A NUMERICAL MODEL FOR THE TIDES AND TIDAL CURRENTS IN THE TAIWAN STRAIT

Semidiurnal and diurnal tidal waves in the Taiwan Strait are computed simultaneously by using finite difference method with two-dimensional nonlinear hydrodynamic equations. The agreement between the computed and observed results is considered satisfactory.     

基于分块分形编码的多姿态、表情人脸图像检索

利用图像分形编码中定义域块和最小均方误差一一对应的特点，提出了1种基于分形编码的多姿态、表情的人脸图像检索方法。该方法将待检索图像分割为相同大小的值域块，然后将每一值域块按给定的定义域块进行分形编码，得到最小均方误差，计算该最小均方误差与图像库中最小均方误差的欧氏距离。将待检索图像所有值域块的欧氏距离求平均，此平均欧氏距离较小的几幅图像即为检索出的图像。实验证明该方法能够准确地检索出图像库中存储的同一人的不同姿态、表情的图像。     

混凝土的渗透性与耐久性

渗透性是混凝土耐久性中最重要的内容。论述了混凝土耐久性的影响因素、研究方法 ,以及混凝土渗透机理和渗透性与耐久性的关系。     

热带气旋活动对中国夏季雨带类型与ENSO的响应关系

本文分析研究了热带气旋１）活动与中国夏季２）３组（包括８种）主要多雨带类型的响应关系。同时对热带气旋活动与夏季大陆气温和ＥＮＳＯ事件的始终时间的响应关系，也进行了探讨。分析表明，夏季中国的雨带分布特征对热带气旋活动有着十分重要的指示意义。热带气旋活动与中国大陆气温有着正相关关系，与ＥＮＳＯ事件的发生有着反相关关系     

中太平洋海山群漂移史及其来源

中太平洋海山群的海山呈簇状排列且近EW向展布于太平洋海山密集区，其四周分布着一系列NW走向的线性列岛及规模巨大的水下海山链。它位于明显属于海山链构造的夏威夷群岛和马绍尔群岛之间，处于莱恩群岛的北西向延伸方向上，与热点作用的板内火山作用关系密切。结合前人对中太平洋海山群形成和漂移的认识，从板块运动和几何学角度出发，采用Backtracking和Hot-spotting海山追踪方法对该区海山进行了追踪，发现该区海山的热点源主要位于现今法属玻利尼西亚群岛区（法属玻利尼西亚热点群），这与前人从古地磁和钻探资料出发得到的结果相接近。研究表明，中太平洋海山群是多热点成因的板内火山作用和板块构造运动的共同产物，它在130～90Ma期间起源于法属玻利尼西亚热点群，曾随着太平洋板块发生过向南和向北的运动，既有水平方向的漂移又有垂直方向上的升降，在漂移和升降过程中还受到了当时大规模多期的热点活动和断裂活动的改造作用，经过一个漫长的过程后才到达今天的位置，最后形成了现今呈簇状分布的海山群。     

青岛市水环境污染及其防治对策

通过分析近几年青岛市地表，地下水水质监测资料，总结水环境污染地区分布规律，摸清水环境污染形成原因，对当前防污治污工作提出了对策建议。     

上海石化总厂化工物料码头对附近水下地形变化的影响

分析了上海石化总厂化工物料码头周围水下地形工程前后的变化。指出在淤泥质岸段,由于沿岸工程的影响,造成工程附近水域动力环境的改变,水下地形随之作出相应的调整。特别在淤泥质岸段附近流急、含沙量高的水域中构筑沿岸工程,工程的水流下方一侧,水流减缓,水流挟沙能力大大减弱,出现明显的局部淤浅地形,为提高工程效益,对各工程之间的相互影响,应予以重视。     

Frequency-selective attenuation of sound propagation and reverberation in shallow water

Ｆｒｅｑｕｅｎｃｙ－ｓｅｌｅｃｔｉｖｅ　ａｔｔｅｎｕａｔｉｏｎ　ｏｆ　ｓｏｕｎｄ　ｐｒｏｐａｇａｉｏｎ　ａｎｄ　ｒｅｖｅｒｂｅｒａｔｉｏｎ　ｉｎ　ｓｈａｌｌｏｗ　ｗａｔｅｒTXＦｒｅｑｕｅｎｃｙ－ｓｅｌｅｃｔｉｖｅａｔｔｅｎｕａｔｉｏｎｏｆｓｏｕｎｄｐ...     

Effects of an Artificial Breakwater on the Distributions of Planktonic Microbial Communities

The summer distributions of planktonic microbial communities (heterotrophic and phtosynthetic bacteria, phtosynthetic and heterotrophic nanoflagellates, ciliate plankton, and microphytoplankton) were compared between inner and outer areas of Lake Sihwa, divided by an artificial breakwater, located on the western coast of Korea, in September 2003. The semienclosed, inner area was characterized by hyposaline surface water (<17 psu), and by low concentrations of dissolved oxygen (avg. 0.4 mg L¹) and high concentrations of inorganic nutrients (nitrogenous nutrients >36 μM, phosphate <4 μM) in the bottom layer. Higher densities of heterotrophic bacteria and nanoflagellates also occurred in the inner area than did in the outer area, while microphytoplankton (mainly diatoms) occurred abundantly in the outer area. A tiny tintinnid ciliate, Tintinnopsis nana, bloomed into more than 10⁶ cells L¹ at the surface layer of the inner area, while its abundance was much lower (10³-10⁴ cells L¹) in the outer area of the breakwater. Ciliate abundance was highly correlated with heterotrophic bacteria (r = 0.886, p < 0.001) and heterotrophic flagellates (r = 0.962, p < 0.001), indicating that rich food availability may have led to theT. nana bloom. These results suggest that the breakwater causes the eutrophic environment in artificial lakes with limited flushing of enriched water and develops into abundant bacteria, nanoflagellates, and ciliates.     

Strength Analysis of Turret Mooring Productive/Storage Tanker

The longitudinal strength of turret mooring productive/storage tanker is studied.A numeri-cal example has been implemented according to the method presented in this paper to give practical il-lustration.From the results of the numerical example,it is concluded that the turret hole located near theforward of the amidships has small effect on the longitudinal strength of the ship hull.As for design ex-treme value of wave bending moment of storage tanker,statistic method is a more reasonablemethodology,especially with the consideration of the servere environmental conditions.The primary esti-mation of design section modulus of turret storage tanker can be determined by this design bending mo-ment.