Site effect on vulnerability of high-rise shear wall buildings under near and far field earthquakes

Worldwide experience repeatedly shows that damages in structures caused by earthquakes are highly dependent on site condition and epicentral distance. In this paper, a 21-storey shear wall-structure built in the 1960s in Hong Kong is selected as an example to investigate these two effects. Under various design earthquake intensities and for various site conditions, the fragility curves or damage probability matrix of such building is quantified in terms of the ductility factor, which is estimated from the ratio of storey yield shear to the inter-storey seismic shear. For high-rise buildings, a higher probability of damage is obtained for a softer site condition, and damage is more severe for far field earthquakes than for near field earthquakes. For earthquake intensity of VIII, the probability of complete collapse (P) increases from 1 to 24% for near field earthquakes and from 1 to 41% for far field earthquakes if the building is moved form a rock site to a site consisting a 80 m thick soft clay. For intensity IX, P increases from 6 to 69% for near field earthquake and from 14 to 79% for far field earthquake if the building is again moved form rock site to soft soil site. Therefore, site effect is very important and not to be neglected. Similar site and epicentral effects should also be expected for other types of high-rise structures.     

Modelling atmospheric and hydrologic processes for assessment of meadow restoration impact on flow and sediment in a sparsely gauged California watershed

The restoration of meadowland using the pond and plug technique of gully elimination was performed in a 9‐mile segment along Last Chance Creek, Feather River Basin, California, in order to rehabilitate floodplain functions such as mitigating floods, retaining groundwater, and reducing sediment yield associated with bank erosion and to significantly alter the hydrologic regime. However, because the atmospheric and hydrological conditions have evolved over the restoration period, it was difficult to obtain a comprehensible evaluation of the impact of restoration activities by means of field measurements. In this paper, a new use of physically based models for environmental assessment is described. The atmospheric conditions over the sparsely gauged Last Chance Creek watershed (which does not have any precipitation or weather stations) during the combined historical critical dry and wet period (1982–1993) were reconstructed over the whole watershed using the atmospheric fifth‐generation mesoscale model driven with the US National Center for Atmospheric Research and US National Center for Environmental Prediction reanalysis data. Using the downscaled atmospheric data as its input, the watershed environmental hydrology (WEHY) model was applied to this watershed. All physical parameters of the WEHY model were derived from the existing geographic information system and satellite‐driven data sets. By comparing the prerestoration and postrestoration simulation results under the identical atmospheric conditions, a more complete environmental assessment of the restoration project was made. Model results indicate that the flood peak may be reduced by 10–20% during the wet year and the baseflow may be enhanced by 10–20% during the following dry seasons (summer to fall) in the postrestoration condition. The model results also showed that the hydrologic impact of the land management associated with the restoration mitigates bank erosion and sediment discharge during winter storm events. Copyright © 2013 John Wiley & Sons, Ltd.     

Gravitational model of the Taiwan lithosphere (along the profile Taiwan Strait-Taiwan Island-West Philippine basin)

Based on two-dimensional gravity modeling, the density section of the lithosphere beneath Taiwan and the surrounding areas is constructed. According to the density parameters, the lithosphere of this region comprises both the continental and oceanic types. The continental lithosphere is lighter than the oceanic one and demonstrates insignificant density differentiation through the entire section. The oceanic lithosphere is more contrasting with respect of both the crust and mantle density. The complicated Taiwan density structure corresponding to Taiwan Island is defined to be superimposed on the transition zone between the continental and oceanic lithospheric blocks. This structure with contrasting density boundaries is characterized by the elevated and high density values of its constituting heterogeneities. The formation of the Taiwan density structure is related to geodynamic processes in the Taiwan area marking the collision zone between the Eurasian and Philippine Sea plates.     

A straightforward approach for using single time domain simulations to assess characteristic extreme responses

Short-term wave design approach of marine structures, using nonlinear time domain simulations, is a design procedure that is recognized by various modern standard codes. One of the most challenging points of this approach is the evaluation of the characteristic extreme values for response parameters used in the design check equations. The most straightforward and recommended way to evaluate a response characteristic value is by fitting an extreme value probability distribution to the N-sample of extreme values extracted from N independent time domain simulations with duration equal to the short-term period indicated by the code, which is usually taken as 3 h. However, this procedure would not be practical for some types of marine structures, such as risers and mooring lines, under numerous design load cases and demanding huge finite element models. A more feasible approach would be to assess the response extreme value distribution using only a single short-term time domain simulation with duration shorter than 3 h. But reduced time simulations always introduce some additional statistical uncertainty into the extreme values estimates. This paper discusses a workable way of properly taking into account the statistical uncertainty associated with the simulation length in the assessment of a characteristic short-term extreme response value based on a single time series.     

The birthplaces of active regions and X-ray bright points

A comparison of soft X-ray pictures of the Sun (S-054 experiment of Skylab) with K-line spectroheliograms (Mount Wilson) shows that the X-ray bright points tend to emerge randomly throughout the Ca network pattern. However, all those bright points that developed into active regions emerged at the boundaries of network cells. This suggests that the magnetic flux of active regions comes from greater depths in the convection zone than the shallow flux that gives rise to the random emergence of bright points.Also Physics Department, C-011, University of California at San Diego, La Jolla, Calif., U.S.A.     

Magnetic Lasso: A New Kinematic Solar Wind Propagation Method

Solar wind propagation from the point of measurement to an arbitrary target in the heliosphere is an important input for heliospheric, planetary and cometary studies. In this paper a new kinematic propagation method, the magnetic lasso method is presented. Compared to the simple ballistic approach our method is based on reconstructing the ideal Parker spiral connecting the target with the Sun by testing a previously defined range of heliographic longitudes. The model takes into account the eventual evolution of stream–stream interactions and handles these with a simple model based on the dynamic pressure difference between the two streams. Special emphasis is given to input data cleaning by handling interplanetary coronal mass ejection events as data gaps due to their different propagation characteristics. The solar wind bulk velocity is considered radial and constant. Density and radial magnetic field are propagated by correcting with the inverse square of the radial distance. The model has the advantage that it can be coded easily and fitted to the problem; it is flexible in selecting and handling input data and requires little running time.     

Assessment of cement’s dust impact on the soil using principal component analysis and GIS

To evaluate the impact of the cement’s dust emitted by the eastern Moroccan cement factory (Oujda Holcim) and deposited on the soil of the Ain Lahjar commune, 58 samples of soil were collected around the factory on a radius of 3 km approximately. The physicochemical analyses of the upper 3 cm of the soil surface samples correspond to the pH, electrical conductivity, the chlorides and the oxides of Ca, Al, Fe, K, Mn, S and Si which were analyzed by the fluorescence of X-rays. The preliminary results demonstrate that this dust are especially basic and contain a high free lime (43% CaO). The principal component analysis (applied on the 58 samples of soil) allows deducting that the free lime and the sulfur oxide are the tracer elements of this form of pollution. Furthermore, the spatial projection of the factor scores of the principal component analysis using the geographical information system permits to determine the spatial distribution of more polluted areas of soils as well as to estimate their surface (63.3% of the survey zone).     

Application of thermomagnetic analysis to picroilmenite investigation

Picroilmenite samples from five kimberlite pipes of the Yakutian kimberlite province have been studied. Point microprobe analyses of two mutually perpendicular profiles of each sample were carried out to study the compositional inhomogeneity of picroilmenite. Thermomagnetic curves were also recorded for each sample. A model for the processing of thermomagnetic curves is proposed on the basis of the relationship between the Curie point of picroilmenite and the content of the hematite end-member. The compositions determined by the thermomagnetic curves and microprobe analysis are rather similar. The conclusion has been drawn that thermomagnetic analysis can be used for the rapid determination of the picroilmenite composition. The possibilities and restrictions of this method are shown.