一种新的二进制地图矢量文件格式设计

比较了二制文件与文本文件的优点,以线状数据为例设计了便于文档序列化,易于面向对象ＧＩＳ进行了的二进矢量地图文件格式。     

Design of an adaptive GPS vector tracking loop with the detection and isolation of contaminated channels

GPS Solutions - In vector tracking loop (VTL), the relativity among received signals is exploited to deeply integrate the entire information within signal processing channels. However, the tracking...     

An enhanced approach for surface flow routing over drainage‐constrained triangulated irregular networks

The accuracy and efficiency of the simulations in distributed hydrological models must depend on the proper estimation of flow directions and paths. Numerous studies have been carried out to delineate the drainage patterns based on gridded digital elevation models (DEMs). The triangulated irregular network (TIN) has been increasingly applied in hydrological applications due to the advantages of high storage efficiency and multi‐scale adaptive performance. Much of the previous literature focuses mainly on filling the depressions on gridded DEMs rather than treating the special cases in TIN structures, which has hampered its applications to hydrological models. This study proposes a triangulation‐based solution for the removal of flat areas and pits to enhance the simulation of flow routing on triangulated facet networks. Based on the drainage‐constrained TIN generated from only a gridded DEM by the compound point extraction (CPE) method, the inconsistent situations including flat triangles, V‐shape flat edges and sink nodes are respectively identified and rectified. The optimization algorithm is an iterative process of TIN reconstruction, in which the flat areas are generalized into their center points and the pits are rectified by embedding break lines. To verify the proposed algorithm and investigate the potential for flow routing, flow paths of steepest descent are derived by the vector‐based tracking algorithm based on the optimized TIN. A case study of TIN optimization and flow path tracking was performed on a real‐world DEM. The outcomes indicate that the proposed approach can effectively solve the problem of inconsistencies without a significant loss in accuracy of the terrain model.     

Study on Sampling Rule and Simplification of LiDAR Point Cloud Based on Terrain Complexity

It is difficult to obtain digital elevation model (DEM) in the mountainous regions. As an emerging technology, Light Detection and Ranging (LiDAR) is an enabling technology. However, the amount of points obtained by LiDAR is huge. When processing LiDAR point cloud, huge data will lead to a rapid decline in data processing speed, so it is necessary to thin LiDAR point cloud. In this paper, a new terrain sampling rule had been built based on the integrated terrain complexity, and then based on the rule a LiDAR point cloud simplification method, which was referred as to TCthin, had been proposed. The TCthin method was evaluated by experiments in which XUthin and Lasthin were selected as the TCthin’s comparative methods. The TCthin’s simplification degree was estimated by the simplification rate value, and the TCthin’s simplification quality was evaluated by Root Mean Square Deviation. The experimental results show that the TCthin method can thin LiDAR point cloud effectively and improve the simplification quality, and at 5 m, 10 m, 30 m scale levels, the TCthin method has a good applicability in the areas with different terrain complexity. This study has theoretical and practical value in sampling theory, thinning LiDAR point cloud, building high-precision DEM and so on.     

Generating GPS satellite fractional cycle bias for ambiguity-fixed precise point positioning

With the development of precise point positioning (PPP), the School of Geodesy and Geomatics (SGG) at Wuhan University is now routinely producing GPS satellite fractional cycle bias (FCB) products with open access for worldwide PPP users to conduct ambiguity-fixed PPP solution. We provide a brief theoretical background of PPP and present the strategies and models to compute the FCB products. The practical realization of the two-step (wide-lane and narrow-lane) FCB estimation scheme is described in detail. With GPS measurements taken in various situations, i.e., static, dynamic, and on low earth orbit (LEO) satellites, the quality of FCB estimation and the effectiveness of PPP ambiguity resolution (AR) are evaluated. The comparison with CNES FCBs indicated that our FCBs had a good consistency with the CNES ones. For wide-lane FCB, almost all the differences of the two products were within ±0.05 cycles. For narrow-lane FCB, 87.8 % of the differences were located between ±0.05 cycles, and 97.4 % of them were located between ±0.075 cycles. The experimental results showed that, compared with conventional ambiguity-float PPP, the averaged position RMS of static PPP can be improved from (3.6, 1.4, 3.6) to (2.0, 1.0, 2.7) centimeters for ambiguity-fixed PPP. The average accuracy improvement in the east, north, and up components reached 44.4, 28.6, and 25.0 %, respectively. A kinematic, ambiguity-fixed PPP test with observation of 80 min achieved a position accuracy of better than 5 cm at the one-sigma level in all three coordinate components. Compared with the results of ambiguity-float, kinematic PPP, the positioning biases of ambiguity-fixed PPP were improved by about 78.2, 20.8, and 65.1 % in east, north, and up. The RMS of LEO PPP test was improved by about 23.0, 37.0, and 43.0 % for GRACE-A and GRACE-B in radial, tangential, and normal directions when AR was applied to the same data set. These results demonstrated that the SGG FCB products can be produced with high quality for users anywhere around the world to carry out ambiguity-fixed PPP solutions.     

Studies on object reconstruction from space using three-line scanner imagery

The paper investigates the capability of object reconstruction from space for two specific projects. Both of them are based on the use of three-line scanner systems allowing for simultaneous digital image recording from three different angles. An efficient model for combined point determination is proposed, considering the digital image data as well as orbit information, GPS and INS observations. The resulting accuracy is estimated from project oriented simulations. Finally, the possibilities for DTM generation, orthophoto production and stereo compilation from three-line scanner imagery are discussed.     

论(N-ζ)公式的内涵及推求N的精度

介绍了大地水准面(N)与似大地水准面(ζ)之差公式的推导方法,揭示了其物理内涵,论述了其在精化大地水准面中的重要作用。当似大地水准面精度达到cm级时,大地水准面也将达到同样的精度。     

前方交会及光电高程导线在桥梁圆形立柱监理中的应用

根据对前方交会及光电高程导线的精度分析,对用前方交会及光电高程导线复核圆形立柱进行了探讨,并给出了工程实例验证.     

多媒体地理信息系统的网络结构分析

数据模型是GIS的灵魂和关键,为了使开发出的GIS尽可能准确地反映地理空间,能够较好地满足GIS用户各方面的需要,而网络拓扑对网络的构成也至关重要,本文分析和总结了早期和近期GIS几种数据模型的优缺点,并在此基础上提出了整体GIS数据模型及网络设计的几种常见模式.     

用CC的方法分析和解决一个常见的网络安全问题

CC导出PP的过程是一种安全评估通用语言到某类产品的具体应用过程,需要经过需求分析、得出安全目的、提出安全功能要求与安全保证要求等几个阶段。本文利用这些过程的基本方法和思想全面分析一个常见的网络安全问题,并按照保护轮廓的模式给出该网络的安全要求。