Holocene carbonate sedimentation on the west Eucla Shelf, Great Australian Bight: a shaved shelf

The southern continental margin of Australia is a cool-water carbonate sedimentary province located in a high-energy, swell-dominated oceanographic setting. A vibrocore transect of ¹⁴C-dated sediments across the centre of the Eucla Shelf is the first record of Holocene shelf deposition in the Great Australian Bight. Much of the seafloor shallower than 70 m water depth, the base of wave abrasion, is bare Cenozoic limestone, in some places encrusted by (?) Late Pleistocene, coral-rich, limestone that is cemented by high-magnesium calcite (12 mole% MgCO₃). The areally extensive, 100 km-wide, hard, bored substrate supports an epibiota of coralline algae, minor bryozoans and soft algae or is covered by patches of Holocene sediment up to 1.5 m thick; generally a basal bivalve lag (< 3 ka) overlain by quartzose-bioclastic palimpsest sand. This pattern of active carbonate production but little accretion on the wave-swept mid- to inner-shelf is similar to that on other parts of the southern Australian continental margin. The term shaved shelf is proposed for this style of carbonate platform, formed by alternating periods of sediment accretion, cementation and erosion.

The palimpsest sand is typically rich in bivalves, coralline algae and locally, detrital dolomite. Outer shelf Holocene sediment, below the base of wave abrasion but inboard of the shelf edge, is a metre-thick unit of fine, microbioclastic muddy sand with minor delicate bryozoans overlying a 9–13 ka rhodolith gravel. Some of this outer shelf sediment appears to have been resedimented. The shelf edge is a sandy and rocky seafloor with active bryozoan growth and sediment production.

The Holocene sediments are enriched in coralline algal particles and conspicuous large foraminifers (cf. Marginopora) and depleted in bryozoans, as compared to coeval deposits on the Lacepede and Otway shelves off southeastern Australia. These differences are interpreted to reflect warmer waters of the Leeuwin Current and prevalent downwelling in this area as opposed to the general upwelling and colder waters in the east.     

Energetic and spatial characterization of seismicity in the Algeria–Morocco region

We estimate the energetic and spatial characteristics of seismicity in the Algeria–Morocco region using a variety of seismic and statistical parameters, as a first step in a detailed investigation of regional seismic hazard. We divide the region into five seismotectonic regions, comprising the most important tectonic domains in the studied area: the Moroccan Meseta, the Rif, the Tell, the High Plateau, and the Atlas. Characteristic seismic hazard parameters, including the Gutenberg–Richter b-value, mean seismic activity rate, and maximum possible earthquake magnitude, were computed using an extension of the Aki–Utsu procedure for incomplete earthquake catalogs for each domain, based on recent earthquake catalogs compiled for northern Morocco and northern Algeria. Gutenberg–Richter b-values for each zone were initially estimated using the approach of Weichert (Bull Seismol Soc Am 70:1337–1346, 1980): the estimated b-values are 1.04 ± 0.04, 0.93 ± 0.10, 0.72 ± 0.03, 0.87 ± 0.02, and 0.77 ± 0.02 for the Atlas, Meseta, High Plateau, Rif, and Tell seismogenic zones, respectively. The fractal dimension D ₂ was also estimated for each zone. From the ratio D ₂/b, it appears that the Tell and Rif zones, with ratios of 2.09 and 2.12, respectively, have the highest potential earthquake hazard in the region. The Gutenberg–Richter relationship analysis allows us to derive that in the Tell and Rif, the number of earthquake with magnitude above Mw 4.0, since 1925 normalized to decade and to square cell with 100-km sides is equal to 2.6 and 1.91, respectively. This study provides the first detailed information about the potential seismicity of these large domains, including maximum regional magnitudes, characteristics of spatial clustering, and distribution of seismic energy release.     

A GIS approach to seismic risk assessment with an application to mining-related seismicity in Johannesburg,South Africa

The majority of seismic activity in South Africa is related to extensive mining operations, usually in close proximity to densely populated areas where a relatively weak seismic event could cause damage. Despite a significant decrease in mining operations in the Witwatersrand area, the number of seismic events appears to be increasing and is attributed to the acid mine drainage problem. The increased seismicity is raising concern amongst disaster management centres and in the insurance industry. A better understanding is required of the vulnerability and the size of the potential loss of people and infrastructure in densely populated Johannesburg and its surrounding areas. Results of a deterministic seismic risk, vulnerability, and loss assessment are presented by making use of a geographic information system (GIS). The results illustrate the benefits of using GIS and contribute to a better understanding of the risk, which can assist in improving disaster preparedness.     

Community collaboration and climate change research in the Canadian Arctic

Research on climate change impacts, vulnerability and adaptation, particularly projects aiming to contribute to practical adaptation initiatives, requires active involvement and collaboration with community members and local, regional and national organizations that use this research for policy-making. Arctic communities are already experiencing and adapting to environmental and socio-cultural changes, and researchers have a practical and ethical responsibility to engage with communities that are the focus of the research. This paper draws on the experiences of researchers working with communities across the Canadian Arctic, together with the expertise of Inuit organizations, Northern research institutes and community partners, to outline key considerations for effectively engaging Arctic communities in collaborative research. These considerations include: initiating early and ongoing communication with communities, and regional and national contacts; involving communities in research design and development; facilitating opportunities for local employment; and disseminating research findings. Examples of each consideration are drawn from climate change research conducted with communities in the Canadian Arctic.     

The influence of basin setting and turbidity current properties on the dimensions of submarine lobe elements

Submarine lobes have been identified within various deep-water settings, including the basin-floor, the base of slope and the continental slope. Their dimensions and geometries are postulated to be controlled by the topographic configuration of the seabed, sediment supply system and slope gradient. Ten experiments were conducted in a three-dimensional-flume to study the depositional characteristics of submarine lobes associated with: (i) different basin floor gradients (0 to 4°); (ii) different sediment concentrations of the parent turbidity current (11 to 19% vol); and (iii) varying discharge (25 to 40 m³ h⁻¹). Most runs produced lobate deposits that onlapped onto the lower slope. Deposit length was proportional to basin-floor angle and sediment volume concentration. A higher amount of bypass is observed in the proximal area as the basin-floor angles get steeper and sediment concentrations higher. Deposits of runs with lower discharge could be traced higher upslope while runs with higher discharge produced an area of low deposition behind the channel mouth, i.e. discharge controlled whether lobe deposits were attached or detached from their channel-levée systems. A particle-advection-length scale analysis suggests that this approach can be used as a first order estimation of lobe element length. However, the estimations strongly depend on the average grain size used for calculations (for example, silt is still actively transported after all sand has been deposited) and the method cannot be used to locate the main depocentre. Furthermore, attempted reconstructions of turbidity current velocities from natural systems suggest that the method is not appropriate for use in inversions from more complex composite bodies such as lobes.     

A conceptual model of vegetation dynamics in the semiarid Highland savanna of Namibia, with particular reference to bush thickening by Acacia mellifera

Namibian rangelands are encroached with Acacia mellifera, partially resulting from a poor understanding of vegetation dynamics. A conceptual state-and-transition model of vegetation dynamics in the semiarid Highland savanna in central Namibia, emphasising bush thickening by A. mellifera, is described. Two main states, a grassy and a bushy state, are identified. These are further subdivided, and 11 transitions are identified. The key transition initiating a change from grassy to bushy state can be termed a “leap” (an occasional, infrequent mass recruitment event) following a long “sleep” (no or little change in A. mellifera density). It is rare because it requires three consecutive years of above-average rainfall for seedling establishment. Fire, coinciding with seedling establishment, can interrupt it, while a low biomass grass sward facilitates it. The phenology and physiology of the encroaching species, seed predation and sapling herbivory influence this transition. The model proposes opportunistic management interventions, particularly the use of fire, to minimise the risk of further landscape-scale transitions to a bushy state. It highlights areas where understanding of vegetation dynamics is lacking and recommends crucial research foci. Conceptual models of bush-thickening processes need to account for differences in climate and phenological details of encroaching species.     

Modelling the distribution of hard seabed using calibrated multibeam acoustic backscatter data in a tropical,macrotidal embayment: Darwin Harbour,Australia

Spatial information on the distribution of seabed substrate types in high use coastal areas is essential to support their effective management and environmental monitoring. For Darwin Harbour, a rapidly developing port in northern Australia, the distribution of hard substrate is poorly documented but known to influence the location and composition of important benthic biological communities (corals, sponges). In this study, we use angular backscatter response curves to model the distribution of hard seabed in the subtidal areas of Darwin Harbour. The angular backscatter response curve data were extracted from multibeam sonar data and analysed against backscatter intensity for sites observed from seabed video to be representative of “hard” seabed. Data from these sites were consolidated into an “average curve”, which became a reference curve that was in turn compared to all other angular backscatter response curves using the Kolmogorov–Smirnov goodness-of-fit. The output was used to generate interpolated spatial predictions of the probability of hard seabed (p-hard) and derived hard seabed parameters for the mapped area of Darwin Harbour. The results agree well with the ground truth data with an overall classification accuracy of 75% and an area under curve measure of 0.79, and with modelled bed shear stress for the Harbour. Limitations of this technique are discussed with attention to discrepancies between the video and acoustic results, such as in areas where sediment forms a veneer over hard substrate.     

The stratigraphic record and processes of turbidity current transformation across deep‐marine lobes

Sedimentary facies in the distal parts of deep‐marine lobes can diverge significantly from those predicted by classical turbidite models, and sedimentological processes in these environments are poorly understood. This gap may be bridged using outcrop studies and theoretical models. In the Skoorsteenberg Formation (South Africa), a downstream transition from thickly bedded turbidite sandstones to argillaceous, internally layered hybrid beds, is observed. The hybrid beds have a characteristic stratigraphic and spatial distribution, being associated with bed successions which generally coarsen and thicken‐upward reflecting deposition on the fringes of lobes in a dominantly progradational system. Using a detailed characterization of bed types, including grain size, grain‐fabric and mineralogical analyses, a process‐model for flow evolution is developed. This is explored using a numerical suspension capacity model for radially spreading and decelerating turbidity currents. The new model shows how decelerating sediment suspensions can reach a critical suspension capacity threshold beyond which grains are not supported by fluid turbulence. Sand and silt particles, settling together with flocculated clay, may form low yield strength cohesive flows; development of these higher concentration lower boundary layer flows inhibits transfer of turbulent kinetic energy into the upper parts of the flow ultimately resulting in catastrophic loss of turbulence and collapse of the upper part of the flow. Advection distances of the now transitional to laminar flow are relatively long (several kilometres) suggesting relatively slow dewatering (several hours) of the low yield strength flows. The catastrophic loss of turbulence accounts for the presence of such beds in other fine‐grained systems without invoking external controls or large‐scale flow partitioning and also explains the abrupt pinch‐out of all divisions of these sandstones. Estimation of the point of flow transformation is a useful tool in the prediction of heterogeneity distribution in subsurface systems.     

Migration as an Adaptation to Climate Change

This article presents a conceptual model to investigate population migration as a possible adaptive response to risks associated with climate change. The model reflects established theories of human migration behaviour, and is based upon the concepts of vulnerability, exposure to risk and adaptive capacity, as developed in the climate change research community. The application of the model is illustrated using the case of 1930s migration patterns in rural Eastern Oklahoma, which took place during a period of repeated crop failures due to drought and flooding.