, e.g. starts to melt above about 1200 K. The mechanism may also be important for hot Hadean-type environments and for the emerging class of hot Super-Earths with planetary surface temperatures between about 600 and 900 K.     

Precipitation of heavy metals in produced water: influence on contaminant transport and toxicity

Produced water undergoes changes in its physical chemistry including precipitation of heavy metals after being discharged and mixed with ambient seawater. Potential impacts of the precipitation of heavy metals on their transport and toxicity were studied using samples from offshore oil production sites on the Scotian Shelf off eastern Canada. Concentrations of aluminum, cadmium, chromium, cobalt, copper, iron, lead, manganese, nickel and zinc were measured in total, particulate and dissolved fractions together with Microtox tests for assessment of toxicity. Heavy metals in produced water were transformed from dissolved to particulate phase in a period of hours under oxygenated conditions, and aggregated to larger particles that settle rapidly (>100 m/day) over a few days. In addition, there was production of buoyant particles comprised of heavy metal precipitates sequestered onto oil droplets that were transported to the surface. The particulate fraction was generally more toxic than the dissolved fraction. This was evident at the mixing interface between produced water and seawater where elevated particulate and toxicity levels were observed. Laboratory studies suggest an increase in the toxicity of discharged produced water over time. Time-series experiments showed a sustained toxic response for more than a week following the oxidation of freshly discharged produced water that initially elicited little or no toxic response in the Microtox test. Chemical processes identified in this study, namely precipitation of heavy metals and consequent settling and rising fluxes of particles, will influence the toxicity, the fate and the transport of potential contaminants in the produced water. Therefore, these processes need to be considered in assessment of the environmental impact associated with offshore oil and gas operations.     

210Pb and 7Be as Tracers for Aerosol Transfers at Center Guizhou，China：Ⅰ．The Explanation by Weekly Interval

It′s essential to measure air concentrations and depositional fluxes of environmental radionuclides in different regions for modeling global contamination transfer and validation, tracing deposition process and dating, referencing watershed erosion trace and assessing natural radiation of ecosystem. This study introduces the research background and methods and explains weekly variations of ²¹⁰Pb and ⁷Be concentrations in surface air and precipitation at Mt. Guanfeng/Guiyang since 2001. The results indicate that ²¹⁰Pb and ⁷Be concentrations in surface air fluctuate periodically at 2~6 week interval because of the meteorological condition changes. The annual trend in ²¹⁰Pb air concentration is overall influenced by air temperature variation and periodical rainfall. ⁷Be air concentration varies up and down regualarly. The synchronization of low concentrations for both ²¹⁰Pb and ⁷Be in surface air and high ratio (²¹⁰Pb/⁷Be ≥ 0.8) indicate oceanic poor ²¹⁰Pb-⁷Be air mass invasion. The synchronization of high concentrations of ²¹⁰Pb and ⁷Be in surface air and low ratio (²¹⁰Pb/⁷Be ≤ 0.7) implies rich ⁷Be air mass invasion from altostratus atmosphere. Weekly concentrations of ²¹⁰Pb and ⁷Be in precipitation and the K_d coefficients are high in late Autumn to Spring, and low in late Spring to Autumn. Although ²¹⁰Pb and ⁷Be concentrations vary seasonally, their weekly concentrations in precipitation increase with that of air concentration. The ²¹⁰Pb and ⁷Be weekly concentrations for seasonal division is about 0.2 Bq/L and 1 Bq/L, respectively. However, the K_d coefficient decreases when ²¹⁰Pb and ⁷Be air concentrations increase. Deposition of ²¹⁰Pb and ⁷Be with precipitation mainly take place in Spring and Summer; The weekly fallout of ²¹⁰Pb and ⁷Be increases with increasing precipitation; the increase of ⁷Be is triple of that of ²¹⁰Pb and 2.5 when precipitation nears to zero. The weekly-high fallout of ²¹⁰Pb and ⁷Be with precipitation corresponds with the dramatic decrease of their air concentrations within or vicinal weeks. The ratio of ²¹⁰Pb to ⁷Be in rainfall is overall ≤ 0.5 and varies synchronously with the ratio in surface air, indicating that the two radionuclides are cleaned by precipitation from air at close speed. In the extreme freezing disaster in 2008, both ²¹⁰Pb and ⁷Be air concentrations were low and coupling with coexist of low concentration of aerosol and high nuclides activities. Weekly concentration of ⁷Be in surface air at Mt. Guanfeng demonstrates the anticipated concentration level in the low-latitude and high-elevation region; the short-term fluctuations of ⁷Be concentration indicated the hysteresis was influcenced by the strong air current submersion and the low-elevation air mass rising differently at Mt. Guanfeng and Mt. Waliguan.      

使用NexION 300 ICP-MS按照加利福尼亚州65号法案测定钙制酸剂和膳食补充剂中的铅

按照美国加利福尼亚州65号法案中对钙制酸剂和膳食补充剂中Pb的控制要求,分析方法对这类固体物质中铅的检出限要求低于0.05g/g。电感耦合等离子体质谱仪(ICP-MS)的分析能力使其成为常规检测中低含量Pb测定的最佳仪器。但是,如果不采用特定的预防措施消除潜     

GIS-based distributed technique for assessing economic loss from flood damage: pre-feasibility study for the Anyang Stream Basin in Korea

Large national budgets are required for flood damage reduction projects, making it critical to ensure that public money used therein be spent efficiently. Accordingly, reliable assessment of flood damage is a critical issue in analysis of the economic aspects of flood damage reduction projects. To this end, this study aims to provide a GIS (geographical information system)-based technique for distributed flood damage assessment. We consider two aspects of flood damage assessment from an engineering and economic perspective, i.e. flood inundation analysis and multi-dimensional flood damage analysis (MD-FDA). To perform this assessment, we used a GIS-based framework and data processing method to assess damages. The proposed methodology was applied to flood control channel projects for flood disaster prevention in the Anyang Stream Basin in Korea and presents detailed GIS data processing and assessment results. Findings from this study may contribute to the improvement of usability of MD-FDA and may provide research directions for integrating economic and engineering factors. This distributed technique will also assist in the decision-making process when evaluating the economic feasibility of flood damage reduction projects for structural and non-structural measures.