“老脚印”对自升式钻井平台插桩滑移的影响研究

渤海海域自升式钻井平台作业频率高,在同一区块多次插桩作业情况多,为自升式平台插桩作业带来严重的滑移风险。通过建立常用的两种类型桩靴的有限元分析模型,采用模拟计算和对比分析的研究方法,对在“老脚印”不同距离位置插桩时,桩基土体的塑性破坏特性、运移规律及桩靴所受侧向滑移力进行了模拟研究,得出了在不同土质条件下,桩基土和桩靴的受力特性及规律,分析了不同位置的“老脚印“对自升式平台插桩滑移风险的影响。     

危岩崩塌启动机制离心模型试验研究

大型高陡危岩崩塌初始失稳过程短暂,难以在现场进行及时观测并获取有效数据,为此引入离心模型试验。以重庆甑子岩陡崖高陡危岩崩塌为原型,对危岩崩塌启动机制展开研究,获取关键数据,定量化验证甑子岩危岩失稳的关键影响因素,探索危岩崩塌的离心模型试验方法。试验较好地完成了对岩质崩塌初始失稳过程的模拟,当危岩模型底部区域抗压强度为60 kPa时,失稳时刻离心加速度为73g;当抗压强度降至40 kPa时,失稳时刻离心加速度仅为18g;对照组试验证明高陡危岩底部区域强度对其整体稳定性起控制性作用。试验模型中上部岩体的失稳方式与原型具有一定差异,分析认为其原因除试验因素引入外力作用之外,主要是由于模型材料没有考虑原型的节理裂隙与抗拉强度所致,这表明高陡危岩崩塌模式除受底部岩体强度控制外,还与中上部岩体性状密切相关。研究结果可为高陡危岩压裂溃屈失稳机制提供试验依据与数据支撑,对崩塌灾害机理研究具有重要参考。     

利用GPR天线-目标极化的瞬时属性分析方法探测LNAPL污染土壤

轻非水相流体(LNAPL)泄漏后会对土壤和地下水造成严重污染,为了准确探测出LNAPL泄漏范围,本文将GPR天线-目标极化的瞬时属性分析方法应用于轻非水相流体污染土壤探测的研究中。采用注入柴油的石英砂砂箱在实验室建立污染土壤模型,利用探地雷达对该污染土壤分别进行天线方位为0°、90°的测量。LNAPL土壤污染物形状、大小、结构并不规则,因此可以通过0°和90°方位天线测量来分析天线-目标极化特征,了解目标物的走向、形状等地下介质信息。通过对预处理后的包含天线-目标极化特征的信息进行瞬时属性分析,LNAPL污染范围可以被清晰地识别,提高了GPR探测能力。     

Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.     

Occurrence and conceptual sedimentary model of Cambrian gypsum-bearing evaporites in the Sichuan Basin,SW China

During the Cambrian, gypsum-bearing evaporites formed in the Sichuan Basin, SW China. These rocks are important for oil and gas sealing, but details of their distribution and origin are not well established. This study examines the regional distribution and origin of the gypsum-bearing evaporites using a comprehensive analysis of drilling data from 34 wells, 5 measured cross-sections in the basin and surrounding area, and 96 maps of area-survey data. Results show that in the stratigraphic succession, the gypsum-bearing evaporites occur mainly in the Lower Cambrian Longwangmiao Formation, the Middle Cambrian Douposi Formation, and the Middle-Upper Cambrian Xixiangchi Group. Geographically, the rocks are found mainly in the southeastern part of the basin, and the distribution of deposits shows an overall SW-NE trend. The sedimentary environments for evaporite formation were evaporative lagoon and inter-platform basin in a platform setting. Gypsum was generated by the underwater concentration of sea water in a strongly evaporative environment. Both an evaporative restricted platform and a mixeddeposition restricted platform model appear to be applicable to the development of gypsum in the Sichuan Basin. The gypsum-bearing evaporites with the best sealing capacity are located mostly in the southeastern part of the basin. These constraints can be applied directly to regional exploration, and have implications for the regional paleogeography and paleoclimate.     

The Fragmentation in a Protoplanetary Disk and the Properties of the Resultant Self-Gravitating Clumps

We study the fragmentation properties in the protoplanetary disk and properties of the resultant self-gravitating clumps using our newly constructed disk model. Our disk model includes the mass inflall term from a molecular cloud core and the photoevaporation winds effect. We adopt the conventional fragmentation criterion to judge whether a protoplanetary disk can fragment. In this work, we follow our previous work to investigate the properties of the resultant self-gravitating clumps. In our calculation, the initial masses of the resultant self-gravitating clumps lie in the range of tens of M_J to more than one hundred of M_J, where M_J is the Jupiter mass. These initial masses can seemingly account for the masses of extrasolar planets in magnitude. We also calculate the subsequent gas accretion of clumps in 1.27 × 10⁴ yr after the formation of self-gravitating clumps. We find that the subsequent gas accretion of self-gravitating clumps is very efficient, and the clump masses grow to hundreds of M_J and the physical radii R_c of clumps increase to about 10 AU. Additionally, we also calculate the orbital migration of clumps. We find that most clumps have short migration timescale to be accreted onto the protostar, and only a small fraction of clumps have long migration timescale (>10⁶ yr) to successfully become gas giant planets. These results are consistent with previous studies.     

Ensemble clustering for efficient robust optimization of naturally fractured reservoirs

In the development of naturally fractured reservoirs (NFRs), the existence of natural fractures induces severe fingering and breakthrough. To manage the flooding process and improve the ultimate recovery, we propose a numerical workflow to generate optimal production schedules for smart wells, in which the inflow control valve (ICV) settings can be controlled individually. To properly consider the uncertainty introduced by randomly distributed natural fractures, the robust optimization would require a large ensemble size and it would be computationally demanding. In this work, a hierarchical clustering method is proposed to select representative models for the robust optimization in order to avoid redundant simulation runs and improve the efficiency of the robust optimization. By reducing the full ensemble of models into a small subset ensemble, the efficiency of the robust optimization algorithm is significantly improved. The robust optimization is performed using the StoSAG scheme to find the optimal well controls that maximize the net-present-value (NPV) of the NFR’s development. Due to the discrete property of a natural fracture field, traditional feature extraction methods such as model-parameter-based clustering may not be directly applicable. Therefore, two different kinds of clustering-based optimization methods, a state-based (e.g., s _w profiles) clustering and a response-based (e.g., production rates) clustering, are proposed and compared. The computational results show that the robust clustering optimization could increase the computational efficiency significantly without sacrificing much expected NPV of the robust optimization. Moreover, the performance of different clustering algorithms varies widely in correspondence to different selections of clustering features. By properly extracting model features, the clustered subset could adequately represent the uncertainty of the full ensemble.     

The Middle Triassic evolution of the Bangong–Nujiang Tethyan Ocean: evidence from analyses of OIB-type basalts and OIB-derived phonolites in northern Tibet

International Journal of Earth Sciences - In this paper, we present new major and trace element chemical data for the basalts and phonolites of the Nare ocean island fragment (NaOI), as well as...     

Tectonic significance of Triassic mafic rocks in the June Complex,Sanandaj–Sirjan zone,Iran

This study concentrates on the petrological and geochemical investigation of mafic rocks embedded within the voluminous Triassic June Complex of the central Sanandaj–Sirjan zone (Iran), which are crucial to reconstruct the geodynamics of the Neotethyan passive margin. The Triassic mafic rocks are alkaline to sub-alkaline basalts, containing 43.36–49.09 wt% SiO₂, 5.19–20.61 wt% MgO and 0.66–4.59 wt% total alkalis. Based on MgO concentrations, the mafic rocks fall into two groups: cumulates (Mg# = 51.61–58.94) and isotropic basaltic liquids (Mg# = 24.54–42.66). In all samples, the chondrite-normalized REE patterns show enrichment of light REEs with variable (La/Yb)_N ratios ranging from 2.48 to 9.00, which confirm their amalgamated OIB-like and E-MORB-like signatures. Enrichment in large-ion lithophile elements and depletion in high field strength elements (HFSE) relative to the primitive mantle further support this interpretation. No samples point to crustal contamination, all having undergone fractionation of olivine + clinopyroxene + plagioclase. Nevertheless, elemental data suggest that the substantial variations in (La/Sm)_PM and Zr/Nb ratios can be explained by variable degrees of partial melting rather than fractional crystallization from a common parental magma. The high (Nb/Yb)_PM ratio in the alkaline mafic rocks points to the mixing of magmas from enriched and depleted mantle sources. Abundant OIB alkaline basalts and rare E-MORB appear to be linked to the drifting stage on the northern passive margin of the Neotethys Ocean.     

Comparative study for environmental performances of traditional manufacturing and directed energy deposition processes

Additive manufacturing is considered more sustainable than traditional manufacturing due to its efficient energy and materials usage. However, previous literature indicates that this suggestion is applicable only for the polymer materials, and the environmental issues of additive manufacturing with metallic materials are still not clear. With the method of life cycle assessment, this paper analyzes and compares the energy consumptions and environmental impacts of direct energy deposition and traditional machining processes for a typical metal part. Further, the article attempts to identify the significant issues in the two manufacturing options that contribute most to the environmental impacts. Six environmental impacts were assessed in this study: global warming potential (GWP); acidification potential (AP); eutrophication potential; ozone depletion potential (ODP); photochemical ozone creation potential (POCP); and abiotic depletion potential (ADP). The results show that the gear laser fabrication process consumes more energy and releases more negative emissions compared with traditional gear manufacturing processes. The results of GWP, AP, ODP, ADP and POCP of the traditional gear manufacturing are only 30.33, 43.42, 17, 65.05 and 54.68% of the gear laser fabrication.