Optimal placement of sensors on buildings subjected to intermediate‐storey excitation according to QN control method

An algorithm to calculate direct velocity feedback gain with limited number of sensors is developed in a simple way such that a certain performance index is minimized according to QN control method. If a limited number of velocity outputs can be measured, full velocity responses of the whole structure can be interpolated based on the mode shapes. By defining the performance index function as a combination of the structure's velocity responses and control forces only, feedback gain can be determined according to QN control method with the external excitation being taken into account throughout the entire algorithm. Control forces are then regulated by the time‐invariant feedback gain matrix. The effective location of the active control devices for a building structure subjected to intermediate‐storey excitation has been determined to be in the three floors adjacent to the vibration source. Hence for the purpose of this paper, only the optimal placement of sensors is verified. It is shown in this paper that if the dynamic behaviour of the structure is well described by a mathematical model, sufficient response reduction effect can be achieved according to the new DVFC algorithm, and the degradation of control performance due to time delay can also be verified. Copyright © 2001 John Wiley & Sons, Ltd.     

Potential of Oil Palm Trunk Sap as a Novel Inexpensive Renewable Carbon Feedstock for Polyhydroxyalkanoate Biosynthesis and as a Bacterial Growth Medium

Utilization of cheap renewable carbon feedstock for polyhydroxyalkanoate (PHA) production not only brings down its production cost but also ensures sustainability. The scope of this study was to evaluate the potential of sap extracted from felled oil palm trunk (OPT) as a novel inexpensive renewable carbon source for PHA production. OPT sap was found to be nutritionally rich and contained various fermentable sugars (5.5% w/v) as its major constituent. Termite gut isolate, Bacillus megaterium MC1 grew profoundly in mineral medium with OPT sap as carbon source and a cell density of 10.9 g/L was attained after 16 h of cultivation in shake flask cultures. A maximum poly‐3‐hydroxybutyrate [P(3HB)] content (% cell dry weight; CDW) of 30 wt% and a P(3HB) concentration of 3.28 g/L was recorded. Additionally, OPT sap extracted from younger tree trunks with prolonged storage had higher sugar content (10.8% w/v) and, when used as a growth medium without the addition of any nutrients, supported bacterial growth comparable to commercially available media.     

Geology of the summit limestone of Mount Qomolangma (Everest) and cooling history of the Yellow Band under the Qomolangma detachment

Abstract   Newly discovered peloidal limestone from the summit of Mount Qomolangma (Mount Everest) contains skeletal fragments of trilobites, ostracods and crinoids. They are small pebble-sized debris interbedded in micritic bedded limestone of the Qomolangma Formation, and are interpreted to have been derived from a bank margin and redeposited in peri-platform environments. An exposure of the Qomolangma detachment at the base of the first step (8520 m), on the northern slope of Mount Qomolangma was also found. Non-metamorphosed, strongly fractured Ordovician limestone is separated from underlying metamorphosed Yellow Band by a sharp fault with a breccia zone. The ⁴⁰Ar–³⁹Ar ages of muscovite from the Yellow Band show two-phase metamorphic events of approximately 33.3 and 24.5 Ma. The older age represents the peak of a Barrovian-type Eo-Himalayan metamorphic event and the younger age records a decompressional high-temperature Neo-Himalayan metamorphic event. A muscovite whole-rock ⁸⁷Rb–⁸⁶Sr isochron of the Yellow Band yielded 40.06 ± 0.81 Ma, which suggests a Pre-Himalayan metamorphism, probably caused by tectonic stacking of the Tibetan Tethys sediments in the leading margin of the Indian subcontinent. Zircon and apatite grains, separated from the Yellow Band, gave pooled fission-track ages of 14.4 ± 0.9 and 14.4 ± 1.4 Ma, respectively. These new chronologic data indicate rapid cooling of the hanging wall of the Qomolangma detachment from approximately 350°C to 130°C during a short period (15.5–14.4 Ma).     

Determination of Uranium in Thirty-six Geological Reference Samples by Fluorimetry and Extractive Spectrophotometry

The uranium contents of 36 geological reference samples have been determined by fluorimetry after ion-exchange separation, and spectrophotometry using Arsenazo III after solvent extraction with tri-n-octylphosphine oxide. The agreement between present results and published data is generally good. The methods of fluorimetry and spectrophotometry proved very convenient in the determination of uranium in geological materials.     

Water wedge advancing along the interface between two homogeneous layers

The behavior of the water wedge advancing along the interface between two homogeneous layers is investigated experimentally. The horizontally intruding wedge is strongly influenced by the detailed structure of the interface, even when the interface is sharp enough for its position to be visually determined. Within our experimental range, the intrusion velocity is very slow and depends on the thickness of the interface along which the water wedge intrudes. The wedge length is well described by the relation which is derived using an analogy to the linearly stratified case. The results could be useful for understanding the generation mechanism of the oceanic microstructure.     

Behavior of fresh water injected at the surface of a uniformly rotating ocean

The behavior of low density fresh water injected at the surface of a uniformly rotating saline water was investigated on the basis of a tank experiment. The injected water mass shows a clockwise circulation and grows gradually with an axisymmetric convex shape, until it breaks into two vortices at a critical size. An experimental formula for the change of radius of the water mass with time for the axisymmetric stage is obtained. It is shown that within our experimental range of values the radius of the water mass increases almost in proportion tot ^1/2, wheret is the elapse time, while the inviscid theory indicates that the radius should increase in proportion tot ^1/4. The dependence of the radius on elapse time is essential for forecasting the extent of discharged waters. The position of the maximum azimuthal velocity is fixed at \(V = - ge^{ - a^2 q^2 } \) within our experimental range of values wherer is the radial coordinate,f the Coriolis parameter,v the viscosity coefficient andQ the flow rate of injection, respectively. This radius corresponds to the radial scale derived by Gillet al. (1979). The steadiness of the position of the maximum azimuthal velocity may be essential in partition of the water mass into inner and outer regions and in the understanding the derived experimental formula. The critical radius for breaking is also investigated. The radius is shown to be independent ofQ and to be almost proportional to (Δ _ρ / _ρ )^1/2 f ^-1 whereρ is the density of the saline water andΔρ the density difference between the saline and injected waters. Even after the water supply is cut off in the axisymmetric stage, the radius of the water mass increases at almost the same rate as before, while its thickness decreases. The behavior after supply cut-off is discussed in the Appendix.     

Changes in the lower limit of mountain permafrost between 1973 and 2004 in the Khumbu Himal, the Nepal Himalayas

Because the Khumbu Himal of the Nepal Himalayas lacks long-term climate records from weather stations, mountain permafrost degradation serves as an important indicator of climate warming. In 1973, the permafrost lower limit was estimated to be 5200–5300 m above sea level (ASL) on southern-aspect slopes in this region. Using ground-temperature measurements, we examined the mountain permafrost lower limit on slopes with the same aspect in 2004. The results indicate that the permafrost lower limit was 5400–5500 m ASL in 2004. The permafrost lower limit was estimated to be 5400 to 5500 m on slopes with a southern aspect in the Khumbu Himal in 1991 using seismic reflection soundings. Thus, it is possible that the permafrost lower limit has risen 100–300 m between 1973 and 1991, followed by a stable limit of 5400 to 5500 m over the last decade. An increase in mean annual air temperature of approximately 0.2 to 0.4 °C from the 1970s to the 1990s has indicated a rise in the permafrost lower limit of 40 to 80 m at the Tibetan Plateau. The rise in the mountain permafrost lower limit in the Khumbu Himal exceeds that of the Tibetan Plateau, suggesting the possibility of greater climate warming in the Khumbu Himal.     

Evolutionary tracks of the terrestrial planets

On the basis of the model proposed by Matsui and Abe, we will show that two major factors — distance from the Sun and the efficiency of retention of accretional energy — control the early evolution of the terrestrial planets. A diagram of accretional energy versus the optical depth of a proto-atmosphere provides a means to follow the evolutionary track of surface temperature of the terrestrial planets and an explanation for why the third planet in our solar system is an aqua-planet.     

A magnetodynamic mechanism for loop flares

Loop flares are given a new magnetodynamic interpretation. In this model, the top of the magnetic loop is heated up by a collision of magnetic twist-wave packets (non-linear torsional Alfven wave) which are produced in the process of the loop emergence, and stored and released from the footpoints of the loop with some retardation. The appearance of the blueshifted component in CaXIX and FeXXV lines a minute or so before the impulsive phase, and the so-called “instantaneous acceleration” of ions deduced from the nearly simultaneous (with a delay of seconds) occurrence of γ-ray line emission with the impulsive hard X rays, are very naturally explained in the present model which originally aims at providing an explanation of the source of energy, a “blackbox” located at the top of the loop in the loop flare theories discussed thus far.

     

Climate control on Venus: Comparison of the carbonate and pyrite models

We review two models describing the Venus climate system: the carbonate and pyrite models. It has been argued carbonate and pyrite are potentially important minerals controlling the climate of Venus, though existence of either minerals has not been confirmed. Although it used to be proposed that carbonation reaction might explain the Venus’ atmospheric CO₂ abundance, it is unlikely Venus’ surface is reactive enough to control the Venus’ massive CO₂ atmosphere. Venus’ surface carbonate is also able to affect the climate through the reaction with atmospheric SO₂ to form anhydrite. Under the carbonate model the climate state is not in equilibrium and would be unstable due to the reaction between carbonate and SO₂. On the other hand, pyrite-magnetite reaction is proposed to explain the Venus’ atmospheric SO₂ abundance. Under pyrite-magnetite reaction, however, the climate would be stabilized such that the existing climate state is maintained over a geological timescale, while some observational facts such as atmospheric abundance of SO₂ and surface temperature could also be reasonably explained.