Fixing problems in fisheries—integrating ITQs,CBM and MPAs in management

We aim to show how some of the important interdisciplinary fixes or solutions to diverse problems observed in fisheries can complement each other. This can be achieved through methodical allocation of the rights pertaining to fisheries and simultaneous implementation of policy instruments to correct for market failures and equity concerns. We emphasize via a roadmap that there are some general principles that should be invoked when choosing between alternative structures of rights. Our examples from Sweden provide evidence of the flexibility of fishing rights and how they can be adapted to integrate fixes from different disciplines into practical fisheries management.     

Time-lapse seismic analysis of pressure depletion in the Southern Gas Basin

In the Southern Gas Basin (SGB) of the North Sea there are many mature gas fields where time‐lapse monitoring could be very beneficial in extending production life. However, the conditions are not immediately attractive for time‐lapse seismic assessment. This is primarily because the main production effect to be assessed is a pore pressure reduction and frame stiffening because of gas production in tight sandstone reservoirs that also have no real seismic direct hydrocarbon indicators. Modelling, based on laboratory measurements, has shown that such an effect would be small and difficult to detect in seismic data. This paper makes two main contributions. Firstly, this is, to our knowledge, the first time‐lapse study in the SGB and involves a real‐data assessment of the viability for detecting production in such an environment. Secondly, the feasibility of using markedly different legacies of data in such a study is addressed, including an assessment of the factors influencing the crossmatching. From the latter, it is found that significant, spatially varying time shifts need to be, and are successfully, resolved through 3‐D warping. After the warping, the primary factors limiting the crossmatching appear to be residual local phase variations, possibly induced by the differing migration strategies, structure, reverberations and different coherencies of the volumes, caused by differences in acquisition‐structure azimuth and acquisition fold. Despite these differences, a time‐lapse amplitude signature is observed that is attributable to production. The character of the 4‐D amplitude anomalies may also indicate variations in stress sensitivity, e.g. because of zones of fracturing. Additionally, warping‐derived time attributes have been highlighted as a potential additional avenue for detection of pressure depletion in such reservoirs. Although the effects are subtle, they may indicate changes in stress/pressure in and around the reservoir because of production. However, to fully resolve the subtle time‐lapse effects in such a reservoir, the data differences need to be better addressed, which may be possible by full re‐processing and pre‐stack analysis, but more likely dedicated 4‐D acquisition would be required.     

The stable aryl hydrocarbon receptor agonist potency of United Kingdom Continental Shelf (UKCS) offshore produced water effluents

The in vitro aryl hydrocarbon receptor (AhR) agonist potency of offshore produced water effluents, collected from the United Kingdom Continental Shelf, was determined using the dioxin responsive (DR)-chemically activated luciferase expression (CALUX) assay. Octadecylsilane (C18) solid phase extraction (SPE) extracts of produced water were exposed to DR-CALUX cells for 24 h in order to investigate the contribution in potency from compounds that are stable to metabolism by the CALUX cells during exposure. The stable AhR agonist potency determined over 24 h was highly variable and ranged from 1 to 430 ng TCDD TEQ_CALUX l⁻¹. These data reflect the highly variable composition of produced water discharges from different production fields. It is recommended that further work be performed to characterise the full range of stable dioxin like AhR agonists present in offshore produced water discharges using techniques such as bioassay-directed analysis.     

A SIMPLE SOIL MOISTURE INDEX TO FORECAST CROP YIELDS

Neutron probe soil moisture measurements obtained biweekly during the growing season between 1982 and 1991 from multiple depths under grass-covered plots at 17 Illinois Climate Network sites are used to forecast crop yields. A Soil Moisture Index (SMIX) that combines the effect of intensity, duration, and timing of drought or excessively wet conditions was computed by integrating the quantity of available soil moisture throughout the rooting zone over the growing season. Relationships between the SMIX values and crop yields are evaluated at county, regional, and statewide scales. Coefficients of determination (r ²) for relationships between the SMIX values and maize, soybeans, and hay yields at the statewide level are 0.88, 0.74, and 0.81, respectively, when the period of integration is terminated at the end of the growing season. This new soil index can be employed to forecast yields as early as 12 weeks before harvest for the state of Illinois. However, predictions with RMSE ≤ 10% of the mean yield can be achieved only for SMIX integration periods ending 5, 9, and 6 weeks before harvest for maize, soybeans, and hay, respectively. Nomograms are presented for using the relationships between the SMIX values and crop yields to forecast Illinois's major crops well before harvest.     

Balancing trade‐off issues in land use change and the impact on streamflow and salinity management

The south‐west region of the Goulburn–Broken catchment in the south‐eastern Murray–Darling Basin in Australia faces a range of natural resource challenges. A balanced strategy is required to achieve the contrasting objectives of remediation of land salinization and reducing salt export, while maintaining water supply security to satisfy human consumption and support ecosystems. This study linked the Catchment Analysis Tool (CAT), comprising a suite of farming system models, to the catchment‐scale CATNode hydrological model to investigate the effects of land use change and climate variation on catchment streamflow and salt export. The modelling explored and contrasted the impacts of a series of different revegetation and climate scenarios. The results indicated that targeted revegetation to only satisfy biodiversity outcomes within a catchment is unlikely to have much greater impact on streamflow and salt load in comparison with simple random plantings. Additionally, the results also indicated that revegetation to achieve salt export reduction can effectively reduce salt export while having a disproportionately smaller affect on streamflows. Furthermore, streamflow declines can be minimized by targeting revegetation activities without significantly altering salt export. The study also found that climate change scenarios will have an equal if not more significant impact on these issues over the next 70 years. Uncertainty in CATNode streamflow predictions was investigated because of the effect of parameter uncertainty. Copyright © 2012 John Wiley & Sons, Ltd.     

Carbonate cements in Miller field of the UK North Sea: a natural analog for mineral trapping in CO<Subscript>2</Subscript> geological storage

Miller field of the North Sea has had high concentrations of natural CO₂ for ~70 Ma. It is an ideal analog for the long-term fate of CO₂ during engineered storage, particularly for formation of carbonate minerals that permanently lock up CO₂ in solid form. The Brae Formation reservoir sandstone contains an unusually high quantity of calcite concretions; however, C and O stable isotopic signatures suggest that these are not related to the present-day CO₂ charge. Margins of the concretions are corroded, probably because of reduced pH due to CO₂ influx. Dispersed calcite cements are also present, some of which postdate the CO₂ charge and, therefore, are the products of mineral trapping. It is calculated that only a minority of the reservoired CO₂ in Miller (6–24%) has been sequestrated in carbonates, even after 70 Ma of CO₂ emplacement. Most of the CO₂ accumulation is dissolved in pore fluids. Therefore, in a reservoir similar to the Brae Formation, engineered CO₂ storage must rely on physical retention mechanisms because mineral trapping is both incomplete and slow.     

In situ tensile fracture toughness of surficial cohesive marine sediments

This study reports the first in situ measurements of tensile fracture toughness, K _IC, of soft, surficial, cohesive marine sediments. A newly developed probe continuously measures the stress required to cause tensile failure in sediments to depths of up to 1 m. Probe measurements are in agreement with standard laboratory methods of K _IC measurements in both potter’s clay and natural sediments. The data comprise in situ depth profiles from three field sites in Nova Scotia, Canada. Measured K _IC at two muddy sites (median grain size of 23–50 μm) range from near zero at the sediment surface to >1,800 Pa m^1/2 at 0.2 m depth. These profiles also appear to identify the bioturbated/mixed depth. K _IC for a sandy site (>90% sand) is an order of magnitude lower than for the muddy sediments, and reflects the lack of cohesion/adhesion. A comparison of K _IC, median grain size, and porosity in muddy sediments indicates that consolidation increases fracture strength, whereas inclusion of sand causes weakening; thus, sand-bearing layers can be easily identified in K _IC profiles. K _IC and vane-measured shear strength correlate strongly, which suggests that the vane measurements should perhaps be interpreted as shear fracture toughness, rather than shear strength. Comparison of in situ probe-measured values with K _IC of soils and gelatin shows that sediments have a K _IC range intermediate between denser compacted soils and softer, elastic gelatin.     

DNAPL Characterization Methods and Approaches, Part 2: Cost Comparisons

Contamination from the use of chlorinated solvents, often classified as dense nonaqueous phase liquids (DNAPLs) when in an undissolved state, pose environmental threats to ground water resources worldwide. DNAPL site characterization method performance comparisons are presented in a companion paper (Kram et al. 2001). This study compares the costs for implementing various characterization approaches using synthetic unit model scenarios (UMSs), each with particular physical characteristics. Unit costs and assumptions related to labor, equipment, and consumables are applied to determine costs associated with each approach for various UMSs. In general, the direct-push sensor systems provide cost-effective characterization information in soils that are penetrable with relatively shallow (less than 10 to 15 m) water tables. For sites with impenetrable lithology using direct-push techniques, the Ribbon NAPL Sampler Flexible Liner Underground Technologies Everting (FLUTe) membrane appears to be the most cost-effective approach. For all scenarios studied, partitioning interwell tracer tests (PITTs) are the most expensive approach due to the extensive pre-and post-PITT requirements. However, the PITT is capable of providing useful additional information, such as approximate DNAPL saturation, which is not generally available from any of the other approaches included in this comparison.