Quick clay—A case study of chemical perspective in Southwest Sweden

Quick clay, a soil that changes from normal firm ground to a liquid mass when it is disturbed, has been involved in most of the large and serious clay slides in Sweden, Norway and Canada. The location, time of occurrence and size of quick clay slides are difficult to predict and large slides may cause great devastation. Some geochemical studies of Swedish quick clay were done in the 1960s and early 1970s, but no systematic studies of the interrelationships of pore water chemistry, mineralogy, geotechnical properties and other parameters on quick clays in Sweden have been published. Such studies are of national and general interest because of the many combinations of rock flour source areas and sedimentation conditions that occurred across central Sweden and into the Baltic Sea area during deglaciation. In this study, geotechnical properties related to the in situ chemistry at one quick clay site were extensively studied, and spot sampling was conducted at two other locations in Southwest Sweden. In this area the clay minerals mainly are non-expanding phyllosilicate minerals (illite) and primary minerals (quartz, feldspar), which is consistent with previous studies of quick clay mineralogy. Extensive leaching has occurred at all three locations. At the extensively studied site, Surte, the lowest salinity was found at the greatest depth, inferring that the leaching by fresh water was accomplished by water movement upward and laterally through the sediment from the underlying bedrock. This is consistent with the local setting where bedrock hills rise sharply to over 100 m above the marine sediment surface. An artesian pressure would also be anticipated at this location. There is a correlation (negative) between sensitivity and salinity but there is an indication that the maximum salinity or electrical conductivity consistent with the quick clay behaviour is higher than reported elsewhere. However, for high sensitivities the salinity is about the same as reported elsewhere. In the deepest part of the borehole, there is a higher content of Fe and Al in the pore water, indicating reduced state. Further work is needed to confirm the difference in salinity and to investigate the possible interplay of salinity and potential dispersing agents such as the role of anoxic conditions, in this region. Further work is especially needed in the locations where the sediment accumulation occurred under lower salinity conditions. At all three locations, high remoulded shear strength and low sensitivity have been seen near the surface together with a decrease in pore water cation concentrations.     

Classification of marine bioregions on the east coast of South Africa

Marine bioregional planning requires a meaningful classification and spatial delineation of the ocean environment using biological and physical characteristics. The relative inaccessibility of much of the ocean and the paucity of directly measured data spanning entire planning regions mean that surrogate data, such as satellite imagery, are frequently used to develop spatial classifications. However, due to a lack of appropriate biological data, these classifications often rely on abiotic variables, which act as surrogates for biodiversity. The aim of this study was to produce a fine-scale bioregional classification, using multivariate clustering, for the inshore and offshore marine environment off the east coast of South Africa, adjacent to the province of KwaZulu-Natal and out to the boundary of the exclusive economic zone (EEZ), 200 nautical miles offshore. We used remotely sensed data of sea surface temperature, chlorophyll a and turbidity, together with interpolated bathymetry and continental-slope data, as well as additional inshore data on sediments, seabed oxygen and bottom temperature. A multivariate k-means analysis was used to produce a fine-scale marine bioregionalisation, with three bioregions subdivided into 12 biozones. The offshore classification was primarily a pelagic bioregionalisation, whereas the inshore classification (on the continental shelf) was a coupled benthopelagic bioregionalisation, owing to the availability of benthic data for this area. The resulting classification was used as a base layer for a systematic conservation plan developed for the province, and provided the methods for subsequent planning conducted for the entire South African EEZ. Validation of the classification is currently being conducted in marine research programmes that are sampling benthic biota and habitats in a sampling design stratified according to the biozones delineated in this study.     

Model calibration using hydropedological insights to improve the simulation of internal hydrological processes using SWAT+

Soils affect the distribution of hydrological processes by partitioning precipitation into different components of the water balance. Therefore, understanding soil-water dynamics at a catchment scale remains imperative to future water resource management. In this study, the value of hydropedological insights was examined to calibrate a processes-based model. Soil morphology was used as soft data to assist in the calibration of the Soil Water Assessment Tool (SWAT+) model at five different catchment scales (48, 56, 174, 674, and 2421 km²) in the Sabie River catchment, South Africa. The aim of this study was to calibrate the SWAT+ model to accurately simulate long-term monthly streamflow predictions as well as to reflect internal soil hydrological processes using a procedure focusing on hydropedology as a calibration tool in a multigauge system. Results indicated that calibration improved streamflow predictions where R² improved by 2%–8%. Nash-Sutcliffe Efficiency (NSE) improved from negative correlations to values exceeding 0.5 at four of the five catchment scales compared to the uncalibrated model. Results confirm that soil mapping units can be calibrated individually within SWAT+ to improve the representation of hydrological processes. Particularly, the spatial linkage between hydropedology and hydrological processes, which is captured within the soil map of the catchment, can be adequately reflected within the model simulations after calibration. This research will lead to an improved understanding of hydropedology as soft data to improve hydrological modelling accuracy.     

First evidence for the Cenomanian–Turonian oceanic anoxic event (OAE2, ‘Bonarelli’ event) from the Ionian Zone,western continental Greece

Integrated biostratigraphic (planktonic foraminifera, calcareous nannofossils), chemostratigraphic (bulk C and O isotopes) and compound-specific organic geochemical studies of a mid-Cretaceous pelagic carbonate—black shale succession of the Ionian Zone (western Greece), provide the first evidence for the Cenomanian–Turonian oceanic anoxic event (OAE2, ‘Bonarelli’ event) in mainland Greece. The event is manifested by the occurrence of a relatively thin (35 cm), yet exceptionally organic carbon-rich (44.5 wt% TOC), carbonate-free black shale, near the Cenomanian–Turonian boundary within the Vigla limestone formation (Berriasian–Turonian). Compared to the ‘Bonarelli’ black-shale interval from the type locality of OAE2 in Marche–Umbria, Italy, this black shale exhibits greatly reduced stratigraphic thickness, coupled with a considerable relative enrichment in TOC. Isotopically, enriched δ¹³C values for both bulk organic matter (−22.2‰) and specific organic compounds are up to 5‰ higher than those of underlying organic-rich strata of the Aptian-lower Albian Vigla Shale member, and thus compare very well with similar values of Cenomanian–Turonian black shale occurrences elsewhere. The relative predominance of bacterial hopanoids in the saturated, apolar lipid fraction of the OAE2 black shale of the Ionian Zone supports recent findings suggesting the abundance of N₂-fixing cyanobacteria in Cretaceous oceans during the Cenomanian–Turonian and early Aptian oceanic anoxic events.     

Adaptation in Canadian Agriculture to Climatic Variability and Change

The effects of climatic variability and change on Canadian agriculture have become an important research field since the early 1980s. In this paper, we seek to synthesize this research, focusing on agricultural adaptation, a purposeful proactive or reactive response to changes associated with climate, and influenced by many factors. A distinctive feature of methods used in research on adaptation in Canadian agriculture is the focus on the important role of human agency. Many individual farmers perceive they are well adapted to climate, because of their extensive 'technological' tool-kit, giving them confidence in dealing with climatic change. In many regions, little concern is expressed over climatic change, except where there are particular types of climatic vulnerability. Farmers respond to biophysical factors, including climate, as they interact with a complex of human factors. Several of these, notably institutional and political ones, have tended to diminish the farm-level risks stemming from climatic variability and change, but may well increase the long term vulnerability of Canadian agriculture. Notwithstanding the technological and management adaptation measures available to producers, Canadian agriculture remains vulnerable to climatic variability and to climate change.     

Eocene cool-water carbonate and biosiliceous sedimentation dynamics, St Vincent Basin, South Australia

Middle and Upper Eocene biogenic sediments in the Willunga Embayment along the eastern margin of the St Vincent Basin are a series of warm‐temperate limestones, marls and spiculites. The Middle Eocene Tortachilla Limestone is a thin, coarse grained, quartzose, biofragmental, bryozoan–mollusc calcarenite of stacked metre‐scale depositional cycles with hardground caps. Lithification, aragonite dissolution and the filling of moulds by sediment and cement characterize early marine‐meteoric diagenesis. Further meteoric diagenesis at the end of Tortachilla deposition resulted in dissolution, Fe‐oxide precipitation and calcite cementation. The Upper Eocene Blanche Point Formation is composed of coccolith and spiculite marl and spiculite, all locally rich in glauconite, turritellid gastropods and sponges. Decimetre‐scale units, locally capped by firmgrounds, have fossiliferous lower parts and relatively barren upper parts. Carbonate diagenesis is minor, with much aragonite still present, but early silicification is extensive, except in the spiculite, which is still opal‐A. All depositional environments are interpreted as relatively shallow water: high energy during the Middle Eocene and low energy during the Upper Eocene, reflecting the variable importance of a basin‐entrance archipelago of carbonate highs. Marls and spiculites are interpreted to have formed under an overall estuarine circulation system in a humid climate. Basinal waters, although well mixed, were turbid and rich in land‐derived nutrients, yet subphotic near the sea floor. These low‐energy, inner‐shelf biosiliceous sediments occur in coeval environments across other parts of Australia and elsewhere in the rock record, suggesting that they are a recurring element of the cool‐water, carbonate shelf depositional system. Thus, spiculites and spiculitic carbonates in the rock record need be neither deep basinal nor polar in origin. The paradox of a shallow‐water carbonate–spiculite association may be more common in geological history than generally realized and may reflect a characteristic mid‐latitude, humid climate, temperate water, palaeoenvironmental association.     

Complete metamorphic cycle and long-lived anatexis in the c. 2.1 Ga Mistinibi Complex,Canada

Secular changes in the architecture, thermal state, and metamorphic style of global orogens are thought to have occurred since the Archean; however, despite widespread research, the driving mechanisms for such changes remain unclear. The Paleoproterozoic may prove to be a key era for investigating secular changes in global orogens, as it marks the earliest stage of an eon that saw the onset of modern-style global tectonics. The 2.1 Ga granulite-facies Mistinibi-Raude Domain (MRD), located in the Southeastern Churchill Province, Canada, offers a rare exposure of Paleoproterozoic high metamorphic grade supracrustal sequences (Mistinibi Complex, MC). Rocks from this domain were subjected to petrochronological investigations to establish P–T–t–X evolutions and to provide first order thermal state, burial and exhumation rates, and metamorphic gradients for the transient Paleoproterozoic times. To obtain comprehensive insight into the P–T–t–X evolution of the MRD, we used multi-method geochronology—Lu–Hf on garnet and U–Pb on zircon and monazite—integrated with detailed petrography, trace element chemistry, and phase equilibria modelling. Despite the extensive use of zircon and monazite as geochronometers, their behaviour in anatectic conditions is complex, leading to substantial ambiguity in interpreting the timing of prograde metamorphism. Our results indicate a clockwise metamorphic path involving significant melt extraction from the metasedimentary rocks, followed by cooling from >815°C to ~770°C at ~0.8 GPa. The timing of prograde burial and cooling from supra- to subsolidus conditions is constrained through garnet, monazite, and zircon petrochronology at 2,150–2,120 Ma and at 2,070–2,080 Ma, respectively. These results highlight long-lived residence of the rocks at mid-crustal supra-solidus conditions (55–70 Ma), with preserved prograde and retrograde supra-solidus monazite and zircon. The rocks record extremely slow burial rates (0.25–0.30 km/Ma) along a high metamorphic gradient (900–1,000°C/GPa), which appears symptomatic of Paleoproterozoic orogens. The MC did not record any significant metamorphism after 2,067 Ma, despite having collided with terranes that record high-grade metamorphism during the major 1.9–1.8 Ga Trans-Hudson orogeny. The MC would therefore represent a remnant of a local early Paleoproterozoic metamorphic infrastructure, later preserved as superstructure in the large hot Trans-Hudson orogen.     

A three-invariant smooth cap model with mixed hardening

A cap model is presented that uses a multiplicative formulation to define a smooth (continuous derivative) failure surface that includes the third stress invariant. This formulation offers several advantages over previous cap model formulations: elimination of ‘corner’ coding, resulting in a numerical algorithm suitable for vectorization; a three stress invariant implementation that is easily specialized to classical failure surfaces or generalized to represent observed material response; and a framework for easily implementing additional model features such as kinematic hardening as demonstrated.     

RESIDENT ATTITUDES TOWARD EXURBAN DEVELOPMENT IN A RURAL ONTARIO TOWNSHIP

Rural areas proximate to urban centers have recently experienced substantial exurban development. This paper examines attitudes of residents in a rural township in southern Ontario toward further residential development both in the open countryside and in small villages. The Fishbein attitude model provides the conceptual framework for the empirical analysis. Residents associate a variety of attributes with development, including higher land values and improvements in services. Attitudes toward residential development are shown to be heterogeneous, although they are not well differentiated between farm, nonfarm, and village residents.