Biogenic volatile compound emissions from a temperate forest,China: model simulation

Emissions of biogenic volatile organic compounds (BVOC) were measured using a relaxed eddy accumulation (REA) technique on an above-canopy tower in a temperate forest (Changbai Mountain, Jilin province, China) during the 2010 and 2011 summer seasons. Solar global radiation and photosynthetically active radiation (PAR) were also measured. Based on PAR energy dynamic balance, an empirical BVOC emission and PAR transfer model was developed that includes the processes of BVOC emissions and PAR transfer above the canopy level, including PAR absorption and consumption, and scattering by gases, liquids, and particles (GLPs). Simulated emissions of isoprene and monoterpenes were in agreement with observations. The averages of the relative estimator biases for the flux were 39.3 % for isoprene, and 27.1 % for monoterpenes in the 2010 and 2011 growing seasons, with NMSE (normalized mean square error) values of 0.133 and 0.101, respectively. The observed and simulated mean diurnal variations of isoprene and monoterpenes in the 2010 and 2011 growing seasons were evaluated for the validation of the empirical model. Under observed atmospheric conditions, the sensitivity analysis showed that emissions of isoprene and monoterpenes were more sensitive to changes in PAR than to water vapor content or to the magnitude of the scattering factor. The emissions of isoprene and monoterpenes in the 2010 and 2011 growing seasons (from June to September) were estimated using this empirical model along with hourly observational data, with mean hourly emissions of 1.71 and 1.55 mg m^?2 h^?1 for isoprene, and 0.48 and 0.47 mg m^?2 h^?1 for monoterpenes in 2010 and 2011, respectively. As formaldehyde (HCHO) is considered as the main oxidation product of isoprene and monoterpenes, it is necessary to investigate the link between HCHO and BVOC emissions. GOME-2 HCHO vertical column densities (VCDs) can be used to estimate BVOC emission fluxes in the Changbai Mountain temperate forest.     

A modeling study of effective radiative forcing and climate response due to tropospheric ozone

This study simulates the effective radiative forcing(ERF) of tropospheric ozone from 1850 to 2013 and its effects on global climate using an aerosol–climate coupled model, BCC AGCM2.0.1 CUACE/Aero, in combination with OMI(Ozone Monitoring Instrument) satellite ozone data. According to the OMI observations, the global annual mean tropospheric column ozone(TCO) was 33.9 DU in 2013, and the largest TCO was distributed in the belts between 30°N and 45°N and at approximately 30°S; the annual mean TCO was higher in the Northern Hemisphere than that in the Southern Hemisphere;and in boreal summer and autumn, the global mean TCO was higher than in winter and spring. The simulated ERF due to the change in tropospheric ozone concentration from 1850 to 2013 was 0.46 W m~(-2), thereby causing an increase in the global annual mean surface temperature by 0.36℃, and precipitation by 0.02 mm d~(-1)(the increase of surface temperature had a significance level above 95%). The surface temperature was increased more obviously over the high latitudes in both hemispheres, with the maximum exceeding 1.4?C in Siberia. There were opposite changes in precipitation near the equator,with an increase of 0.5 mm d~(-1)near the Hawaiian Islands and a decrease of about-0.6 mm d~(-1)near the middle of the Indian Ocean.     

Energy budgets on the interactions between the mean and eddy flows during a persistent heavy rainfall event over the Yangtze River valley in summer 2010

In this study,a persistent heavy rainfall event(PHRE) that lasted for around 9 days(from 0000 UTC 17 to0000 UTC 26 June 2010) and caused accumulated precipitation above 600 mm over the Yangtze River valley,was reasonably reproduced by the advanced research WRF model.Based on the simulation,a set of energy budget equations that divided the real meteorological field into the mean and eddy flows were calculated so as to understand the interactions between the precipitation-related eddy flows and their background circulations(BCs).The results indicated that the precipitation-related eddy flows interacted with their BCs intensely during the PHRE.At different layers,the energy cycles showed distinct characteristics.In the upper troposphere,downscaled energy cascade processes appeared,which favored the maintenance of upper-level eddy flows;whereas,a baroclinic energy conversion,which reduced the upper-level jet,also occurred.In the middle troposphere,significant upscaled energy cascade processes,which reflect the eddy flows’ reactionary effects on their BCs,appeared.These effects cannot be ignored with respect to the BCs’ evolution,and the reactionary effects were stronger in the dynamical field than in the thermodynamical field.In the lower troposphere,a long-lived quasi-stationary lower-level shear line was the direct trigger for the PHRE.The corresponding eddy flows were sustained mainly through the baroclinic energy conversion associated with convection activities.Alongside this,the downscaled energy cascade processes of kinetic energy,which reflect the direct influences of BCs on the precipitation-related eddy flows,were also favorable.A downscaled energy cascade of exergy also appeared in the lower troposphere,which favored the precipitation-related eddy flow indirectly via the baroclinic energy conversion.     

Initiation of large-volume silicic centers in the Yellowstone hotspot track: insights from H<Subscript>2</Subscript>O- and F-rich quartz-hosted rhyolitic melt inclusions in the Arbon Valley Tuff of the Snake River Plain

During the onset of caldera cluster volcanism at a new location in the Snake River Plain (SRP), there is an increase in basalt fluxing into the crust and diverse silicic volcanic products are generated. The SRP contains abundant and compositionally diverse hot, dry, and often low-δ¹⁸O silicic volcanic rocks produced through time during the formation of individual caldera clusters, but more H₂O-rich eruptive products are rare. We report analyses of quartz-hosted melt inclusions from pumice clasts from the upper and lower Arbon Valley Tuff (AVT) to gain insight into the initiation of caldera cluster volcanism. The AVT, a voluminous, caldera-forming rhyolite, represents the commencement of volcanism (10.44 Ma) at the Picabo volcanic field of the Yellowstone hotspot track. This is a normal δ¹⁸O rhyolite consisting of early and late erupted members (lower and upper AVT, respectively) with extremely radiogenic Sr isotopes and unradiogenic Nd isotopes, requiring that ~50 % of the mass of these elements is derived from melts of Archean upper crust. Our data reveal distinctive features of the early erupted lower AVT melt including: variable F concentrations up to 1.4 wt%, homogenous and low Cl concentrations (~0.08 wt%), H₂O contents ranging from 2.3 to 6.4 wt%, CO₂ contents ranging from 79 to 410 ppm, and enrichment of incompatible elements compared to the late erupted AVT, subsequent Picabo rhyolites, SRP rhyolites, and melt inclusions from other metaluminous rhyolites (e.g., Bishop Tuff, Mesa Falls Tuff). We couple melt inclusion data with Ti measurements and cathodoluminescence (CL) imaging of the host quartz phenocrysts to elucidate the petrogenetic evolution of the AVT rhyolitic magma. We observe complex and multistage CL zoning patterns, the most critical being multiple truncations indicative of several dissolution–reprecipitation episodes with bright CL cores (higher Ti) and occasional bright CL rims (higher Ti). We interpret the high H₂O, F, F/Cl, and incompatible trace element concentrations in the context of a model involving melting of Archean crust and mixing of the crustal melt with basaltic differentiates, followed by multiple stages of fractional crystallization, remelting, and melt extraction. This multistage process, which we refer to as distillation, is further supported by the complex CL zoning patterns in quartz. We interpret new Δ¹⁸O(Qz-Mt) isotope measurements, demonstrating a 0.4 ‰ or ~180 °C temperature difference, and strong Sr isotopic and chemical differences between the upper and lower AVT to represent two separate eruptions. Similarities between the AVT and the first caldera-forming eruptions of other caldera clusters in the SRP (Yellowstone, Heise and Bruneau Jarbidge) suggest that the more evolved, lower-temperature, more H₂O-rich rhyolites of the SRP are important in the initiation of a caldera cluster during the onset of plume impingement.     

Precise orbit determination of BeiDou constellation: method comparison

Chinese BeiDou navigation satellite system is in official service as a regional constellation with five geostationary earth orbit (GEO) satellites, five inclined geosynchronous satellite orbit (IGSO) satellites and four medium earth orbit (MEO) satellites. There are mainly two methods for precise orbit determination of the BeiDou constellation found in the current literatures. One is the independent single-system method, where only BeiDou observations are used without help from other GNSS systems. The other is the two-step GPS-assisted method where in the first step, GPS data are used to resolve some common parameters, such as station coordinates, receiver clocks and zenith tropospheric delay parameters, which are then introduced as known quantities in BeiDou processing in the second step. We conduct a thorough performance comparison between the two methods. Observations from the BeiDou experimental tracking stations and the IGS Multi-GNSS Experiment network from January 1 to March 31, 2013, are processed with the Positioning and Navigation Data Analyst (PANDA) software. The results show that for BeiDou IGSO and MEO satellites, the two-step GPS-assisted method outperforms the independent single-system method in both internal orbit overlap precision and external satellite laser ranging validation. For BeiDou GEO satellites, the two methods show close performances. Zenith tropospheric delays estimated from the first method are very close to those estimated from GPS precise point positioning in the second method, with differences of several millimeters. Satellite clock estimates from the two methods show similar performances when assessing the stability of the BeiDou on board clocks.     

Recursive algorithm for fast GNSS orbit fitting

Gaussian elimination is an efficient and numerically stable algorithm for estimating parameters and their precision. However, before estimating the parameters, it is often prudent to perform statistical tests to achieve the best fitting model. We use Gaussian elimination to select the best fitting model among candidate models. A succinct relationship between the weighted sum of squared residuals and the previous one is revealed by a volume formula. For quick parameter estimation and determination of weighted sum of squared residuals, a recursive elimination algorithm is proposed in the context of Gaussian elimination. In order to improve the model selection efficiency, the parameter estimation and the determination of the weighted sum of squared residuals are carried out in parallel using the proposed recursive elimination algorithm in which the improvement at each recursive stage is judged by the Bayesian information criterion. Ultimately, the computational complexity and numerical stability of the recursive elimination proposed are briefly discussed, and a GNSS orbit interpolation example is used to verify the results. It shows that the proposed recursive elimination algorithm inherits the numerical stability of the Gaussian elimination, and this algorithm can be used to examine the gain from the newly introduced parameter, dynamically assess the fitting model, and fix the optimal model efficiently. The optimal fitting model with the lowest information is very close to the real situation verified by checkpoints.     

A new method for specular and diffuse pseudorange multipath error extraction using wavelet analysis

Multipath remains one of the major challenges in Global Navigation Satellite System (GNSS) positioning because it is considered the dominant source of ranging errors, which can be classified into specular and diffuse types. We present a new method using wavelets to extract the pseudorange multipath in the time domain and breaking it down into the two components. The main idea is an analysis-reconstruction approach based on application of both continuous wavelet transform (CWT) and discrete wavelet transform (DWT). The proposed procedure involves the use of L1 code-minus-carrier (CMC) observable where higher-frequency terms are isolated as residuals. CMC residuals are analyzed by applying the CWT, and we propose the scalogram as a technique for discerning time–frequency variations of the multipath signal. Unlike Fourier transform, the potential of the CWT scalogram for examining the non-stationary and multifrequency nature of the multipath is confirmed as it simultaneously allows fine detection and time localization of the most representative frequencies of the signal. This interpretation of the CWT scalogram is relevant when choosing the levels of reconstruction with DWT, allowing accurate time domain extraction of both the specular and diffuse multipath. The performance and robustness of the method and its boundary applicability are assessed. The experiment was carried out using a receiver of Campania GNSS Network. The results are given in which specular multipath error is achieved using DWT level 7 approximation component and diffuse multipath error is achieved using DWT level 6 denoised detail component.     

Optimization and Parametrical Investigation to Assess the Reconstitution of Different Types of Indian Sand Using Portable Travelling Pluviator

By using the air pluviation technique, it is aimed to achieve the desired relative density with uniform void ratio throughout the specimen in order to maintain the homogeneity and to avoid the spatial variability. Further, in order to achieve the maximum deposition intensity, a systematic optimization study has been carried out rigorously in a test tank to determine the diameter of the orifice to be employed for the sieve plates of different porosity and the number of sieve plates to be installed in the diffuser sieve sets. The study has been conducted with four different patterns of sieves with different porosity to achieve a wide range of relative densities for four different uniformly graded Indian sands. The dynamic penetrometer which is considered to be one of the cost effective instruments has been efficiently used to determine the soil resistance at various locations of the test tank for every given height of fall in order to check the uniformity of placement density throughout the sand bed. The study reveals that the sand beds of different relative densities could be achieved using different patterns of diffuser sieves at optimum sand flow rate without compromising the uniformity. The effect of height of fall as well as porosity of diffuser sieves on the relative density of different sands has been studied in detail. The deposition intensity and the relative density obtained from the present study are compared with the values available in the literature.     

Assessment and Prediction of Liquefaction Potential Using Different Artificial Neural Network Models: A Case Study

Soil liquefaction as a transformation of granular material from solid to liquid state is a type of ground failure commonly associated with moderate to large earthquakes and refers to the loss of strength in saturated, cohesionless soils due to the build-up of pore water pressures and reduction of the effective stress during dynamic loading. In this paper, assessment and prediction of liquefaction potential of soils subjected to earthquake using two different artificial neural network models based on mechanical and geotechnical related parameters (model A) and earthquake related parameters (model B) have been proposed. In model A the depth, unit weight, SPT-N value, shear wave velocity, soil type and fine contents and in model B the depth, stress reduction factor, cyclic stress ratio, cyclic resistance ratio, pore pressure, total and effective vertical stress were considered as network inputs. Among the numerous tested models, the 6-4-4-2-1 structure correspond to model A and 7-5-4-6-1 for model B due to minimum network root mean square errors were selected as optimized network architecture models in this study. The performance of the network models were controlled approved and evaluated using several statistical criteria, regression analysis as well as detailed comparison with known accepted procedures. The results represented that the model A satisfied almost all the employed criteria and showed better performance than model B. The sensitivity analysis in this study showed that depth, shear wave velocity and SPT-N value for model A and cyclic resistance ratio, cyclic stress ratio and effective vertical stress for model B are the three most effective parameters on liquefaction potential analysis. Moreover, the calculated absolute error for model A represented better performance than model B. The reasonable agreement of network output in comparison with the results from previously accepted methods indicate satisfactory network performance for prediction of liquefaction potential analysis.     

Carbon emission mitigation through regulatory policies and operations adaptation in supply chains: theoretic developments and extensions

Along with carbon emission regulations launched by governments and consumers’ rising concerns about climate changes and global carbon footprint, interests of academia and industry have risen in carbon-efficient supply chain management. This research focuses on some product supply chain to make a literature review-based investigation on proposing a theoretical framework. We also solve potential research issues of how diverse carbon emission regulations can work on supply chain performance as well as emission; in what way we can find coordination mechanisms and optimal policies for supply chain operations to abate emission and enhance system profitability within different scenarios; and also to evaluate the effect on emission reduction for each emission regulation aforementioned through comparing their associated supply chain performances and system emission. Both practitioners in industry and academia might find this study useful, as it generates concepts with a formal framework of potential and values theoretical issues in the emerging field of carbon-efficient supply chain management which combines carbon emission regulations with mature operation management to enrich the theory of supply chain management. This study is perhaps to be valuable and constructive both for operational decisions in firms and for the enactment as well as implementation of emission-reduction regulations. This study should activate further potential researches.