The impact of deformation on vortex development in a baroclinic moist atmosphere

A mathematical relation between deformation and vertical vorticity tendency is built by introducing the frontogenesis function and the complete vertical vorticity equation, which is derived by virtue of moist potential vorticity. From the mathematical relation, it is shown that properly configured atmospheric conditions can make deformation exert a positive contribution to vortex development at rates comparable to other favorable factors. The effect of deformation on vortex development is not only related to the deformation itself, but also depends on the current thermodynamic and dynamic structures of the atmosphere, such as the convective stability, moist baroclinicity and vertical wind shear(or horizontal vorticity). A diagnostic study of a heavy-rainfall case that occurred during 20–22 July 2012 shows that deformation has the most remarkable effect on the increase in vertical vorticity during the rapid development stage of the low vortex during its whole life cycle. This feature is mainly due to the existence of an approximate neutral layer(about 700 h Pa) in the atmosphere where the convective stability tends to be zero. The neutral layer makes the effect of deformation on the vertical vorticity increase significantly during the vortex development stage, and thus drives the vertical vorticity to increase.     

东中国海黑潮海洋锋的季节变化特征及其成因

利用高分辨率海洋和大气再分析资料研究了东中国海黑潮海洋锋的季节变化特征及其成因。研究表明,东海黑潮海洋锋存在明显的季节变化,从冬季到次年春季逐渐增强,并在春季达到最强,初夏以后强度逐渐减弱,9—10月达到全年最弱。通过诊断混合层热流量方程发现,东海黑潮区一年四季均表现为暖的温度平流,有利于海洋锋的形成和维持,该暖平流也存在季节变化并在春季达到最大,对海洋锋在春季达到最强起了重要作用。海气界面净热通量在秋冬季对海洋锋的形成有促进作用,有利于海洋锋增强,而在春夏季则起抑制作用,促进海洋锋消亡。温度垂直输送全年对海洋锋起一定程度的抑制作用。总之,在海温水平平流和海表净热通量的共同作用下导致海洋锋春季达到最强,而夏秋季海表净热通量和温度垂直输送作用的共同作用致使海洋锋减弱并最后消失。因此,海洋的动力和热力共同作用导致了东海黑潮海洋锋的季节变化,其中海温水平平流和海表净热通量对海洋锋的季节变化起主要作用,而温度垂直输送项对海洋锋的发展起抑制作用,但影响相对较小。     

天津蓟县东水厂锰方硼石矿床成因新认识

天津蓟县东水厂锰方硼石矿床是世界上唯一一个具有经济开发价值的锰方硼石矿床,锰方硼石赋存与中元古代高于庄组二段泥晶白云岩中。本文通过微量元素分析探讨了锰方硼石的成矿环境,测定结果显示Sr/Ba=0.125~0.128;V/(Ni+V)=0.230~0.320;Th/U=4.356~4.898;V/Cr=0.018~0.026,各微量元素对比值范围变化不大;LREE总量为66.12×10~(-6)~67.90×10~(-6),HREE总量(包含Y)为18.88×10~(-6)~19.56×10~(-6),LREE/HREE值为3.38~3.60,Y/Ho值介于28.25~29.14之间,δCe介于0.829~0.854之间,显示为弱的负Ce异常,δEu值介于0.831~0.846之间,显示为弱的负Eu异常。地球化学数据指示其成矿环境属海相沉积环境,海水环境为相对氧化的状态,成矿过程中有陆源物质的加入。Sm/Nd-Eu/Sm图解表明研究区与柴达木盆地第三系蒸发岩较为相似,反应锰方硼石成矿时具有类似的蒸发成因。通过对硼同位素(δ~(11)B的数值范围为1.4‰~10.7‰)的解译进一步探讨了锰方硼石在原生成矿阶段的具体成因(海相蒸发沉积)。结合前人所做的锰方硼石地球化学数据,对东水厂锰方硼石矿床的成因做出了新的解释,即锰方硼石成矿时应属海相蒸发成因,而热液活动的过程则可能是发生于锰方硼石成矿之后,属后期热液改造作用,从而形成了锰方硼石复杂的地球化学特征。     

基于SDOG-ESSG的地球系统元胞自动机框架及其应用试验

元胞自动机结构简单且具备模拟复杂系统的能力,已被广泛应用于大气、流体力学、地球物理等领域。然而,现有元胞自动机以欧氏空间为约束进行地球系统过程模拟,忽略了地球重力等天然约束,导致计算过程中元胞状态的传递方向与真实运动的趋势方向不相符,一定程度上扭曲了最终的模拟结果。本文提出了地球系统元胞自动机这一概念,并从元胞表达及构建、邻居模型等方面设计了基于SDOG-ESSG格网的地球系统元胞自动机框架。由于演化规则取决于不同的应用,因此本文进一步以地壳的热传递为例,通过对热力学方程离散化设计了相应的演化规则。最后,借助公开的数据源开展了地壳热传递元胞自动机模拟的初步试验,并与一定区域下的数值模拟结果展开了比对。试验表明,与数值模拟方法相比,本文方法的模拟结果相对误差控制在27%以内,具备一定程度的可行性,可作为地球系统过程模拟的一种新思路。     

不同遥感影像的城市热岛空间分布特征分析

针对传统的地面观测方式很难全面掌握城市地面热岛的空间分布情况的问题,该文将HJ-1B卫星热红外图像代表的亮温图和采用HJ-1B卫星反演的温度图像正规化,利用量化等级体系对同一地区的亮温分布图和温度分布图进行划分,提出并采用间隙度指数对不同影像的高温区进行空间分布进行评价。实验结果表明:基于热红外影像的城市热岛空间分布比基于热红外影像反演的温度图的热岛空间分布更为集中,为研究不同影像之间的城市热岛空间分布提供了一种评价方法。     

A hybrid approach to modeling territorial control in violent armed conflicts

Territorial control is central to the understanding of violent armed conflicts, yet reliable and valid measures of this concept do not exist. We argue that geospatial analysis provides an important perspective to measure the concept. In particular, measuring territorial control can be seen as an application of calculating service areas around points of control. The modeling challenge is acute for areas with limited road infrastructure, where no complete network is available to perform the analysis, and movements largely occur off road. We present a new geospatial approach that applies network analysis on a hybrid transportation network with both actual road data and hexagon‐fishnet‐based artificial road data representing on‐road and off‐road movements, respectively. Movement speed or restriction can be readily adjusted using various input data. Simulating off‐road movement with hexagon‐fishnet‐based artificial road data has a number of advantages including scalability to small or large study areas and flexibility to allow all‐directional travel. We apply this method to measuring territorial control of armed groups in Sub‐Saharan Africa where inferior transport infrastructure is the norm. Based on the Uppsala Conflict Data Program's (UCDP) Georeferenced Event Data (GED) as well as spatial data on terrain, population locations, and limited transportation networks, we enhance the delineation of the specific areas directly controlled by each warring party during civil wars within a given travel time.     

Active Characteristics and Paleoearthquakes in the West Kalpin Nappe Since the Holocene,SW Tianshan Mountain

the Kalpin nappe is an important multiple thrust system. It is important to study the Cenozoic tectonic of the Tianshan Mountain. Holocene active characteristics and paleoearthquake of the Kalpin nappe can be used to evaluate the neotectonic of this area. In this paper, we accurately measured the fault scarp in the front of three thrust-fold faults and analyzed paleoearthquake events in the trenches of the Kalpin nappe. Using the ¹⁰Be exposure age, we obtained those geomorphic surface ages and paleoearthquake times. The result showed that the slip rates of the west Kalpintag fault, aozitag fault and the tuoketag fault were 1.45(+1.68/-0.44) mm/a, 0.81(+0.35/-0.19) mm/a and (0.3±0.05) mm/a, respectively since the Holocene. The slip rate indicated that the increased activity transferred from back-row fault to front-row fault and accorded with the piggy-back propagation model in the Tianshan Mountain. Displacements and recurrence intervals of paleoearthquakes was similar to the slip rate characteristics. It also showed paleoearthquakes in the front row fault were stronger than paleoearthquakes of the back row fault. The strong paleoearthquake which caused the highest surface rupture happened in the Kalpintag fault. The interval of paleoearthquakes was about 4 ka and the displacement of every paleoearthquake was about 3 m in the west Kalpintag fault; the interval of paleoearthquakes was about 2 ka and the displacement of every paleoearthquake was about 1m in the aozitag fault; the tuoketag fault ruptured only one paleoearthquake since 7 ka. The Piqiang tear fault was the tectonic result of different shortening rate between the west Kalpin system and the east Kalpin system. The shortening rate of west Kalpin system was obviously stronger than the east Kalpin system. The huge separation distance was near 20 km between the east and the west back-row fault. Because the slip rate of system transferred to the front-row fault in the piggy-back propagation model, the separation distance (~4 km) between the east and the west front-row fault was increasing.     

Integration of GIS and video surveillance

This paper discusses the integration of three-dimensional (3D) geographic information systems (GIS) and video surveillance systems using augmented reality (AR) techniques. The motivation for this integration is to overcome problems faced by conventional video surveillance systems. Explicit information concerning which camera currently monitors what area in such systems is missing; therefore, insight into the situation depends heavily on the operator’s training and experience. To ensure the complete coordination and monitoring of a situation in a system with multiple cameras, it is necessary to introduce a single reference system. GIS arises as a natural solution because it not only provides a solid ground truth but also provides semantic information that can be highly important in certain video surveillance applications. To integrate information into a GIS application, that information must be georeferenced. Based on our previous research regarding the addition of georeferencing information to surveillance video, this paper introduces models that can be applied to help integrate video and GIS. With an analogy to Milgram’s continuum between the real world and virtual reality, and analogous to the augmented reality and augmented virtuality in Milgram’s continuum, two models of integration are defined here: GIS-augmented video and video-augmented GIS. Then, we define the architecture of GIS-based video surveillance based on these proposed integration models, and finally, a prototype is implemented. The implemented prototype serves as a basis for analysing possible applications of real-world systems based on the integration of GIS and video.     

A parallel algorithm for coverage optimization on multi-core architectures

Location siting is an important part of service provision, with much potential to impact operational efficiency, safety, security, system reliability, etc. A class of location models seeks to optimize coverage of demand for service that is continuously distributed across space. Decision-making and planning contexts include police/fire resource allocation for a community, siting cellular towers to support cell phone signal transmission, locating emergency warning sirens to alert the public of severe weather and other related dangers, and many others as well. When facilities can be sited anywhere in continuous space to provide coverage to an entire region, this is a very computationally challenging problem to solve because potential demand for service is everywhere and there are an infinite number of potential facility sites to consider. This article develops a new parallel solution approach for this location coverage optimization problem through an iterative bounding scheme on multi-core architectures. The developed approach is applied to site emergency warning sirens in Dublin, Ohio, and fire stations in Elk Grove, California. Results demonstrate the effectiveness and efficiency of the proposed approach, enabling real-time analysis and planning. This work illustrates that the integration of cyberinfrastructure can significantly improve computational efficiency in solving challenging spatial optimization problems, fitting the themes of this special issue: cyberinfrastructure, GIS, and spatial optimization.